Tunable Microfluidic Device Fabricated by Femtosecond Structured Light for Particle and Cell Manipulation

Kai Hu,Liang Yang,Dongdong Jin,Jiawen Li,Shengyun Ji,Chen Xin,Yanlei Hu,Dong Wu,Li Zhang,Jiaru Chu

DOI: https://doi.org/10.1039/c9lc00759h

IF: 7.517

2019-01-01

Lab on a Chip

Abstract:A tunable microfluidic device for complete particle trapping was realized by integrating a pH-sensitive hydrogel microring array via femtosecond structured light.

What problem does this paper attempt to address?

In Situ Fabrication of a Tunable Microlens.

Lei Zhang,Zhiyuan Wang,Yichuan Wang,Rui Qiu,Wei Fang,Limin Tong

DOI: https://doi.org/10.1364/ol.40.003850

IF: 3.6

2015-01-01

Optics Letters

Abstract:We demonstrate an optofluidic variable-focus microlens formed by a solid polydimethylsiloxane (PDMS) meniscus channel wall and a tunable liquid lens body. A novel method for in situ fabrication of the meniscus channel wall is developed by introducing liquid PDMS prepolymer into a microchannel followed by curing. Three-light manipulation techniques including tunable optical focusing, collimating, and diverging are realized by varying the refractive index (RI) of liquid lens body. Also, we present an absorption measurement of methylene blue (MB) with a collimated probing light, achieving a detection limit of 0.25 mu M by using a 5-mm-long detection cell. (C) 2015 Optical Society of America
Design of Acoustofluidic Device for Localized Trapping

Li-qiang Li,Kun Jia,Er-yong Wu,Yong-jian Zhu,Ke-ji Yang

DOI: https://doi.org/10.1063/5.0006649

2020-01-01

Biomicrofluidics

Abstract:State of the art acoustofluidics typically treat micro-particles in a multi-wavelength range due to the scale limitations of the established ultrasound field. Here, we report a spatial selective acoustofluidic device that allows trapping micro-particles and cells in a wavelength scale. A pair of interdigital transducers with a concentric-arc shape is used to compress the beam width, while pulsed actuation is adopted to localize the acoustic radiation force in the wave propagating direction. Unlike the traditional usage of geometrical focus, the proposed device is designed by properly superposing the convergent section of two focused surface acoustic waves. We successfully demonstrate a single-column alignment of 15-μm polystyrene particles and double-column alignment of 8-μm T cells in a wavelength scale. Through proof-of-concept experiments, the proposed acoustofluidic device shows potential applications in on-chip biological and chemical analyses, where localized handing is required.
Microfabrication Assisted by Laser-Trapped Microparticle Tools

Jian Bai,Zen-rong Zhu-ge,Xiaona Wang,Xiyun Hou,Guoguang Yang

DOI: https://doi.org/10.1117/12.576129

2004-01-01

Abstract:A novel micro-fabrication technology using optical radiation pressure is presented. A simulation program has been written and simulation results have demonstrated that micro silica or diamond particles, trapped by focused laser beam, could be used as micro-fabrication tools for nanometer manufacturing. An experiment setup for laser trapping has been established and Silica particles, with diameter of 8 μm, has been successfully trapped in water and arbitrary-shaped diamond particles, whose size is about 3-8 μm, has been trapped and rotated as micro-fabrication tools. When trapped rigidity micro-particles tools was controlled by laser beam, the work stage was horizontally moved repeatedly so that a machining trace of 2nm on work piece has been attained.
Flexible fluidic lens with polymer membrane and multi-flow structure

