Abstract:In this study, both the digital image correlation (DIC) and depth-sensing indentation (DSI) measurements were performed to investigate the non-uniform local mechanical behaviors of HR3C/T92 dissimilar welded joint during plastic deformation. The macro-scale DIC experiments showed the uneven distribution and transfer phenomena of the plastic deformation in the welded samples. The grain-scale DIC measurements further revealed that the strain localization was closely related to the local microstructures. To understand the correlation of the non-uniform deformation behavior with the local microstructure in the welded samples, the electron backscatter diffraction (EBSD) tests in the as-received state and ex-situ optical microscope (OM) observations during the tensile deformation process were conducted. The slip morphologies were found to be different across the welded joint, and the grain-scale strain localizations were proved to be closely related with the behaviors of the slip bands. Moreover, ex-situ DSI tests were also carried out to determine the local mechanical properties of the HR3C/T92 dissimilar welded joint during the tensile deformation process. The basic elasto-plastic properties (elastic modulus, yield strength, and hardening parameters) in particular zones of the welded joint were estimated by using the multi-fidelity deep neural network method combined with indentation characteristic parameters. The non-uniform deformation behavior of the HR3C/T92 welded joint during tensile loading was further simulated by using the finite element method based on the estimated elasto-plastic properties of the welded joint, and a general agreement between the simulated result and experimental tensile curve has been obtained.

Microstructure and Mechanical Properties of Simultaneously Explosively-Welded Steel/Cu Pipes and Al/Cu Pipe/rod

DIC/DSI Based Studies on the Local Mechanical Behaviors of HR3C/T92 Dissimilar Welded Joint During Plastic Deformation

Microstructure and texture distribution in the bonding interface of Cu/Al composite tube fabricated by explosive welding

Interfacial Microstructure and Shear Behavior of the Copper/Q235 Steel/Copper Block Fabricated by Explosive Welding

Investigation on microstructure and mechanical properties in explosive welded Mo–Cu/Cu interface

Investigation on the interfacial microstructure and mechanical properties of the W-Cu joints fabricated by hot explosive welding

Microstructure and mechanical properties investigation of explosively welded titanium/copper/steel trimetallic plate

Interface Microstructure and Mechanical Properties of Nickel/Steel Bimetal Composite Pipe Fabricated by Explosive Welding

Interface bonding and mechanical properties of large explosively welded titanium/aluminum composite pipes

Interface Microstructure and Numerical Simulation Investigations of Ni/TC18 Composite Tube Fabricated by Explosive Welding

Study on Microstructure and Properties of Welded Joint of L360QS/N08825 Bimetallic Composite Pipe

Microstructure and Mechanical Properties of Copper–steel Laminated and Sandwich Joints Prepared by Electron Beam Welding

Super Plasticity in a Cold-Welded Al-Cu Joint

Microstructure and Mechanical Properties of Resistance Heat-Assisted High-Power Ultrasonic Dissimilar Welded Cu/Al Joint

A novel dynamic self-constrained explosive welding method for manufacturing copper-steel bimetallic tube

Microstructure evolution and mechanical properties of Cu–Al joints by ultrasonic welding

Microstructure and Mechanical Properties of C10100 Copper/304 Stainless Steel Electron Beam Welded Joint

10.1063/1.5084134.2

Microstructure and Mechanical Properties of the Joint Fabricated Between Stainless Steel and Copper Using Gas Metal Arc Welding

Investigation of microstructure and mechanical properties in dissimilar-metal welding between ferritic stainless steel and Co-based superalloy using electron beam welding

Dynamic Weld evolution during ultrasonic welding of Cu–Al joints