Abstract:An in-depth understanding of the liquid metal flow and heat transfer is essential in order to identify the key mechanisms for the hearth erosion of a blast furnace. In this study, a comprehensive computational fluid dynamics model is described which predicts the flow and temperature distributions of liquid iron in blast furnace hearth, and the temperature distribution in the refractories. The new model addresses conjugate heat transfer, natural convection and turbulent flow through porous media, with its main features including improved transport equations (a modified k-epsilon turbulence model and thermal dispersion term) and a three-dimensional, high-resolution grid. The new turbulence model and terms take account of the effect of microscopic flows around coke particles and allow unified treatment of coke bed and coke-free layer. The predicted results show a well-organized flow pattern: two large-scale recirculation zones are separated vertically at the taphole level. This flow pattern controls the temperature distribution in the liquid phase, so that the temperature remains nearly uniform in the upper zone, but changes mainly across the lower zone. The effects of several factors were examined, such as cases comparing fluid buoyancy with constant fluid density as well as the shape and position of the coke free zone (i.e. based on reported dissection studies). Natural convection is found to be most important for the liquid metal flow patterns observed. Comparison with the plant data shows that the refractory pad temperature is under-predicted when assuming intact hearth lining. The pad temperature is very sensitive to the erosion of protection layer in the hearth lining.

A Computational Study of the Blast Furnace Cooling Stave Based on the Analysis of Heat Transfer

Computational Study of Blast Furnace Cooling Stave using Heat Transfer Analysis

Heat transfer analysis of blast furnace stave

Heat Transfer Analysis of Cooling Stave Based on Thermal State Experiment

Transient Heat Transfer Analysis of Blast Furnace Cooling Staves

The study of structure optimization of blast furnace cast steel cooling stave based on heat transfer analysis

The study of cooling channel optimization in blast furnace cast steel stave based on heat transfer analysis

2D Modelling and Simulation of Heat Transfer in Blast Furnace Hearth Using ANSYS

Realizing the Self-Protect Ability of a Blast Furnace Cooling System with Copper Stave

Numerical Simulation of Temperature Field and Analysis on Slag Skull of Blast Furnace Copper Stave

Temperature Field Analyses of Lining With Cooling Plates and Stave for Blast Furnace

Cfd Modelling Of Liquid Metal Flow And Heat Transfer In Blast Furnace Hearth

Modelling of Inner Surface Temperature Field of Blast Furnace Wall Based on Inverse Heat Conduction Problems

Heat Transfer Analysis for Staves with Cooling Water Pipes of Different Shape

Study of Heat Transfer Coefficient of Blast Furnace Stave

Structure Optimization of Blast Furnace Cast Steel Stave

Study on Unsteady Heat Transfer of Blast Furnace Cooling Stave

Study on the Equivalent Convection Coefficient of the Hot Surface of Blast Furnace Stave

Heat Transfer Optimization of Blast Furnace Stave Based on Entransy Dissipation and Entropy Generation Analysis

Comprehensive Numerical Modeling of Raceways in Blast Furnaces

Experimental and Operational Thermal Studies on Blast Furnace Cast Steel Staves