High-rate Synthesis of Ultra-Nanocrystalline Diamond in an Argon-Free Hot Filament Chemical Vapor Deposition Atmosphere for Tribological Films

Bin Shen,Qiang Lin,Sulin Chen,Zhe Ji,Zhewei Huang,Zhinan Zhang
DOI: https://doi.org/10.1016/j.surfcoat.2019.124999
2019-01-01
Abstract:In the present study, we demonstrate that the ultra-nanocrystalline diamond (UNCD), which has a mirror-like surface finish with a thickness-independent surface roughness of R-a similar to 5 nm and an average grain size as low as 2.7 nm, could be deposited at a growth rate up to 1.5 mu m/h in an argon-free hot filament chemical vapor deposition (HFCVD) condition. The growth mechanism is attributed to the high content of energetic carbon precursors, which is enabled by a low-pressure (600 Pa) and a high CH4:H-2 ratio (<= 1:10) environment, resulting in a substantially high renucleation rate. The hardness and Young's modulus of the deposited UNCD film are 28.8 GPa and 225 GPa respectively. In the ball-on-plate friction tests, the UNCD film exhibits a stable COF stabilizing at 0.063-0.076, which is 43%-55% lower than that for the MCD and NCD film. Besides, its wear rate is in the order of 10(-8) mm(3)N(-1)m(-1) with the counterbody of Si3N4 balls, comparable to that of the MCD and NCD film. We believe that the synthesis method presented in this study is a practical and economical approach for the deposition of UNCD films as a tribological film in a variety of applications.
What problem does this paper attempt to address?