Abstract:Ion-selective electrodes (ISE’s) have benefits for solution-phase detection and quantification of ions, such as ease of operation, low cost, and high throughput compared to, e.g., ion chromatography or mass spectrometry methods. ISE devices are traditionally operated under zero-current conditions, where analyte ions passively exchange across a selective membrane barrier, yielding a Nernstian response after equilibration of Coulombic and chemical driving forces across the membrane. However, this passive mode of operation can require long equilibration times and lead to drift, for example due to electrolyte leakage and pH impacting the membrane and reference electrode. In recent years, non-equilibrium detection techniques have been of growing interest, where the ISE signal is obtained under applied electrical signal. However, the majority of this work has been devoted to cation sensing, with relatively few studies examining anion ISEs under active electrical actuation. Agricultural expansion and the corresponding uptick in application of supplemental nitrogen to soil has led to an increased demand for technologies to measure anions like nitrate – both from a production and regulation standpoint. In this work, we employ galvanostatic polarization of solid-contact ISEs as a non-equilibrium nitrate detection method. Our investigation involves coating electrodes with a redox-active charged polymer to act as a transduction layer to convert ionic to electronic signal, followed by solvent casting of a polymeric ion-selective membrane. We examine the impact of repeated rapid charging and discharging ISE electrode stacks on measurement time and stability. We compare the metrics derived from this technique to conventional open-circuit measurements using the same device. We identify benefits for this mode of operation using established nitrate membrane materials (e.g. nitrate ionophore VI membrane cocktail) that address some of the typical limitations of these conventional materials and we discuss opportunities for further refinement.

An Integrated Measurement of Six Response Performance Indicators for Lead Ion-Selective Electrodes and Application.

Screening the polymeric membrane toxic metals ion‐selective electrodes with multiple high‐response performances using electrode quality index

An Active-Conductive Layer Stacked Sensor Platform for Real-Time Detection of Heavy Metal Ions

Novel All-State Heavy Metal Sensors and Analysis Instrument

8.2.2 A High Spatial Resolution MEA for Voltammetric Analysis of Trace Metals in Water Pollution Based on Partial Least Squares Regression

Experimental Research on Zn Ion Selective Electrode and Measurement of Minim Element

In Situ Determination of Cadmium and Lead in Water Environment Based on Microelectrode Array Combined PLS with Local Optimum Method

An All-Solid-State Silicate Ion-Selective Electrode Using PbSiO3 As a Sensitive Membrane

Characterization and Calibration of Sulphate ISE with Complex Membrane as Ionophore

Fabrication of Lead Ion Selective Electrodes (Pb-ISE) based on Poly Methyl-Methacrylate-Co-Butyl Acrylate (MB28) Thin Film Photo-polymers and Pencil Graphite Electrodes (PGEs)

A cathodically polarized PANI-based lead ion-selective electrode: achieving high stability with antibiofouling capabilities

Steady-State and Transient Performance of Ion-Sensitive Electrodes Suitable for Wearable and Implantable Electro-Chemical Sensing

Design of MEA-based electronic tongue for automatic environmental monitoring

Recent advances in solid-contact ion-selective electrodes: functional materials, transduction mechanisms, and development trends.

Hydrogen Bond-Based Macrocyclic And Tripodal Neutral Ionophores For Highly Selective Polymeric Membrane Sulfate-Selective Electrodes

Improved Microelectrode Array Electrode Design for Heavy Metal Detection

Nonequilibrium Anion Detection in Solid-Contact Ion-Selective Electrodes

Non-Equilibrium Nitrate Detection in Ionophore-Based Solid-Contact Ion-Selective Electrodes

Amperometric Response of Solid-Contact Ion-Selective Electrodes Utilizing a Two-Compartment Cell and a Redox Couple in Solution

Preparation of Electrochemical Sensor for Lead(ii) Based on Molecularly Imprinted Film

MXene-Coated Ion-Selective Electrode Sensors for Highly Stable and Selective Lithium Dynamics Monitoring