Abstract:High Performance Polymers, Ahead of Print. To achieve increased flow and reduce fouling, polymeric membranes can be functionalized with hydrophilic groups such as sulfone, amines, and others. This research has aimed at the sulfonation of Polysulfone (PSU) with various agents and at varying substitution degrees to change its hydrophobic character. PSU was also blended with Poly(lactic acid) (PLA), which is a more hydrophilic polymer. The phase inversion method was used to make PSU, PLA, sulfonated PSU, and PSU/PLA blend-based membranes. Sulfonation degrees of sulfonated PSU membranes were assessed using FT-IR, mechanical characteristics of membranes were determined, and thermal properties of membranes were clarified using DSC and TGA techniques. Hydrophilic natures and membrane alterations were investigated, as well as contact angle and water uptake measures. Among three distinct sulfonation agents (trimethylsilyl chlorosulfonate (TMSCS), sulfuric acid, and chlorosulfonic acid) employed to produce a 20% sulfonation degree of polysulfone, TMSCS was chosen as having the highest sulfonation efficiency (91.5%). With increasing sulfonation degree, a drop in molecular weight was seen in all sulfonated polysulfone samples. The mechanical strength values of polysulfone after sulfonation with TMSCS rose from 35.23 MPa to 63.35 MPa, while the contact angle value decreased from 85.58° to 71°. The contact angle value reduced from 85.58° to 64.68° while the mechanical strength of the PSU and PSU/PLA (50:50) blend increased from 35.23 MPa to 39.3 MPa. Membranes were also tested for pure water flux, hydrostability, and biostability. In terms of application requirements, it was determined that sulfonated PSU-based membranes manufactured with TMSCS with a 20% sulfonation degree and PSU/PLA blend-based membranes with a 50:50 (w:w) ratio have the optimum compositions with high flux quantities.

Hydrophilic modification of a PSU membrane with block copolymer of PS-b-SBMA

Zwitterionic Polymers As High-Performance Coatings for Hemoperfusion Adsorbents and Their Chemisorption of Protein-Bound Toxins Through Computational Simulations

Improving the hydrophilicity and fouling-resistance of polysulfone ultrafiltration membranes via surface zwitterionicalization mediated by polysulfone-based triblock copolymer additive

Improving Hydrophilicity And Protein Resistance Of Poly(Vinylidene Fluoride) Membranes By Blending With Amphiphilic Hyperbranched-Star Polymer

Novel polysulfone hybrid ultrafiltration membrane prepared with TiO2-g-HEMA and its antifouling characteristics

Fabrication and Study of Dextran/Sulfonated Polysulfone Blend Membranes for Low-Density Lipoprotein Adsorption

Hydrophilicity and flux properties improvement of high performance polysulfone membranes via sulfonation and blending with Poly(lactic acid)

PSU-g-SBMA Hollow Fiber Membrane for Treatment of Oily Wastewater.

An Extending of Candidate for the Hydrophilic Modification of Polysulfone Membranes from the Compatibility Consideration: the Polyethersulfone-Based Amphiphilic Copolymer As an Example

Chemical modification of polysulfone membrane by polyethylene glycol for resisting drug adsorption and self-assembly of hepatocytes

Synthesis and Structure of Hydrophobically Modified Polysulfobetaine Methacrylate

Fabrication of Antifouling Membrane Surface by Poly(Sulfobetaine Methacrylate)/Polydopamine Co-Deposition

Anionic glycosylated polysulfone membranes for the affinity adsorption of low-density lipoprotein via click reactions

Immobilization of Sodium Alginate Sulfates on Polysulfone Ultrafiltration Membranes for Selective Adsorption of Low-Density Lipoprotein

Achieving highly effective non-biofouling performance for polypropylene membranes modified by UV-induced surface graft polymerization of two oppositely charged monomers.

Novel antifouling polysulfone matrix membrane modified with zwitterionic polymer

Improved Protein-Adsorption Resistance of Polyethersulfone Membranes Via Surface Segregation of Ultrahigh Molecular Weight Poly(styrene-Alt-maleic Anhydride)

A Facile Method for Polyamide Membrane Modification by Poly(sulfobetaine Methacrylate) to Improve Fouling Resistance

Improving Hemocompatibility of Polysulfone Membrane by UV-Assisted Grafting of Sulfonated Chitosan

A Poly(sulfobetaine) Hollow Fiber Ultrafiltration Membrane for the Treatment of Oily Wastewater

Amphiphilic ABA copolymers used for surface modification of polysulfone membranes, Part 1: Molecular design, synthesis, and characterization