Abstract:An in-depth understanding of the liquid metal flow and heat transfer is essential in order to identify the key mechanisms for the hearth erosion of a blast furnace. In this study, a comprehensive computational fluid dynamics model is described which predicts the flow and temperature distributions of liquid iron in blast furnace hearth, and the temperature distribution in the refractories. The new model addresses conjugate heat transfer, natural convection and turbulent flow through porous media, with its main features including improved transport equations (a modified k-epsilon turbulence model and thermal dispersion term) and a three-dimensional, high-resolution grid. The new turbulence model and terms take account of the effect of microscopic flows around coke particles and allow unified treatment of coke bed and coke-free layer. The predicted results show a well-organized flow pattern: two large-scale recirculation zones are separated vertically at the taphole level. This flow pattern controls the temperature distribution in the liquid phase, so that the temperature remains nearly uniform in the upper zone, but changes mainly across the lower zone. The effects of several factors were examined, such as cases comparing fluid buoyancy with constant fluid density as well as the shape and position of the coke free zone (i.e. based on reported dissection studies). Natural convection is found to be most important for the liquid metal flow patterns observed. Comparison with the plant data shows that the refractory pad temperature is under-predicted when assuming intact hearth lining. The pad temperature is very sensitive to the erosion of protection layer in the hearth lining.

Modelling of Inner Surface Temperature Field of Blast Furnace Wall Based on Inverse Heat Conduction Problems

Soft Sensor Modeling of Blast Furnace Wall Temperature Based on Temporal–Spatial Dimensional Finite-Element Extrapolation

Throat Temperature Estimation for Blast Furnace Based on Multi Layer Ore Coke Ratio Distribution Modelling

A Novel Method Based on Information Fusion for Modeling Burden Surface Temperature Field in Blast Furnace

Three-dimensional modelling of the wall heat transfer in the lower stack region of a blast furnace

Cfd Modelling Of Liquid Metal Flow And Heat Transfer In Blast Furnace Hearth

Heat transfer mechanism study of blast furnace cooling wall based on hot CFD simulation and model experiment

Temperature Field Analyses of Lining With Cooling Plates and Stave for Blast Furnace

2D Modelling and Simulation of Heat Transfer in Blast Furnace Hearth Using ANSYS

Heat transfer analysis of blast furnace stave

Numerical Simulation of Temperature Field and Analysis on Slag Skull of Blast Furnace Copper Stave

Three-Dimensional Modeling of Flow and Thermochemical Behavior in a Blast Furnace

Temperature Measurement Of Molten Iron In Taphole Of Blast Furnace Combined Temperature Drop Model With Heat Transfer Model

Study on Model for Rebuilding the Temperature and the Surface Heat Flux of the Billet Steel in an Industrial Furnace

Thermofluid-Solid Coupling Numerical Simulation Model of Blast Furnace Hearth Protection Measures.

Modelling of Blast Furnace: Importance of Cohesive Zone Treatment

Inverse Process Combined with Grey Prediction Model for Estimating the Inner Surface Geometry of Furnace Wall

Study of Heat Transfer Coefficient of Blast Furnace Stave

A Computational Study of the Blast Furnace Cooling Stave Based on the Analysis of Heat Transfer

Thermal Stress Analysis of Blast Furnace Hearth with Typical Erosion Based on Thermal Fluid-Solid Coupling

Analysis of the Relationship between Productivity and Hearth Wall Temperature of a Commercial Blast Furnace and Model Prediction