Abstract:Electro-slag refining process is widely employed in steel industry for the production of special alloys used in ocean, aeronautics, and nuclear industries. Because of the adverse effect on the ductility of metal, it is critical to remove oxygen in the process. This study established a transient three-dimensional (3D) coupled mathematical model for understanding oxygen transport behavior in the electro-slag refining process. The finite volume method was invoked to simultaneously solve mass, momentum, energy, and species conservation equations. Using the magnetic potential vector, Maxwell’s equations were solved, during which the obtained Joule heating and Lorentz force were coupled with the energy and momentum equations, respectively. The movement of metal–slag interface was described through the application of the volume of fluid (VOF) technique. Additionally, an auxiliary metallurgical kinetic module was introduced to determine the electrochemical reaction rate. An experiment was then conducted to validate the model, where the predicted oxygen contents agreed with the measured data within an acceptable accuracy range. Oxygen redistribution in both fluids is clarified: its transport rate at the metal droplet–slag interface is approximately one order of magnitude larger than that at the metal pool–slag interface. Further, the oxygen content in the metal pool is shown to increase with time, while the content in the slag layer is decreased. In order to effectively remove the oxygen in the metal, one more positive electrode, which is more likely to react with the oxygen, is proposed to be added in the unit.Graphical abstractDistributions of the electric streamlines and the phase distribution at 151.25 s with a current of 1800 A

Computational study of non-isothermal slag eye formation and its effects on ladle refining

Insight into the formation of slag eyes and the mechanism of slag entrapment in the steel-ladle refining process: Hydraulic modeling and numerical simulations

Fluid flow, slag entrainment, and composition evolution of slag inclusions during vacuum degassing refining

Analysis of Temperature Losses of the Liquid Steel in a Ladle Furnace During Desulfurization Stage

Numerical Simulation of Heat Transfer Phenomenon in Steel Making Ladle

Numerical Understanding on Refractory Flow-Induced Erosion and Reaction-Induced Corrosion Patterns in Ladle Refining Process

Impact of slag–refractory lining reactions on the formation of inclusions in steel

Numerical Investigations on the Slag Eye in Steel Ladles

A coupled mathematical model and experimental validation of oxygen transport behavior in the electro-slag refining process

Study on the slag-metal interfacial behavior under the impact of bubbles in different sizes

Optimize the Operation Parameters in Surging Auxiliary Slag Skimming Process Based on Large Eddy Simulation –Volume of Fluid –Discrete Phase Model Coupled Model

Metallurgical Mechanism Guided Machine Learning to Predict Slag Entrapment Behavior During Ladle Refining with Bottom Blowing

Modeling of Ladle Refining Process Considering Mixing and Chemical Reaction

Flow and Heat Transfer on the Surface of Molten Steel Slag Layer in Continuous Casting Mold

Modeling Framework for the Simulation of an Electric Smelting Furnace Considering Freeze Lining Formation

Dynamic mass variation and multiphase interaction among steel, slag, lining refractory and nonmetallic inclusions: Laboratory experiments and mathematical prediction

Numerical Investigation on Role of Bottom Gas Stirring in Controlling Thermal Stratification in Steel Ladles

Numerical simulation for heat transfer behavior of copper slag ladle under air-cooling mechanism

High-Temperature Rheometric and Melting Experiments of Refining-Type Ladle Slag Systems

Study on the structural properties of refining slags by molecular dynamics with deep learning potential