Abstract:We develop a hybrid optofluidic microcavity by placing a microsphere with a diameter ranging from 1 to 4 μm in liquid-filled plano-plano Fabry–Perot (FP) cavities, which can provide an extremely low effective mode volume down to 0.3–5.1 μm3 while maintaining a high Q-factor up to 1×104–5×104 and a finesse of ∼2000. Compared to the pure plano-plano FP cavities that are known to suffer from the lack of mode confinement, diffraction, and geometrical walk-off losses as well as being highly susceptible to mirror misalignment, our microsphere-integrated FP (MIFP) cavities show strong optical confinement in the lateral direction with a tight mode radius of only 0.4–0.9 μm and high tolerance to mirror misalignment as large as 2°. With the microsphere serving as a waveguide, the MIFP is advantageous over a fiber-sandwiched FP cavity due to the open-cavity design for analytes/liquids to interact strongly with the resonant mode, the ease of assembly, and the possibility to replace the microsphere. In this work, the main characteristics of the MIFP, including Q-factor, finesse, effective mode radius and volume, and their dependence on the surrounding medium’s refractive index, mirror spacing, microsphere position inside the FP cavity, and mirror misalignment, are systematically investigated using a finite-element method. Then, by inserting dye-doped polystyrene microspheres of various sizes into the FP cavity filled with water, we experimentally realize single-mode MIFP optofluidic lasers that have a lasing threshold as low as a few microjoules per square millimeter and a lasing spot radius of only ∼0.5 μm. Our results suggest that the MIFP cavities provide a promising technology platform for novel photonic devices and biological/chemical detection with ultra-small detection volumes.

Tunable Optofluidic Microbubble Lens.

In Situ Fabrication of a Tunable Microlens.

High-Q, Low-Mode-volume Microsphere-Integrated Fabry–Perot Cavity for Optofluidic Lasing Applications

Flexible fluidic lens with polymer membrane and multi-flow structure

Bioinspired solid–liquid mixed tunable lens with multilayered structure

An Optical Zoom System Based on Tunable Lens with Polymer Membrane and Multilayered Structure

Discretely Tunable Optofluidic Compound Microlenses.

All‐Glass 3D Optofluidic Microchip with Built‐in Tunable Microlens Fabricated by Femtosecond Laser‐Assisted Etching

A Bio-Inspired Optical System with a Polymer Membrane and Integrated Structure

Design and Fabrication of a Tunable Optofluidic Microlens Driven by an Encircled Thermo-Pneumatic Actuator

Optofluidic Tunable Lenses for In-Plane Light Manipulation

Liquid Microlens with Tunable Focal Length and Light Transmission

Tunable Microfluidic Optical Devices with an Integrated Microlens Array

Optofluidic Microlenses: All‐Glass 3D Optofluidic Microchip with Built‐in Tunable Microlens Fabricated by Femtosecond Laser‐Assisted Etching (advanced Optical Materials 9/2018)

A Liquid-Filled Tunable Double-Focus Microlens

Tunable Focusing Properties Using Optofluidic Fresnel Zone Plates.

Tunable Optofluidic Fresnel Lens with Ring-Shaped Electrodes

Novel Optofluidic Imaging System Integrated with Tunable Microlens Arrays

Ultra-thin, Zoom Capable, Flexible Metalenses with High Focusing Efficiency and Large Numerical Aperture

Optofluidic Tunable Manipulation of Microparticles by Integrating Graded-Index Fiber Taper with A Microcavity

Design and Fabrication Optofluidic Tunable Lens by 3D Printing