Dan Liang,Dong Tai Liang,Xuan Yin Wang,Ping Li

DOI: https://doi.org/10.1016/j.optcom.2018.03.062

IF: 2.4

2018-01-01

Optics Communications

Abstract:This paper proposed a fluidic tunable lens with polymer membrane and multi-flow structure. The designed lens mainly consists of five optical layers including one polymer membrane, two solid layers and two liquid layers. A series of slime hexagonal holes are drilled in the solid layers and the lens holders, allowing the optical liquid flowing among the different layers. The integrated structure of the fluidic lens was presented, as well as the lens composition and fabrication process. The deformation process of the fluidic lens are measured and analyzed, and the optical property are simulated using Zemax software. Images captured through a prototype lens at various rotating angles presents almost identical patterns and the same image quality, showing good stability to gravity. The lens focal length can be adjusted flexibly from 32.3 mm to 14.3 mm under a tiny injection volume of 86.4 uL. Numerical analyses show that the lens distortion is less than 3% and relative illumination is above 0.72. The fluidic tunable lens shows the potential to be used in various compact, low cost and stable optical systems.
Tunable patterning of microscale particles using a surface acoustic wave device with slanted-finger interdigital transducers

Yan-cheng Wang,Cheng-yao Xu,De-qing Mei,Jia-wei Liu

DOI: https://doi.org/10.1631/jzus.A2000501

2021-01-01

Abstract:Polymer-based materials with patterned functional particles have been used to develop smart devices with multiple functionalities. This paper presents a novel method to pattern microscale particles into biocompatible polyethylene glycol diacrylate (PEGDA) fluid through a designed surface acoustic wave (SAW) device with slanted-finger interdigital transducers (SFITs). By applying signals of different frequencies, the SFITs can excite SAWs with various wavelengths to pattern the microscale particles. The structural design and working principle of the SAW device with SFITs are firstly presented. To investigate the generation of standing SAWs and pressure field distributions of the SAW device with SFITs, a numerical model was developed. Simulation results showed that different strip-shape patterned pressure fields can be generated, and the period and width of adjacent strips can be adjusted by changing the frequencies of the excitation signals. Experiments were performed to verify that the microscale particles in the PEGDA solution can be successfully patterned into strip-shape patterns with various positions, periods, and widths. The results obtained in this study demonstrate that the developed method of using an SAW device with SFITs can be used for tunable patterning of microscale particles in solutions, and shows great potential for biomedical and microfluidic applications.
Hybrid Femtosecond Laser Fabrication of a Size-Tunable Microtrap Chip with a High-Trapping Retention Rate

Bing Xu,Shengyun Ji,Deng Pan,Wenjin Hu,Suwan Zhu,Yanlei Hu,Jiawen Li,Dong Wu,Jiaru Chu,Koji Sugioka

DOI: https://doi.org/10.1364/ol.386095

IF: 3.6

2020-01-01

Optics Letters

Abstract:In this Letter, we propose a new (to the best of our knowledge), promising concept of a hybrid femtosecond (fs) laser processing method composed of single-point scanning and holographic light modulation fabrication for manufacturing a tunable-size microtrap chip. The hybrid method not only ensures key microfluidic device precision but also greatly improves the fabrication speed. By using a new asymmetry-bracket-shaped microtrap design with a mechanical strain stretching method, real-time size-tunable trapping is obtained, and a 100% particle trapping retention is realized, ignoring the flow fluctuation. Finally, the microtrap array is successfully applied to trap single yeast cells and hold them for $\sim{10}\;{\rm h}$∼10h without escaping.
Embellishment of Microfluidic Devices Via Femtosecond Laser Micronanofabrication for Chip Functionalization

Juan Wang,Yan He,Hong Xia,Li-Gang Niu,Ran Zhang,Qi-Dai Chen,Yong-Lai Zhang,Yan-Feng Li,Shao-Jiang Zeng,Jian-Hua Qin,Bing-Cheng Lin,Hong-Bo Sun

