Abstract:Supercritical carbon dioxide (sCO 2 ) can be utilized as a working fluid in various thermal systems including large-scale power cycles; portable power production units, centralized coolant systems, and standalone cooling devices. However, the lack of accurate prediction tools such as heat transfer coefficient correlations and insufficient research studies about the mechanisms controlling heat transfer processes are hindering its practical realization for key energy and cooling systems. The overall objective of this study is to extend fundamental knowledge about heat transfer and fluid dynamic processes in conduits pertinent to sCO 2 with an emphasis on flow direction and inclination effects. This paper presents the study on effects of gravity, buoyancy on sCO 2 flow at temperatures near and away from the pseudo-critical temperature. The experimental setup consists of a high temperature and pressure sCO 2 heat transfer loop and flow testing facility. Recently, researched sCO 2 heat exchangers can have tubes oriented at different angles such as 45 deg or 90 deg to horizontal. For optimized design of efficient and cost-effective turbomachinery components utilizing sCO 2 as the heat transfer fluid, an understanding of convective heat transfer inside a tube/pipe is equally as important as external heat transfer. This paper presents an experimental and numerical study on sCO 2 heat transfer at various inclinations with angles ranging from 0 deg (horizontal) to 90 deg (vertical) along with upward and downward flow direction with different inlet temperatures. Thermocouple-based temperature measurement is utilized at multiple locations within the test section axially and circumferentially to study the temperature distributions on the tube surface. Computational fluid dynamics (CFD) simulations have been performed using ANSYS Fluent to complement experimental data. The CFD and experiment have been analyzed against the well-known Gnielinski Nusselt number correlation.

Modeling and Simulation of Heat Transfer Phenomena in an Annular Cooler of Iron Ore Sintering Process

Numerical Modeling of the Iron Ore Sintering Process

Review of computational fluid dynamics modeling of iron sintering process

Model Predictions of Important Bed and Gas Properties During Iron Ore Sintering

A Study of a Two-Phase Heat Transfer Mechanism in a Vertical Sintering Cooling Furnace

Numerical study and orthogonal analysis of optimal performance parameters for vertical cooling of sintered ore

Modelling the effect of sinter machine speed on bed temperature and coke combustion characteristics in iron ore sintering process

3D Transient Heat Transfer Simulation and Optimization for Initial Stage of Steel Continuous Casting Process

2D Modelling and Simulation of Heat Transfer in Blast Furnace Hearth Using ANSYS

Computational Study of Blast Furnace Cooling Stave using Heat Transfer Analysis

Numerical Simulation of Fluid Flow and Heat Transfer in a Ductile Iron Ladle During Holding and Teeming

Mathematical Modeling of Fluidized Bed Magnetizing Roasting of Iron Ore Fines

Simulation of the Internal Temperature Field and Flow Field in a Double-Layer Sintering Bed

A Computational Study of the Blast Furnace Cooling Stave Based on the Analysis of Heat Transfer

Data‐driven Modelling Methods in Sintering Process: Current Research Status and Perspectives

Numerical Simulation of Heat Transfer Phenomenon in Steel Making Ladle

Numerical investigation of heat transfer in the clinker cooling process of grate cooler

Numerical Simulation of Heat Transfer Behavior in Hot Spot Zone of Converter Molten Bath

A Computational Study on the Reduction Behavior of Iron Ore/Carbon Composite Pellets in Both Single and Multi-layer Bed Rotary Hearth Furnace

Experimental and Numerical Investigation of Effect of Inclination on sCO 2 Heat Transfer in a Circular Pipe

Simulation and application of dynamic heat transfer model for improvement of continuous casting process