Abstract:A high ratio (winding ratio of 1:80) pulse transformer with a modular ferrite core was developed for a repetitive resonant charging system. The magnetic core is constructed from 68 small blocks of ferrites, glued together by epoxy resin. This allows a high degree of freedom in choosing core shape and size. Critical issues related to this modular design are the size tolerance of the individual ferrite blocks, the unavoidable air gap between the blocks, and the saturation of the core. To evaluate the swing of the flux density inside the core during the charging process, an equivalent circuit model was introduced. It was found that when a transformer is used in a resonant charging circuit, the minimal required volume of the magnetic material to keep the core unsaturated depends on the coupling coefficient of the transformer and is independent of the number of turns of the primary winding. Along the flux path, 17 small air gaps are present due to the inevitable joints between the ferrite blocks. The total air gap distance is about 0.67 mm. The primary and secondary windings have 16 turns and 1280 turns, respectively, and the actually obtained ratio is about 1:75.4. A coupling coefficient of 99.6% was obtained. Experimental results are in good agreement with the model, and the modular ferrite core works well. Using this transformer, the high-voltage capacitors can be charged up to more than 70 kV from a low-voltage capacitor with an initial charging voltage of about 965 V. With 26.9 J energy transfer, the increased flux density inside the core was about 0.23 T, and the core remains unsaturated. The energy transfer efficiency from the primary to the secondary was around 92%.

Precision Two-Stage Voltage Transformer for a Wide Voltage Range of 5–40 kV

The Development of Precision 500/√3-kV Two-Stage Voltage Transformer With High-Voltage Excitation

The Development of $110/\sqrt {3} \textrm {kv}$ Two-Stage Voltage Transformer with Accuracy Class 0.001

Voltage Ratio Traceability of 10 Kv Low-Voltage Excited Two-Stage Voltage Transformer

Research On Quantity Traceability For High Accuracy Two-Stage Voltage Transformer

A High-Voltage Pulse Transformer with a Modular Ferrite Core.

Design and Testing of a Medium Frequency Transformer

Design of Compact Transmission Line Transformer for High Voltage Nanosecond Pulses

Calibration of the Voltage Coefficient for High Accuracy 10 Kv Two-Stage Voltage Transformer with the Summation Method

Design of a High-Voltage-Insulation and High-Efficiency Medium Frequency Transformer

High-voltage High-Frequency Transformer Design for a 7.2kv to 120V/240V 20kva Solid State Transformer

Voltage Transformer and Study of Its Using

Development of Multi-Domain Design Tool for Medium Voltage High Frequency Power Transformers

Calibration System for High-Voltage Transformers With Multiharmonic Distorted Waveforms

Voltage Dependence Measurement of A 110 Kv Lve-Tsvt

Modeling and Design of a Medium Frequency Transformer with High Isolation and High Power-Density

Comparison of voltage transformer measuring systems at 110 kV and 10 kV

Analysis and Treatment of Electronic Voltage Transformers Exceeded Tolerance Problem

Modeling and Design of Insulation Structure for High Power Density Medium Voltage High-Frequency Transformers

Three-phase Voltage Source Converters Based on Series-Connected Power devices for Medium Voltage Variable Speed Drives.

Modeling and Simulation of Wide-Frequency Characteristics of Electromagnetic Standard Voltage Transformer