DOI: https://doi.org/10.1039/c003264f

IF: 7.517

2010-01-01

Lab on a Chip

Abstract:This paper demonstrates the embellishment of existing microfluidic devices with integrated three dimensional (3D) micronanostructures via femtosecond laser micronanofabrication, which, for the first time, proves two-photon photopolymerization (TPP) to be a powerful technology for chip functionalization. As representative examples, microsieves with various pore shape and adjustable pore size were successfully fabricated inside a conventional glass-based microfluidic channel prepared by wet etching for microparticle separation. Moreover, a fish scale like microfilter was also fabricated and appointed as a one-way valve, which showed excellent performance as we expected. These results indicate that such embellishment of microfluidic devices is simple, low cost, flexible and easy to access. We believe that, combined with TPP, the application of lab-on-chip devices would be further extended.
High Efficiency Fabrication of Complex Microtube Arrays by Scanning Focused Femtosecond Laser Bessel Beam for Trapping/Releasing Biological Cells

Liang Yang,Shengyun Ji,Kenan Xie,Wenqiang Du,Bingjie Liu,Yanlei Hu,Jiawen Li,Gang Zhao,Dong Wu,Wenhao Huang,Suling Liu,Hongyuan Jiang,Jiaru Chu

DOI: https://doi.org/10.1364/oe.25.008144

IF: 3.8

2017-01-01

Optics Express

Abstract:In this paper, we present a focused femtosecond laser Bessel beam scanning technique for the rapid fabrication of large-area 3D complex microtube arrays. The femtosecond laser beam is converted into several Bessel beams by two-dimensional phase modulation using a spatial light modulator. By scanning the focused Bessel beam along a designed route, microtubes with variable size and flexible geometry are rapidly fabricated by two-photon polymerization. The fabrication time is reduced by two orders of magnitude in comparison with conventional point-to-point scanning. Moreover, we construct an effective microoperating system for single cell manipulation using microtube arrays, and demonstrate its use in the capture, transfer, and release of embryonic fibroblast mouse cells as well as human breast cancer cells. The new fabrication strategy provides a novel method for the rapid fabrication of functional devices using a flexibly tailored laser beam.
Integration of Functional Microstructures Inside a Microfluidic Chip by Direct Femtosecond Laser Writing

Zhijiang Hu,Liang Yang,Bing Xu,Chenchu Zhang,Hongmei Zhong,Chen Xin,Kai Hu,Hao Wu,Yanlei Hu,Dong Wu

DOI: https://doi.org/10.1117/12.2506742

2019-01-01

Abstract:In the development of microfluidic systems, conventional 2D processing technologies are increasingly difficult to meet the requirement of integration of multifunctional components within a microchannel. Recently, two-photon polymerization (TPP) technology has emerged as a novel alternative to fabricate 3D microdevices functionalizing conventional microfluidic chips. Here, the development of TPP microfluidic technology comprising parallel fabrication, holographic patterning method and real-time lithography in a controlled flow is reported. And a series of functional microcomponents containing microfilters, microsorters, microtrap, tunable microlens are fabricated by above methods. The results indicate that the processing of microfluidic devices is simple, timesaving, low cost and programmable designability. The functional microchips are further used in blood cells sorting, biomedical sensing, microparticle purification and trapping with successful test results.
Liquid Microlens with Tunable Focal Length and Light Transmission

Gui-Rong Xiong,Yong-Hao Han,Cheng Sun,Li-Guo Sun,Guo-Zhi Han,Zhong-Ze Gu

DOI: https://doi.org/10.1063/1.2944265

IF: 4

2008-01-01

Applied Physics Letters

Abstract:A microfluidic design was created to allow liquid microlens to control focal length and light transmission. The focal length of the microlens was controlled by varying the volume of liquid infused into the liquid cell. The cell extruded a polydimethylsiloxane film and produced a changeable curvature. The imaging ability of the microlens was tuned by taking advantage of the phase transition of poly-N-isopropylacrylamide in the liquid. The phase transition temperature was controlled in the range of 25.6–34.5°C by changing the ion concentration.
An off-the-shelf microfluidic device for the controllable fabrication of multiple-holed hollow particles and their cell culture applications

Lili Sun,Tianbao Li,Baojin Zhang,Meng Zhang,Juan Xu,Jinyi Wang

DOI: https://doi.org/10.1039/d0qm01014f

IF: 8.6834

2021-01-01

Materials Chemistry Frontiers

Abstract:An off-the-shelf microfluidic device is developed for the controllable fabrication of multiple-holed hollow particles with exceptionally diverse structures and properties.

materials science, multidisciplinary,chemistry
Tunable Optofluidic Microbubble Lens.

