Abstract:A blast furnace operates under a countercurrent flow process, and a wide variety of physical and chemical reactions take place, especially in the hearth at the highest temperature. Therefore, the working status and erosion of the carbon brick have a critical influence on the longevity of the blast furnace. Although the phenomena in the hearth cannot be directly observed through the black box, hearth dissection provides an alternative way to access and subsequently evaluate the internal conditions. In this paper, a 4000 m3 blast furnace hearth was dissected, and 12 residual iron samples were collected and subjected to composition, morphology, and thermal conductivity analyses. The results show that in the center of the hearth, the residual iron had thicker metallic iron strips. This is because the residual iron in the center of the dissected hearth was fully mixed with carbon or coke, and this mixing apparently enhanced the heat conductivity in the center of the hearth to as great as 80.5 W/(m K). However, such a mixing state was gradually relieved in the regions either close to the wall or settling on the bottom. Thus, the residual iron near the wall formed a needle-like surface with a layer-by-layer structure in the form of alternatively thinner strip-shaped carbon and metallic iron, and the thermal conductivities of the residual iron near the wall were above 40.0 W/(m K) regardless of the relative height. Moreover, the erosion mechanisms of the blast furnace hearth wall are proposed, and the erosion thickness is accordingly evaluated based on the heat transfer model, in which the measured thermal conductivities of the residual iron are taken into consideration. According to the erosion mechanism, the thickness of residual iron is thinner, the erosion is more serious.

Analysis of the Relationship between Productivity and Hearth Wall Temperature of a Commercial Blast Furnace and Model Prediction

A Blast Furnace Throat Temperature Estimation Method Based on Multi-time Scale Online Fusion

Thermal Stress Analysis of Blast Furnace Hearth with Typical Erosion Based on Thermal Fluid-Solid Coupling

Throat Temperature Estimation for Blast Furnace Based on Multi Layer Ore Coke Ratio Distribution Modelling

Estimation of the Blast Furnace Hearth State Using an Inverse-Problem-Based Wear Model

Numerical Simulation of Blast Furnace Hearth Maintenance Measures

Improved CFD Model to Predict Flow and Temperature Distributions in a Blast Furnace Hearth

Numerical Investigation of the Limit of Coke Rate Reduction in an Ironmaking Blast Furnace (BF)

Cfd Modelling Of Liquid Metal Flow And Heat Transfer In Blast Furnace Hearth

Investigation of the Hearth Erosion of WISCO No. 1 Blast Furnace Based on the Numerical Analysis of Iron Flow and Heat Transfer in the Hearth

A Preliminary Model for Liquid Solidification in Blast Furnace Hearth

Numerical Investigation of the Inner Profiles of Ironmaking Blast Furnaces: Effect of Throat-to-Belly Diameter Ratio

Thermofluid-Solid Coupling Numerical Simulation Model of Blast Furnace Hearth Protection Measures.

Hot metal flow characteristics and its contribution to hearth erosion in the early stage of blast furnace campaign

Numerical Simulation Model for Evaluating Protection Measures of Blast Furnace Hearth

Computational Study of Hot Gas Injection (HGI) into an Ironmaking Blast Furnace (BF)

CFD Modeling and Analysis of the Flow, Heat Transfer and Mass Transfer in a Blast Furnace Hearth

Influence of the Residual Iron on the Erosion of Carbon Bricks in a 4000 m3 Blast Furnace Hearth: From the Measured Properties to the Proposed Mechanisms

Three-Dimensional Modeling of Flow and Thermochemical Behavior in a Blast Furnace

Numerical Analysis on Erosion and Optimization of a Blast Furnace Main Trough

Furnace heat prediction and control model and its application to large blast furnace