Abstract:In the steel industry, improving the hot charging and heat delivery ratio in the continuous casting of slabs and thick slabs can effectively reduce carbon emissions, lower energy consumption, and improve production efficiency. However, this puts very strict requirements on the surface quality of continuous-casting slab. Flame scarfing (or cleaning) technology is currently an important process in the metallurgy field, which can effectively remove impurities and crack defects on the surface and corners of continuous casting slab to ensure the quality and performance of the final product. Under the action of cleaning flame and iron oxide reaction heat, a cleaning molten pool is formed in the corner of the casting slab, and the shape and depth of the molten pool have an important influence on the cleaning effect. A three-dimensional mathematical model is developed to study the effect of slab cleaning speed and oxygen flow rate on the shape of the molten pool in the corners for the corner flame cleaning process. Simultaneously, a two-phase flow volume of fluid (VOF) model for gas-slag interactions is employed to examine the motion behavior of the molten slag. The results showed that when the operating conditions changed, the cleaning speed increased by 1 m/min, the length of the wide and narrow sides decreased by approximately 9.2 mm, and the depth of the corner pool decreased by approximately 5.3 mm. Moreover, a slag-blocking device was designed to mitigate the issue of slag splashing effectively based on the numerical simulation results compared with and without the slag-blocking device. These study works provide beneficial theoretical support and practical guidance for refining and optimizing flame-cleaning techniques.

Study on the slag-metal interfacial behavior under the impact of bubbles in different sizes

Investigation of circumferential distribution of slag deposited on slag screen of Shell coal gasifier

Insight into the formation of slag eyes and the mechanism of slag entrapment in the steel-ladle refining process: Hydraulic modeling and numerical simulations

Computational study of non-isothermal slag eye formation and its effects on ladle refining

Numerical study on the gas-liquid interface in the hydrogen reduction of copper slag process

Fluid flow, slag entrainment, and composition evolution of slag inclusions during vacuum degassing refining

Numerical investigation of bubble behavior and multiphase flow in ladle using purging plug with inclined slit designs

Optimize the Operation Parameters in Surging Auxiliary Slag Skimming Process Based on Large Eddy Simulation –Volume of Fluid –Discrete Phase Model Coupled Model

Flow and Heat Transfer on the Surface of Molten Steel Slag Layer in Continuous Casting Mold

Numerical investigation of sinusoidal pulsating gas intake to intensify the gas-slag momentum transfer in the top-blown smelting furnace

Numerical Investigations on the Slag Eye in Steel Ladles

Numerical Simulation of the Slag Granulation Process in Gas Quenching Under Multi-influencing Factors

Evaluating the Effect of MgO/Al2O3 Ratio on Thermal Behaviors and Structures of Blast Furnace Slag with Low Carbon Consumption

Numerical Simulation on the Motion Behavior of Micro-inclusions at the Steel–Slag Interface

Modeling the Residence Time of Metal Droplets in Slag During BOF Steelmaking

Bubble plume effects on the flotation kinetics of nonmetallic inclusions based on experimental observations

Micro insight into foaming behavior of CaO–SiO2–Fe O–MgO-based slag induced by slag/metal reaction

Numerical simulation for heat transfer behavior of copper slag ladle under air-cooling mechanism

Numerical Analysis of Slag–Steel–Air Four-Phase Flow in Steel Continuous Casting Model Using CFD-DBM-VOF Model

Effect of cleaning parameters on the molten pool shape and molten slag dynamics in the corner scarfing process of the casting slab

Numerical Simulation of the Interaction Between Supersonic Oxygen Jets and Molten Slag–Metal Bath in Steelmaking BOF Process