Abstract:Polyphenylene sulfide (PPS) is widely used in auto components, machinery parts, electrical accessories, and anti-corrosion coatings, but its hydrophobicity restricts its application in biomaterials, medical equipment, battery separators, and oil pollution separation membranes. To improve the hydrophilicity of PPS, zirconium oxynitrate reacted with 3,5-dichlorosalicylic acid (SA) to generate zirconium-carboxylate (ZrSA). ZrSA was then incorporated into the main chain of PPS through copolymerization to yield hydrophilic copolymers (ZrSA-PPS). Meanwhile, SA was copolymerized into the main chain of the PPS to produce SA-PPS. Next, SA-PPS and ZrO 2 were physically blended to obtain hydrophilic composites (ZrO 2 /SA-PPS). The melting point of ZrSA-PPS ranged from 278.19 to 281.16 °C, which was slightly higher than that of ZrO 2 /SA-PPS (278.39–279.95 °C), but its crystallinity (34.3–41.2 %) was lower than that of ZrO 2 /SA-PPS (42.2–51.6 %). The maximum decomposition temperatures of ZrSA-PPS and ZrO 2 /SA-PPS were increased by about 10 °C, indicating that the Zr–O bonds obstruct the thermally induced movements of the molecular chain. The ZrSA-PPS possessed a tensile strength of 40.8–70.5 MPa and a flexural strength of 46.4–103.4 MPa. The tensile and flexural strengths of ZrO 2 /SA-PPS (14.6–65.1 Mpa and 23.1–100.3 Mpa) were significantly inferior to that of ZrSA-PPS. This revealed that the ZrSA cross-linked structure can prevent crack propagation. The water contact angle of ZrSA-PPS and ZrO 2 /SA-PPS were ranged from 59.0° to 76.5° and 61.6°–78.5° (Neat-PPS, ∼87.9°), respectively. The agglomeration of ZrO 2 resulted in a slightly higher water contact angle for ZrO 2 /SA-PPS than for ZrSA-PPS. The enhanced hydrophilicity of ZrSA-PPS benefited from the formation of large chain spacing, strong polar groups, and hydrogen bonds. Our study may shed light on the hydrophilic modification of PPS, which should offer a valuable guide and option for PPS in hydrophilic applications.

Hydrophilicity modification of polyphenylene sulfide: A comparative study on the introduction of Zr by physical blending and copolymerization

Breaking the hydrophilic limitation of polyphenylene sulfide through the introduction of bulky polar monomers

Synthesis, characterization and lubricating effect of long chain branched polydimethylsiloxane-g-polyethylene copolymers

Hydrophilic modification of a PSU membrane with block copolymer of PS-b-SBMA

Combined effect of interfacial modification and α-ZrP reinforcement on the tribological properties of PPS fabric/phenolic composites

Cytocompatibility of new-type sulfonated polymer surfaces

Hydrophilicity and flux properties improvement of high performance polysulfone membranes via sulfonation and blending with Poly(lactic acid)

Thermal properties and hydrophilicity of antibacterial poly(phenylene sulfide) nanocomposites reinforced with zinc oxide-doped multiwall carbon nanotubes

Improving carbon fibre reinforced polyphenylene sulfide using amine and phenolic interphase modifications

An Extending of Candidate for the Hydrophilic Modification of Polysulfone Membranes from the Compatibility Consideration: the Polyethersulfone-Based Amphiphilic Copolymer As an Example

Steric Hindrance and Orientation Polarization by a Zwitterionic Additive to Stabilize Zinc Metal Anodes

Polypropylene Glycol: the Hydrophilic Phenomena in the Modification of Polyethersulfone Membranes

Surface modification of zinc oxide and its application in polypropylene with excellent fire performance and ultra-violet resistance

Improving the hydrophilicity and fouling-resistance of polysulfone ultrafiltration membranes via surface zwitterionicalization mediated by polysulfone-based triblock copolymer additive

Investigating the Impact of the Sulfonation Degree in Sulfonated Polyphenylsulfone (sPPSU) on PES/sPPSU Polymer Blend Membranes

Preparation and anti-biological adhesion performance evaluation of ZNO@PSBMA super hydrophilic coating

Functional Zwitterionic Polyurethanes: State‐of‐the‐Art Review

Bifunctional Acid Proton Conductor Doping to Improve the Comprehensive Properties of a Cross-Linked Polybenzimidazole High-Temperature Proton Exchange Membrane

Preparation and Enhanced Dielectric-hydrophobic Properties of PDMS-PVDF Composite Films with Au@PS Nanoparticle

Stable Superhydrophobic Porous Coatings from Hybrid ABC Triblock Copolymers and Their Anticorrosive Performance

Enhancement of interfacial properties of carbon fiber reinforced polyphenylene sulfide resin by sulfur treatment