Abstract:Purpose: Monitoring tumor response during the course of treatment and adaptively modifying treatment plan based on tumor biological feedback may represent a new paradigm for radiotherapy. Diffusion MRI has shown great promises in assessing and predicting tumor response to radiotherapy. However, the conventional diffusion-weighted single-shot echo-planar-imaging (DW-ssEPI) technique suffers from limited resolution, severe distortion, and possibly inaccurate ADC at low field strength. The purpose of this work was to develop a reliable, accurate and distortion-free diffusion MRI technique that is practicable for longitudinal tumor response evaluation and adaptive radiotherapy on a 0.35 T MRI-guided radiotherapy system. Methods: A diffusion-prepared turbo spin echo readout (DP-TSE) sequence was developed and compared with the conventional diffusion-weighted single-shot echo-planar-imaging sequence on a 0.35 T MRI-guided radiotherapy system (ViewRay). A spatial integrity phantom was used to quantitate and compare the geometric accuracy of the two diffusion sequences for three orthogonal orientations. The apparent diffusion coefficient (ADC) accuracy was evaluated on a diffusion phantom under both 0 degrees C and room temperature to cover a diffusivity range between 0.40 x 10(-3) and 2.10 x 10(-3) mm(2)/s. Ten room temperature measurements repeated on five different days were conducted to assess the ADC reproducibility of DP-TSE. Two glioblastoma (GBM) and six sarcoma patients were included to examine the in vivo feasibility. The target registration error (TRE) was calculated to quantitate the geometric accuracy where structural CT or MR images were co-registered to the diffusion images as references. ADC maps from DP-TSE and DW-ssEPI were calculated and compared. A tube phantom was placed next to patients not treated on ViewRay, and ADCs of this reference tube were also compared. Results: The proposed DP-TSE passed the spatial integrity test (< 1 mm within 100 mm radius and < 2 mm within 175 mm radius) under the three orthogonal orientations. The detected errors were 0.474 0.355 mm, 0.475 +/- 0.287 mm, and 0.546 +/- 0.336 mm in the axial, coronal, and sagittal plane. DW-ssEPI, however, failed the tests due to severe distortion and low signal intensity. Noise correction must be performed for the DW-ssEPI to avoid ADC quantitation errors, whereas it is optional for DP-TSE. At 0 degrees C, the two sequences provided accurate quantitation with < 3% variation with the reference. In the room temperature study, discrepancies between ADCs from DP-TSE and the reference were within 4%, but could be as high as 8% for DW-ssEPI after the noise correction. Excellent ADC reproducibility with a coefficient of variation < 5% was observed among the 10 measurements of DP-TSE, indicating desirable robustness for ADC-based tumor response assessment. In vivo TRE in DP-TSE was less than 1.6 mm overall, whereas it could be greater than 12 mm in DW-ssEPI. For GBM patients, the CSF and brain tissue ADCs from DP-TSE were within the ranges found in literature. ADC differences between the two techniques were within 8% among the six sarcoma patients. For the reference tube that had a relatively low diffusivity, the two diffusion sequences provided matched measurements. Conclusion: A diffusion technique with excellent geometric fidelity, accurate, and reproducible ADC measurement was demonstrated for longitudinal tumor response assessment using a low-field MRI-guided radiotherapy system. (C) 2017 American Association of Physicists in Medicine

Geometric Distortion Characterization and Correction for the 1.0 T Australian MRI-linac System Using an Inverse Electromagnetic Method

Postoperative Radiotherapy For Glioma: Improved Delineation Of The Clinical Target Volume Using The Geodesic Distance Calculation

A Novel Passive Shimming Method for the Correction of Magnetic Fields above the Patient Bed in MRI.

Fast geometric distortion correction using a deep neural network: Implementation for the 1 Tesla MRI‐Linac system

A modular phantom and software to characterize 3D geometric distortion in MRI

Clinical assessment of geometric distortion for a 0.35T MR-guided radiotherapy system

3D Isotropic Resolution Diffusion-Prepared Magnitude-Stabilized Bssfp Imaging with High Geometric Fidelity at 1.5 Tesla

Characterization of real-time cine MR imaging distortion on 0.35 T MRgRT with concentric Cine imaging QA phantom

Accuracy of device-specific 2D and 3D image distortion correction algorithms for magnetic resonance imaging of the head provided by a manufacturer

Distortion-Free Diffusion MRI using an MRI-Guided Tri-Cobalt 60 Radiotherapy System: Sequence Verification and Preliminary Clinical Experience.

Comparison and evaluation of distortion correction techniques on an MR‐guided radiotherapy system

Open-source hardware and software for the measurement, characterization, reporting, and correction of geometric distortion in MRI

MO‐D‐I‐609‐01: Improved Target Localization in Low Field MR Using Local Weighted Mean(LWM) for Spatial Distortion Correction

Improving the clinical workflow of a MR-Linac by dosimetric evaluation of synthetic CT

ReUINet: A fast GNL distortion correction approach on a 1.0 T MRI‐Linac scanner

SU-C-17A-04: Distortion Characterization and Correction of MR-SIM Images.

Geometric distortion caused by metallic femoral head prosthesis in prostate cancer imaging on an MR linac: in-vivo measurements of spatial deformation

Investigation of a 3D system distortion correction method for MR images

Dosimetric impact of geometric distortions in an MRI-only proton therapy workflow for lung, liver and pancreas

Influence of different factors on registration error in a 1.5 T MR-guided linac

Evaluating stereotactic accuracy with patient‐specific MRI distortion corrections for frame‐based radiosurgery