Numerical Simulation of the Slag Granulation Process in Gas Quenching Under Multi-influencing Factors

Xiaohong Liu,Zhi Wen,Yuhang Du,Sizong Zhang,Fuyong Su,Yongli Xiao,Guofeng Lou

DOI: https://doi.org/10.1007/s40997-023-00640-2

2023-05-12

Abstract:In the heat recovery technology of molten slag granulation, gas quenching is one of the most promising and crucial technologies for high-quality resource utilization. This study performed numerical investigations on the slag granulation process through the realizable k -epsilon model and volume of fluid methodology and gained deep insight into the breakup mechanism and influence of the gas Weber number (We) and liquid Reynolds number (Re). Results indicated that the shear action between gas and slag leads to the generation of the KH (Kelvin–Helmholtz) wave, which dominates the surface liquid film fragmentation. The pressure gradient between the gas and slag interfaces leads to the generation of RT (Rayleigh–Taylor) waves and, finally, to the liquid film fragmentation of spherical pores. The crushing effect of slag is mainly determined by the We, Re, and local momentum ratio between gas and slag ( R LM ). The variation of the dimensionless number has a significant effect on the fragmentation effect of the slag. When the We ranges from 621 to 932 and the Re from 336 to 605, an increase in the dimensionless number reduces the surface wavelength and the mean particle size of the slag. The surface wavelength decreases from about 12 to about 5 mm, and the mean particle size of the slag decreases from about 2.65 to 2.3 mm. The length and height of the break also decrease with increasing We and Re. Finally, an empirical formula for the size of the slag particle is obtained. According to the empirical formula, the particle size of the slag decreases with increasing airflow velocity and slag flow rate, and increases with increasing slag surface tension and viscosity.

engineering, mechanical