Abstract:This article presents a review of the research into gas stirring in ladle metallurgy carried out over the past few decades. Herein, the physical modeling experiments are divided into four major areas: (1) mixing and homogenization in the ladle; (2) gas bubble formation, transformation, and interactions in the plume zone; (3) inclusion behavior at the steel–slag interface and in the molten steel; and (4) open eye formation. Several industrial trials have also been carried out to optimize gas stirring and open eye formation. Approaches for selecting criteria for scaling to guarantee flow similarity between industrial trials and physical modeling experiments are discussed. To describe the bubble behavior and two-phase plume structure, four main mathematical models have been used in different research fields: (1) the quasi-single-phase model, (2) the volume of fluid (VOF) model, (3) the Eulerian multiphase (E–E) model, and (4) the Eulerian–Lagrangian (E–L) model. In recent years, the E–E model has been used to predict gas stirring conditions in the ladle, and specific models in commercial packages, as well as research codes, have been developed gradually to describe the complex physical and chemical phenomena. Furthermore, the coupling of turbulence models with multiphase models is also discussed. For physical modeling, some general empirical rules have not been analyzed sufficiently. Based on a comparison with the available experimental results, it is found that the mathematical models focusing on the mass transfer phenomenon and inclusion behaviors at the steel-slag interface, vacuum degassing at the gas–liquid interface, dissolution rate of the solid alloy at the liquid–solid interface, and the combination of fluid dynamics and thermodynamics need to be improved further. To describe industrial conditions using mathematical methods and improve numerical modeling, the results of physical modeling experiments and industrial trials must offer satisfactory validations for the improvement of numerical modeling.

Numerical investigation of bubble behavior and multiphase flow in ladle using purging plug with inclined slit designs

Experimental and Numerical Simulation on Sequential Three Phase Jet-Loop Reactor

Numerical Simulations Of Fluid Dynamics And Mixing In A Large Shallow Bubble Column: Effects Of The Sparging Pipe Allocations For Multiple-Pipe Gas Distributors

Numerical investigation of sinusoidal pulsating gas intake to intensify the gas-slag momentum transfer in the top-blown smelting furnace

Numerical Investigations on the Slag Eye in Steel Ladles

Multiphysics Numerical Simulation Model and Hydraulic Model Experiments in the Argon-Stirred Ladle

Experimental and Numerical Study on Flow Resistance and Bubble Transport in a Helical Static Mixer

Numerical Investigation on Transient Flow and Inclusion Removal Behavior in Tundish During Ladle Change Process

Numerical Investigation on Role of Bottom Gas Stirring in Controlling Thermal Stratification in Steel Ladles

Numerical simulation study of the effect of nonlinear side blowing on the flow of gas-liquid two-phase flow

Two-Way PBM–Euler Model for Gas and Liquid Flow in the Ladle

Study on the slag-metal interfacial behavior under the impact of bubbles in different sizes

Numerical Simulation of Transient Flow and Heat Transfer in a Steel Ladle During Holding Period

Numerical studies of melt pool and gas bubble dynamics in laser powder bed fusion process

Numerical Simulation of Multiphase Flow in Steel Continuous Casting Mold Using a Novel Euler–Euler–Lagrange Method

Numerical simulation of flow characteristics of side-bottom combined blowing in iron bath reactor

A Review of Physical and Numerical Approaches for the Study of Gas Stirring in Ladle Metallurgy

3D CFD Model of Ladle Heat Transfer With Gas Injection

Numerical Simulation on Gas-liquid Flow in Mechanical-Gas Injection Coupled Stirred System

Physical and Numerical Simulation Study on Structure Optimization of the Inner Wall of Submerged Entry Nozzle for Continuous Casting of Molten Steel