Abstract:Herein, a new and facile approach by in situ cross-linking polymerizationcoupled with a post-functionalization procedure was developed to prepare functional PES composite membranes to improve its over-all performance as hemodialysis membrane. In our strategy, poly(acrylate acid-co-2-hydroxyethyl methacrylate) P(AA-co-HEMA) as a macromonomer, was firstly synthesized by free radical copolymerization, then blended in PES solution and in situ cross-linked polymerization via the reaction of the hydroxy group of HEMA and the isocyanate group of 4,4′-diphenylmethane diisocyanate (MDI) to prepare the carboxylic membranes. To further enhance the hemocompatibility, the carboxylic membranes were post-functionalized by grafting sulfonic acid groups onto the membrane surfaces via a “grafting from” method. The chemical compositions and surface morphologies of the prepared membranes were investigated by ATR-FTIR, XPS, SEM and AFM. After introducing the functional groups, the surface hydrophilicity of the membranes was significantly improved, demonstrated by the reduced water contact angles (WCAs) and enhanced permeability. The decreased protein adsorptions and higher flux recovery ratios (FRRs) revealed that the modified membranes showed improved protein antifouling property. The improvement of hemocompatibility was confirmed by the inhibited platelet adhesion, prolonged clotting times, and suppressed blood-related complement activation. Moreover, the post-functionalized membranes also showed good cytocompatibility. In general, the in situ cross-linking technique is a suitable route in the field of membrane modification for its facile and easy operation; and the post-functionalization operation could endow the membranes with efficiently improved properties.

An Extending of Candidate for the Hydrophilic Modification of Polysulfone Membranes from the Compatibility Consideration: the Polyethersulfone-Based Amphiphilic Copolymer As an Example

Fabrication of Hydrophilic and Sponge-Like PVDF/brush-like Copolymer Blend Membranes Using Triethylphosphate As Solvent

Improving Hydrophilicity And Protein Resistance Of Poly(Vinylidene Fluoride) Membranes By Blending With Amphiphilic Hyperbranched-Star Polymer

Polysulfone-based amphiphilic polymer for hydrophilicity and fouling-resistant modification of polyethersulfone membranes

A Readily Modified Polyethersulfone with Amino-Substituted Groups: Its Amphiphilic Copolymer Synthesis and Membrane Application

Improved Antifouling Property of Polyethersulfone Hollow Fiber Membranes Using Additive of Poly(Ethylene Glycol) Methyl Ether-B-Poly(Styrene) Copolymers

Amphiphilic Graft Copolymers Based on Ultrahigh Molecular Weight Poly(styrene-Alt-maleic Anhydride) with Poly(ethylene Glycol) Side Chains for Surface Modification of Polyethersulfone Membranes

Hydrophilic Modification of Polyethersulfone Porous Membranes Via A Thermal-Induced Surface Crosslinking Approach

Hydrophilic modification of a PSU membrane with block copolymer of PS-b-SBMA

Versatile Antifouling Polyethersulfone Filtration Membranes Modified Via Surface Grafting of Zwitterionic Polymers from a Reactive Amphiphilic Copolymer Additive.

Modification of a Polyethersulfone Membrane with a Block Copolymer Brush of Poly(2-Methacryloyloxyethyl Phosphorylcholine-Co-glycidyl Methacrylate) and a Branched Polypeptide Chain of Arg-Glu-Asp-Val

Hemocompatibility and ultrafiltration performance of surface-functionalized polyethersulfone membrane by blending comb-like amphiphilic block copolymer

Preparation and characterization of modified polyethersulfone hollow fiber membranes by blending poly (styrene-alt-maleic anhydride)

Enhanced membrane antifouling and separation performance by manipulating phase separation and surface segregation behaviors through incorporating versatile modifier

Enhancing the Antifouling and Antimicrobial Properties of Poly(ether sulfone) Membranes by Surface Quaternization from a Reactive Poly(ether sulfone) Based Copolymer Additive

Zwitterionic Hydrogel Thin Films As Antifouling Surface Layers of Polyethersulfone Ultrafiltration Membranes Anchored Via Reactive Copolymer Additive

Post-functionalization of Carboxylic Polyethersulfone Composite Membranes

Synthesis of Amphiphilic Comb-Shape Block Copolymers PSt-b-P(A-mPEG)and Studies on the Antifouling Property of Blend Modified Polyethersulfone Ultrafiltration Membranes

A simple method to prepare modified polyethersulfone membrane with improved hydrophilic surface by one-pot: The effect of hydrophobic segment length and molecular weight of copolymers

Electrolyte-responsive polyethersulfone membranes with zwitterionic polyethersulfone-based copolymers as additive

Improved Blood Compatibility of Polyethersulfone Membrane with A Hydrophilic and Anionic Surface