Abstract:This paper reports a novel MEMS accelerometer whose effective stiffness can be adjusted flexibly and even tuned to almost zero by using the electrostatic softening effect of two parallel plate capacitors: the comb-finger capacitor and the triangular capacitor. When applied to a biased voltage, the comb-finger capacitor provides a relatively large and nonlinear negative stiffness in the gap-varying direction, while the triangular capacitor produces a small yet linear negative stiffness in the area-varying direction. The proposed accelerometer is fabricated by using a standard silicon-on-glass manufacturing process and controlled by a customized digital circuit. An analytical model based on the pull-in dynamics as a result of the stiffness tuning is developed and simulated to investigate the dynamic behavior of the nonlinear accelerometer system. The proportion integral differential controller is utilized to improve the performance of the accelerometer while maintaining the stability of the closed-loop system operating with extremely low effective stiffness. The experimental results indicate that a two-fold increase of the sensitivity, a 30% reduction of Allan deviation bias instability, and a 20% reduction of Allan velocity random walk are achieved for the open-loop accelerometer system. A 75% decrease of the standard deviation bias instability and nearly two orders of magnitude improvement of the noise floor at 1 Hz for the closed-loop accelerometer system are realized when the effective stiffness is reduced to almost zero.

Stiffness-Mass Decoupled Honeycomb-like Disk Resonator Gyroscope

0.015 Degree-Per-Hour Honeycomb Disk Resonator Gyroscope

A Bulk Micromachined Gyroscope With Improved Quality-Factors At Atmospheric Pressure

A MICROMECHANICAL MODE-MATCHED GYROSCOPE USING STIFFNESS NONLINEARITY AND ELECTROSTATIC TUNING

A Sub-0.1°/H Bias-Instability MEMS Gyroscope Using Resonant Constant-Frequency Driving Technique

A Stiffness-Tunable MEMS Accelerometer

A 0.09°/h Bias-Instability MEMS Gyroscope Working with a Fixed Resonance Frequency

Performance Characterization of a Bulk Micromachined Gyroscope Working at Atmosphere

Improving Long-Term Stability of a Resonant Micro-Optic Gyro by Reducing Polarization Fluctuation

Innovation of Flat Gyro: Center Support Quadruple Mass Gyroscope

Design, Fabrication and Characterization of Disk Resonator Gyroscope with Vibration and Shock Resistance

Performance Improvement of a Resonant Fiber Optic Gyroscope with a Hybrid Photonic Crystal Fiber Ring Resonator.

Design and optimization of a resonant output frequency gyroscope for robust sensitivity and bandwidth performance

A Novel Mechanical Frequency Tuning Method Based on Mass-Stiffness Decoupling for MEMS Gyroscopes

A Wafer-Level Vacuum Packaged MEMS Disk Resonator Gyroscope With 0.42°/h Bias Instability Within ±300°/s Full Scale

Broadband Source-Driven Resonant Micro-Optic Gyroscope Based on a Multi-Turn Waveguide-Type Ring Resonator

A highly double-decoupled self-oscillation gyroscope operating at atmospheric pressure

3 m × 3 m heterolithic passive resonant gyroscope with cavity length stabilization

Optimal Design Of A Center Support Quadruple Mass Gyroscope (Csqmg)

3 m$\times$3 m heterolithic passive resonant gyroscope with cavity length stabilization

Design of a Novel Gear-Like Disk Resonator Gyroscope with High Mechanical Sensitivity