Xuyang Zhao,Yuxing Chen,Zhihe Guo,Yi Zhou,Junhong Guo,Zhiran Liu,Xiangchao Zhang,Limin Xiao,Yiyan Fei,Xiang Wu

DOI: https://doi.org/10.1364/oe.453555

IF: 3.8

2022-01-01

Optics Express

Abstract:Optofluidic microlenses are one of the crucial components in many miniature lab-on-chip systems. However, many optofluidic microlenses are fabricated through complex micromachining and tuned by high-precision actuators. We propose a kind of tunable optofluidic microbubble lens that is made by the fuse-and-blow method with a fiber fusion splicer. The optical focusing properties of the microlens can be tuned by changing the refractive index of the liquid inside. The focal spot size is 2.8 µm and the focal length is 13.7 µm, which are better than those of other tunable optofluidic microlenses. The imaging capability of the optofluidic microbubble lens is demonstrated under a resolution test target and the imaging resolution can reach 1 µm. The results indicate that the optofluidic microbubble lens possesses good focusing properties and imaging capability for many applications, such as cell counting, optical trapping, spatial light coupling, beam shaping and imaging.
All‐Glass 3D Optofluidic Microchip with Built‐in Tunable Microlens Fabricated by Femtosecond Laser‐Assisted Etching

Yanlei Hu,Shenglong Rao,Sizhu Wu,Pengfei Wei,Weixin Qiu,Dong Wu,Bing Xu,Jincheng Ni,Liang Yang,Jiawen Li,Jiaru Chu,Koji Sugioka

DOI: https://doi.org/10.1002/adom.201701299

IF: 9

2018-01-01

Advanced Optical Materials

Abstract:Development of tunable microlenses by taking advantage of the physical adaptability of fluids is one of the challenges of optofluidic techniques, since it offers many applications in biochips, consumer electronics, and medical engineering. Current optofluidic tuning methods using electrowetting or pneumatic pressure typically suffer from high complexity involving external electromechanical actuating devices and limited tuning performance. In this paper, a novel and simple tuning method is proposed that changes the liquid refractive index in an optofluidic channel while leaving the shape of the microlens unchanged. To create an optofluidic microlens with high robustness and optical performance, built-in microlenses are fabricated inside 3D glass microfluidic channels by optimized single-operation wet etching assisted by a femtosecond laser. Tuning of focusing properties is demonstrated by filling the channel with media having different indices. Continuous tuning over a wide range (more than threefold tunability for both focal length and focal spot size) is also achieved by pumping sucrose solutions with different concentrations into the microchip channels. Reversible tuning is experimentally verified, indicating intriguing properties of the all-glass optofluidic microchip. Both the proposed tuning method and the all-glass architecture with built-in microlens offer great potential toward numerous applications, including microfluidic adaptive imaging and biomedical sensing.
Solvent-tunable PDMS microlens fabricated by femtosecond laser direct writing

dongxiao lu,yonglai zhang,dongdong han,huan wang,hong xia,qidai chen,hong ding,hongbo sun

DOI: https://doi.org/10.1039/c4tc02737j

IF: 6.4

2015-01-01

Journal of Materials Chemistry C

Abstract:Reported here is the fabrication of solvent-tunable polydimethylsiloxane (PDMS) microlenses using the femtosecond laser direct writing (FsLDW) technique. PDMS microlenses with equation-defined profiles, including both spherical microlens and aspheric hyperboloid microlens, have been fabricated according to preprogrammed models. In addition to excellent optical performance derived from the high accuracy and smooth surface, the resultant PDMS microlenses also show unique solvent-tunable properties; the focal length could be dynamically tuned by organic solvents of different solubility parameters. To obtain better control over the tunable property, a PDMS microlens has been flexibly integrated with a microfluidic device. Under the stimulation of different solvents, its tunable imaging performance has been demonstrated in a controlled manner.
Stimuli-Responsive Actuator Fabricated by Dynamic Asymmetric Femtosecond Bessel Beam for In Situ Particle and Cell Manipulation.

