Abstract:This study presents a direct electrochemical modification technique for incorporating two specific small molecules, phenol, and aniline into carbon fibre (CF) surface. These molecules have a strong hydrogen bonding for polyphenylene sulphide (PPS) and are intended to improve the friction and wear properties of PPS/CF composites. The tribological properties of PPS/CF composites were evaluated using a pin-on-disc. To get a more thorough comprehension of the working conditions of PPS/CF composites, a comparative examination of the composites' tribological characteristics was carried out by modifying the nature of the opposing surface while keeping the sliding speed of the applied force consistent. The results showed that the addition of 10 mM phenol to carbon fibre results in a significant reduction in the coefficient of friction (COF) compared to carbon fibre treated with 50 mM phenol and 6 mM aniline when in contact with a steel counter-face. When sliding against a polymer counter-face, the composites experienced a reduction in the COF due to the formation of a transfer film rich in PPS. Introducing aniline groups to the fibre surface reduced the wear rate by 57.5% to 46% with applied forces of 25 N compared to PPS and unmodified PPS/CF when sliding against the polymer counter-face. This study thoroughly discusses the synergistic process of chemical modification on the tribological performance of PPS/CF. It also analyses the surface microstructures of the worn surfaces of the composites. This study has the potential to provide new insights into the design and development of CF/polymer composites with enhanced friction and wear properties.

Combined effect of interfacial modification and α-ZrP reinforcement on the tribological properties of PPS fabric/phenolic composites

Combined effects of interface modification and micro-filler reinforcements on the thermal and tribological performances of fabric composites

Synergistic effects of bioprotein decoration and WS2 @Ti3C2 nanohybrids on the interfacial and tribological performance of PPS/PTFE fabric composites

Enhanced high‐temperature tribological performance of PTFE / PI fabric composites by simultaneously introducing PDA / SiO 2 hybrid coating and aramid product reinforcements

Adopting bio-inspired interfacial modification and reinforcements simultaneously for optimizing the tribological performance of fabric composites

Significant Enhancement of Tribological Performance of Carbon Fabric/phenolic Composites Via Interfacial Modification and Use of a Lubricant Additive

Fabrication of Polyphenylene Sulfide Composites with Integrated Mechanical and Tribological Properties by Synchronically Adding Irradiation-Treated PTFE Powders and Short Carbon Fibers

Improving the Tribological Performance of Polyphenylene Sulfide by Incorporating Irradiation Treated Polytetrafluoroethylene Powders

Interfacial modification and tribological properties of ZnO nanosheet carbon fiber reinforced poly(hexahydrotriazine) composites

Inspired with fish scale to manufacture biomimetic MXene derivative for the reinforcement on tribological and mechanical properties of PPS fabric/phenolic composites

Combined effects of interface modification and nano-reinforcement via nano-enhanced interphase in hybrid-fabric composites for tribological applications

Enhanced Mechanical and Tribological Properties in Polyphenylene Sulfide/polytetrafluoroethylene Composites Reinforced by Short Carbon Fiber

Improving Interfacial Interactions of CF/PEEK Composites with Sulfonated Polyether Sulfone

Surface modification by air-plasma treatment and its effect on the tribological behavior of hybrid fabric-polyphenylene sulfide composites

Influence of Surface Modification on Tribo-Performance of Hybrid Glass/PTFE Fabric Composite with Phenolic Resin Binder

Study on the Friction and Sliding Wear Behavior of Hybrid Polytetrafluoroethylene/Kevlar Fabric Composites Filled with Polyphenylene Sulfide

Tribological behaviour of surface modified carbon-fibre-reinforced polyphenylene sulphide under dry condition

In Situ Micro-Fibrillization and Post Annealing to Significantly Improve the Tribological Properties of Polyphenylene Sulfide/polyamide 66/polytetrafluoroethylene Composites

A Biomimetic Approach to Improving Tribological Properties of Hybrid PTFE/Nomex Fabric/phenolic Composites

In Situ Microfibrillation of Polyamide 66 and Construction of Ordered Polytetrafluoroethylene Fibers to Significantly Reduce the Friction Coefficient of Polyphenylene Sulfide

Polydopamine/FeOOH-modified Interface in Carbon Cloth/polyimide Composites for Improved Mechanical/tribological Properties