Abstract:Wavy fins have been considered as an alternative of the straight fins in compact heat exchangers (CHEs) for better heat transfer performance, which can be augmented by considering vortex generators (VGs). This work is related to numerical investigation and optimization of corrugation height of fin and angle of attack of delta winglet type VGs in a wavy fin-and-tube heat exchanger. For this purpose, three-dimensional (3D) Reynolds-averaged Navier-Stokes analysis and a multi-objective genetic algorithm (MOGA) with surrogate modeling are performed. Numerical simulation is carried out to study the effect of delta winglets with varying the corrugation height of wavy fin in three rows of tubes with staggered tube arrangements. The corrugation height (H) and angle of attack (alpha) vary from 0.3 mm to 1.8 mm and 15 deg to 75 deg, respectively. Results are illustrated by investigating the flow structures and temperature contours. Results show that increasing the corrugation height of wavy fin and angle of attack of delta winglets enhances the heat transfer performance of heat exchanger while friction factor is also increased. Employing delta winglets has augmented the thermal performance for all corrugation heights and superior effect is observed at a higher corrugation. To achieve a maximum heat transfer enhancement and a minimum pressure drop, the optimal values of these parameters (H and alpha) are calculated using the Pareto optimal strategy. For this purpose, computational fluid dynamics (CFD) data, a surrogate model (neural network), and a multi-objective GA are combined. Results show that optimal orientation of delta winglets with respect to corrugation height can improve both the thermal and hydraulic performance of the heat exchanger.

Numerical Studies on Heat Transfer Enhancement by Hollow-Cross Disk for Cracking Coils

Computational fluid dynamics assisted design of cracking coils

Novel Cracking Coil Design Based on Positive Constructing of Synergetic Flowing Field

Turbulent Mixing Enhancement of Thermal Cracking Coil by Hollow Cross Disk Internal

Heat Transfer Study of a Hybrid Smooth and Spirally Corrugated Tube

Numerical investigation of convective heat transfer enhancement by a combination of vortex generator and in-tube inserts

Numerical Study of Flow and Heat Transfer Enhancement of Circular Tube Bank Fin Heat Exchanger with Curved Delta-Winglet Vortex Generators

Experimental Research on Heat Transfer Enhancement by a Wall-Proximity Circular Cylinder under an Axial Magnetic Field

Numerical Analysis on Heat Transfer Enhancement by Longitudinal Vortex Based on Field Synergy Principle

Numerical Analysis to Vortex Heat Transfer Enhancement Based on Field Synergy Principle

Numerical investigation of flow and heat transfer between concentric cylinders with slit wall

Numerical study and mechanism analysis of heat transfer in a helical tube enhanced by sinusoidal pulsating flow combined with an annular corrugated structure

Spiral Coil Inserts for Heat Transfer Enhancement in a Parallel-Plate Channel

Numerical Study on Flow Structure and Heat Transfer in a Circular Tube Integrated with Novel Anchor Shaped Inserts

Numerical investigation of heat transfer using a novel punched vortex generator

Numerical simulations of MHD effect on convective heat transfer characteristics in bubbles coalescence process

Active Enhancement of Convection Heat Transfer of Air in a Rectangular Channel by Magnetically Induced Longitudinal Vortices

Numerical Investigation on Flow and Heat Transfer Performance of Non-Newtonian Bingham Fluid in Novel Spiral Wound Tube Heat Exchangers

Numerical study on turbulent heat transfer performance of twisted oval tube with different cross sectioned wire coil

Influence of key geometry parameters on heat transfer and flow resistance properties of toothed internal spiral piece cracking furnace tube

Numerical Study And Optimization Of Corrugation Height And Angle Of Attack Of Vortex Generator In The Wavy Fin-And-Tube Heat Exchanger