Rui Li,Dongdong Jin,Deng Pan,Shengyun Ji,Chen Xin,Guangli Liu,Shengying Fan,Hao Wu,Jiawen Li,Yanlei Hu,Dong Wu,Li Zhang,Jiaru Chu

DOI: https://doi.org/10.1021/acsnano.0c00381

IF: 17.1

2020-01-01

ACS Nano

Abstract:Micro-scale intelligent actuators capable of sensitive and accurate manipulation under external stimuli hold great promise in various fields including precision sensors and biomedical devices. Current microactuators, however, are often limited to multiple-step fabrication process and multi-materials. Here, a pH-triggered soft microactuator (<100 μm) with simple structure, one-step fabrication process and single material is proposed, which is composed of deformable hydrogel microstructures fabricated by an asymmetric femtosecond Bessel beam. To further explore the swelling-shrinking mechanism, the hydrogel porosity difference between expansion and contraction states is investigated. In addition, by introducing the dynamic holographic processing and splicing processing method, more complex responsive microstructures (S-shaped, C-shaped and tortile chiral structures) are rapidly fabricated, which exhibit tremendous expected deformation characteristics. Finally, as a proof of concept, a pH-responsive microgripper is fabricated for in situ capturing polystyrene (PS) particles and neural stem cells rapidly. This flexible, designable and one-step approach manufacturing of intelligent actuator provides a versatile platform for microobjects manipulation and drug delivery.
In-channel Integration of Designable Microoptical Devices Using Flat Scaffold-Supported Femtosecond-Laser Microfabrication for Coupling-Free Optofluidic Cell Counting

Dong Wu,Jian Xu,Li-Gang Niu,Si-Zhu Wu,Katsumi Midorikawa,Koji Sugioka

DOI: https://doi.org/10.1038/lsa.2015.1

2015-01-01

Abstract:The high-precision integration of three-dimensional (3D) microoptical components into microfluidics in a customizable manner is crucial for optical sensing, fluorescence analysis, and cell detection in optofluidic applications; however, it remains challenging for current microfabrication technologies. This paper reports the in-channel integration of flexible two-dimensional (2D) and 3D polymer microoptical devices into glass microfluidics by developing a novel technique: flat scaffold-supported hybrid femtosecond laser microfabrication (FSS-HFLM). The scaffold with an optimal thickness of 1–5 µm is fabricated on the lower internal surface of a microfluidic channel to improve the integration of high-precision microoptical devices on the scaffold by eliminating any undulated internal channel surface caused by wet etching. As a proof of demonstration, two types of typical microoptical devices, namely, 2D Fresnel zone plates (FZPs) and 3D refractive microlens arrays (MLAs), are integrated. These devices exhibit multicolor focal spots, elongated (>three times) focal length and imaging of the characters ‘RIKEN’ in a liquid channel. The resulting optofluidic chips are further used for coupling-free white-light cell counting with a success rate as high as 93%. An optofluidic system with two MLAs and a W-filter is also designed and fabricated for more advanced cell filtering/counting applications. By fabricating microscale polymer lenses in hollow glass microchannels, scientists realize an optofluidic chip that detects and counts cells. This scheme works by employing a femtosecond laser to ‘grow’ by two-photon polymerization various three-dimensional optical structures, such as microlens arrays, on a flat polymer scaffold on the internal surface of a microfluidic channel. White light is then shone through the lenses and the presence of cells in the optical path is detected by a drop in light transmission. Dong Wu and co-workers from RIKEN’s Laser Technology Laboratory in Japan and Jilin University in China say that this fabrication approach could also prove useful for constructing a variety of active and passive micro-optic devices, such as optical switches, on-chip microlasers and amplifiers for lab-on-a-chip applications.
Fabrication method and performance of a light-responsive hydrogel microvalve in a microfluidic chip

