Abstract:Stirred tanks are widely used in many industrial processes.In this paper,the mixing process of industry crystallizer was simulated three-dimensionally by computational fluid dynamics(CFD).The multi-reference frame(MRF) and standard k-e turbulent model were used in the simulation to analyze the effect of the propeller structure,rotational speed and the distance of impeller location on the flow field in the crystallizer.The simulation results show that the velocity distributes mainly on the area in the interior draft tube and between the interior and exterior draft tube.Therefore,according to the notable difference of velocity at different areas,the crystallizer can be divided into approximately two zones based on the different effects in the flow processes of crystallization:the cycle zone with high velocity speed inside the draft tube and the sedimentation zone with low velocity speed outside the draft tube.Through comparison of velocity contour between cycle zone and sedimentation zone,propeller is proved to be more suitable than others,and the best distance of impeller location in the system is from 3.5 m to 5.7 m.The uniform velocity rate of fluid flow upward at the sedimentation zone engendered through the appropriate rotational speed can bring out the small crystals and is favorable for large particle size products.The detailed flow field in the stirred tank and different operation parameters can provide theoretical guidance to optimize the structure and operation parameter in the industrial scale.The industrial results show that the product particle size has been significantly increased,and the proportion of particles more than 0.2 mm increases from less than 50% to more than 90%.Natural gas consumption for drying products is decreased from 22 m~3/t to 15 m~3/t.The energy is remarkable saved.

CFD Simulation and Process Intensification of LiH Synthesis Reactor

Hydrodynamics in a Novel Gas-Liquid Cocurrent Bubble Reactor and its CFD Simulation

CFD Simulation for Up Flow Jet-Loop Reactors by Use of Bi-Dispersed Bubble Model

CFD Modelling of the Effects of Local Turbulence Intensification on Synthesis of LiFePO4 Particles in an Impinging Jet Reactor

Modelling of Turbulent Shear Controllable Co-Precipitation Synthesis of Lithium Ion Battery Cathode Precursor Micro-Particles in a Taylor-Couette Flow Reactor with Variable Configurations of Inner Cylinder

CFD simulation of cross flow in multi-tubular fixed-bed reactor of industrial level

Prediction of Bubble Fluidisation During Chemical Looping Combustion Using CFD Simulation

Numerical Study on the Process of Chemical Looping Hydrogen Production with Multiple Circulating Fluidized Bed Reactors

CFD Simulation of Shear Flow and Mixing in a Taylor–Couette Reactor with Variable Cross-Section Inner Cylinders

Simulation and enhancement of axial temperature distribution in a reactor filled with in-situ electrically heated structured catalyst

Cfd Simulation of the Hydrodynamics in an Industrial Scale Cyclohexane Oxidation Airlift Loop Reactor

CFD Simulation with Detailed Chemistry of Steam Reforming of Methane for Hydrogen Production in an Integrated Micro-Reactor

Computational Fluid Dynamics Modeling and Mass Transfer Study of an in Situ Gas Production Process

Comprehensive CFD Simulation of the Optimizations of Geometric Structures and Operating Parameters for Industrial Acetylene Hydrogenation Reactors

Numerical Simulation of Mixing Process in Industry Crystallizer

Hydrodynamic simulation of fuel-reactor in chemical looping combustion process

Progress on CFD simulation of gas-liquid two-phase flow in stirred tank reactor

Computational Fluid Dynamics Simulation and Experimental Study on Mixing Performance of a Three-Dimensional Circular Cyclone-Type Microreactor

Simulation of Gas-Solid Fluidized Bed Reactor for F-T Synthesis

Multiphysics Numerical Simulation Model and Hydraulic Model Experiments in the Argon-Stirred Ladle

Study on the FCC process of a novel riser-downer coupling reactor (III): Industrial trial and-CFD modeling