Abstract:Winglet vortex generators (WVGs) mounted inside a circular tube, generate longitudinal vortices and offer increased turbulence level with a comparatively lower pressure penalty for a higher heat exchange performance. In this study, the thermal enhancement and flow structure arising from radially-arrayed winglets mounted at different attack and inclination angles, as well as different winglet lengths, are analyzed by CFD simulation. The flow and heat transfer behaviors are presented in the turbulent flow region for air flow, with Reynolds number ranging from 6000 to 27,000. Vortex generators are arranged inside the tube as a series of four rings, with each ring having 4 WVGs on the inner surface of a circular tube. The present research investigates the characteristics of WVGs which include four winglet inclination angles (α = 0°, 10°, 20° and 30°), five winglet attack angle (β = 0°, 10°, 20°, 30°, and 45°), and three winglet lengths (L = 10 mm, 15 mm, 20 mm). The data shows that winglets in a tube result in a considerable enhancement of Nusselt number and friction factor. It is found that Nusselt number and friction factor augment with the increase of attack angle or length, yet declines with the increase of inclination angle. The maximum of Nu is 86.88, at L = 20 mm, PR = 4.8, α = 0°, and β = 45°. The largest Nusselt number ratio, Nu/Nu0, defined as a ratio of augmented Nusselt number to the Nusselt number for fully developed smooth flow is 136%, which was obtained at a lower Reynolds number (Re = 6000). The results also illustrated that WVGs could generate longitudinal and transverse vortices to induce both impingement flow and recirculation zone leading to higher heat transfer and comparatively lower pressure drop. Nusselt number contours reveal that the wake zone behind WVGs displays the intensity of heat transfer along the tube.

Numerical Study on Flow Structure and Heat Transfer in a Circular Tube Integrated with Novel Anchor Shaped Inserts

Internal Flow Analysis of a Heat Transfer Enhanced Tube with a Segmented Twisted Tape Insert

A Numerical Study on Thermo-Hydraulic Characteristics of Turbulent FLow in a Circular Tube Fitted with Conical Strip Inserts

Heat transfer in a turbulent flow tube integrated with tori as vortex generator inserts

A numerical study on the flow over a novel tube for heat-transfer enhancement with a linear Eddy-viscosity model

Numerical study and mechanism analysis of heat transfer in a helical tube enhanced by sinusoidal pulsating flow combined with an annular corrugated structure

Heat Transfer and Flow Characteristics in a Circular Tube Fitted with Rectangular Winglet Vortex Generators

Numerical and Experimental Investigations of Micro Thermal Performance in a Tube with Delta Winglet Pairs

Heat Transfer Augmentation and Flow Visualization With Delta Winglets in a Tube: A Numerical Approach

Numerical simulation study of enhanced convective heat transfer in the tube based on winglet vortex generator

Numerical study of heat transfer and flow behavior in a circular tube fitted with varying arrays of winglet vortex generators

Structural Optimization of Self-Supporting Rectangular Converging-Diverging Tube Heat Exchanger

Numerical Analysis on Heat Transfer Enhancement by Longitudinal Vortex Based on Field Synergy Principle

Numerical Analysis to Vortex Heat Transfer Enhancement Based on Field Synergy Principle

Numerical Study of Flow and Heat Transfer Enhancement by Using Delta Winglets in a Triangular Wavy Fin-and-Tube Heat Exchanger

Enhancing thermal performance: a sophisticated analysis of CuO-water nanofluids and twisted tape inserts in tubular heat exchangers-a numerical study

Thermo-hydraulic characteristic investigation of a circular tube inserted with constructal bifurcation semi-pipes by numerical simulation and PIV experiments

Numerical study on flow and heat transfer characteristics of a novel centrosymmetric tube with bent inner fins based on experiment

Numerical Study of a Heat Exchanger with a Rotating Tube Using Nanofluids under Transitional Flow

Thermal Characteristic of a Turbulent Flow Through a Circular Tube Fitted with Perforated Vortex Generator Inserts

Numerical Study Of Flow And Heat Transfer In Rectangular Channel With Periodic Longitudinal Vortex Generators Under Pulsating Flow