Jingwen Pan,Kehan Chen,Wenqiang Zhang,Lin Feng,Deyuan Zhang

DOI: https://doi.org/10.20517/ss.2022.03

2022-05-24

Soft Science

Abstract:Microfluidic technology has potential advantages in the complex manipulation of microfluidics on small-sized chips. However, it is difficult to integrate microvalves with complex flow channel structures, and this has limited the miniaturization of microfluidic systems and their portable applications. Light-responsive hydrogel (LRH) materials can rapidly change their volume under laser irradiation and can be used to prepare flexible microvalves to realize the integrated control of microfluidics. A simple fabrication method for an LRH microvalve on a microfluidic chip is proposed. The microspheres, as control elements of the microvalve based on an LRH modified with Laponite RD nanoclay and ferriferous oxide (Fe3O4) nanoparticles, are prepared through a T-shaped flow channel. The microvalve is assembled on the microfluidic chip with a normally closed circulation channel. The open/close performance of the microvalve is represented by the color change of the photonic crystal material. The results show that the LRH microspheres shrink and the flow channel opens after laser irradiation for 2 s. After stopping the laser at 18 s, the valve core swells and the flow channel closes.
Micro-patternable Nanoporous Polymer Integrated with Microstructures for Molecular Filtration.

Chia-Jung Chang,Chung-Shi Yang,Yun-Ju Chuang,Hwa-Seng Khoo,Fan-Gang Tseng

DOI: https://doi.org/10.1088/0957-4484/19/36/365301

IF: 3.5

2008-01-01

Nanotechnology

Abstract:This paper proposes a facile method to fabricate nanoporous microstructures by a photo-patternable SU-8 photoresist, to serve as a molecular filter in microfluidic systems. The fabrication process involves solvent-controlled nanoporous structure formation combined with standard photolithography steps for microstructure fabrication. The self-formed nanoporous morphology embedded inside the microstructure exhibits a sufficient mechanical strength and eliminates complex processes or protocols for integration/assembly of nano- and microstructures. Field emission gun scanning electronic microscopy (FEGSEM) images showed the fabricated nanoporous morphologies with embedded nanogaps of about 6-10 nm. Atomic force microscopy (AFM) images also depicted a clear difference on the degree of porosity between the solvent-controlled SU-8 and the standard resist. Fluorescent dyes, namely Rhodamine-B and Rhodamine-6G, were employed to estimate the diffusivity of the fabricated SU-8 based nanofilter and demonstrated that the Rhodamine based fluorescent molecules can penetrate these nanosized filtration structures. The fabricated nanofilter was capable of providing a molecular weight cut-off range up to 70 kDa, estimated roughly for a molecule with a diameter of 6-10 nm. This simple process provides a novel way to integrate the nanofiltration capability into microstructures while maintaining a sufficient mechanical strength for molecular level filtration in lab-on-chip (LOC) systems.
Design and Fabrication of a Tunable Optofluidic Microlens Driven by an Encircled Thermo-Pneumatic Actuator

Wei Zhang,Heng Li,Yongchao Zou,Pengpeng Zhao,Zeren Li

DOI: https://doi.org/10.3390/mi13081189

IF: 3.4

2022-07-29

Micromachines

Abstract:This paper presents the design, simulation, fabrication, assembly, and testing of a miniature thermo-pneumatic optofluidic lens. The device comprises two separate zones for air heating and fluid pressing on a flexible membrane. A buried three-dimensional spiral microchannel connects the two zones without pumps or valves. The three-dimensional microfluidic structure is realized using a high-resolution three-dimensional printing technique. Multi-physics finite element simulations are introduced to assess the optimized air chamber design and the low-temperature gradient of the optical liquid. The tunable lens can be operated using a direct-current power supply. The temperature change with time is measured using an infrared thermal imager. The focal length ranges from 5 to 23 mm under a maximum voltage of 6 V. Because of the small size and robust actuation scheme, the device can potentially be integrated into miniature micro-optics devices for the fine-tuning of focal lengths.

