Abstract:An in-depth understanding of the liquid metal flow and heat transfer is essential in order to identify the key mechanisms for the hearth erosion of a blast furnace. In this study, a comprehensive computational fluid dynamics model is described which predicts the flow and temperature distributions of liquid iron in blast furnace hearth, and the temperature distribution in the refractories. The new model addresses conjugate heat transfer, natural convection and turbulent flow through porous media, with its main features including improved transport equations (a modified k-epsilon turbulence model and thermal dispersion term) and a three-dimensional, high-resolution grid. The new turbulence model and terms take account of the effect of microscopic flows around coke particles and allow unified treatment of coke bed and coke-free layer. The predicted results show a well-organized flow pattern: two large-scale recirculation zones are separated vertically at the taphole level. This flow pattern controls the temperature distribution in the liquid phase, so that the temperature remains nearly uniform in the upper zone, but changes mainly across the lower zone. The effects of several factors were examined, such as cases comparing fluid buoyancy with constant fluid density as well as the shape and position of the coke free zone (i.e. based on reported dissection studies). Natural convection is found to be most important for the liquid metal flow patterns observed. Comparison with the plant data shows that the refractory pad temperature is under-predicted when assuming intact hearth lining. The pad temperature is very sensitive to the erosion of protection layer in the hearth lining.

2D Modelling and Simulation of Heat Transfer in Blast Furnace Hearth Using ANSYS

CFD Modeling and Analysis of the Flow, Heat Transfer and Mass Transfer in a Blast Furnace Hearth

Cfd Modelling Of Liquid Metal Flow And Heat Transfer In Blast Furnace Hearth

Three-Dimensional Modeling of Flow and Thermochemical Behavior in a Blast Furnace

Modelling of Inner Surface Temperature Field of Blast Furnace Wall Based on Inverse Heat Conduction Problems

Computational Study of Blast Furnace Cooling Stave using Heat Transfer Analysis

A Computational Study of the Blast Furnace Cooling Stave Based on the Analysis of Heat Transfer

A 3D CFD Simulation of Liquid Flow in an Ironmaking Blast Furnace

Improved CFD Model to Predict Flow and Temperature Distributions in a Blast Furnace Hearth

Numerical simulation of solids flow in a blast furnace

Numerical Modeling of Multiphase Flow,heat Transfer and Titanium Flow Behavior in Blast Furnace Hearth

Numerical Simulation Model for Evaluating Protection Measures of Blast Furnace Hearth

Simulation of temperature field of sintering ignition furnace

Numerical Simulation of Temperature Field and Analysis on Slag Skull of Blast Furnace Copper Stave

Numerical Simulation of Heat Transfer Phenomenon in Steel Making Ladle

Modelling Ironmaking Blast Furnace: Solid Flow and Thermochemical Behaviours

Numerical Simulation of Temperature Field in Blast Furnace Gas Regenerative Furnace

Heat transfer analysis of blast furnace stave

Wear-Model-Based Analysis of the State of Blast Furnace Hearth

A Steady State Thermal and Material Balance Model for an Iron Making Blast Furnace and Its Validation with Operational Data

Process Simulation and Control Optimization of a Blast Furnace Using Classical Thermodynamics Combined to a Direct Search Algorithm