chemistry, analytical,nanoscience & nanotechnology,instruments & instrumentation,physics, applied
Light-Directed Liquid Manipulation in Flexible Bilayer Microtubes

Bo Xu,Chongyu Zhu,Lang Qin,Jia Wei,Yanlei Yu

DOI: https://doi.org/10.1002/smll.201901847

IF: 13.3

2019-01-01

Small

Abstract:Flexible microfluidic systems have potential in wearable and implantable medical applications. Directional liquid transportation in these systems typically requires mechanical pumps, gas tanks, and magnetic actuators. Herein, an alternative strategy is presented for light-directed liquid manipulation in flexible bilayer microtubes, which are composed of a commercially available supporting layer and the photodeformable layer of a newly designed azobenzene-containing linear liquid crystal copolymer. Upon moderate visible light irradiation, various liquid slugs confined in the flexible microtubes are driven in the preset direction over a long distance due to photodeformation-induced asymmetric capillary forces. Several light-driven prototypes of parallel array, closed-loop channel, and multiple micropump are established by the flexible bilayer microtubes to achieve liquid manipulation. Furthermore, an example of a wearable device attached to a finger for light-directed liquid motion is demonstrated in different gestures. These unique photocontrollable flexible microtubes offer a novel concept of wearable microfluidics.

Tunable Microfluidic Device Fabricated by Femtosecond Structured Light for Particle and Cell Manipulation

In Situ Fabrication of a Tunable Microlens.

Design of Acoustofluidic Device for Localized Trapping

Microfabrication Assisted by Laser-Trapped Microparticle Tools

Flexible fluidic lens with polymer membrane and multi-flow structure

Tunable patterning of microscale particles using a surface acoustic wave device with slanted-finger interdigital transducers

Hybrid Femtosecond Laser Fabrication of a Size-Tunable Microtrap Chip with a High-Trapping Retention Rate

Embellishment of Microfluidic Devices Via Femtosecond Laser Micronanofabrication for Chip Functionalization

High Efficiency Fabrication of Complex Microtube Arrays by Scanning Focused Femtosecond Laser Bessel Beam for Trapping/Releasing Biological Cells

Integration of Functional Microstructures Inside a Microfluidic Chip by Direct Femtosecond Laser Writing

Liquid Microlens with Tunable Focal Length and Light Transmission

An off-the-shelf microfluidic device for the controllable fabrication of multiple-holed hollow particles and their cell culture applications

Tunable Optofluidic Microbubble Lens.

All‐Glass 3D Optofluidic Microchip with Built‐in Tunable Microlens Fabricated by Femtosecond Laser‐Assisted Etching

Solvent-tunable PDMS microlens fabricated by femtosecond laser direct writing

Stimuli-Responsive Actuator Fabricated by Dynamic Asymmetric Femtosecond Bessel Beam for In Situ Particle and Cell Manipulation.

In-channel Integration of Designable Microoptical Devices Using Flat Scaffold-Supported Femtosecond-Laser Microfabrication for Coupling-Free Optofluidic Cell Counting

Fabrication method and performance of a light-responsive hydrogel microvalve in a microfluidic chip

Micro-patternable Nanoporous Polymer Integrated with Microstructures for Molecular Filtration.

Design and Fabrication of a Tunable Optofluidic Microlens Driven by an Encircled Thermo-Pneumatic Actuator

Light-Directed Liquid Manipulation in Flexible Bilayer Microtubes