Abstract:This paper numerically and experimentally investigates and demonstrates the design of an optofluidic in-plane bi-concave lens to perform both light focusing and diverging using the combined effect of pressure driven flow and electro-osmosis. The concave lens is formed in a rectangular chamber with a liquid core-liquid cladding (L-2) configuration. Under constant flow rates, the performance of the lens can be controlled by an external electric field. The lens consists of a core stream (conducting fluid), cladding streams (non-conducing fluids), and auxiliary cladding streams (conducting fluids). In the focusing mode, the auxiliary cladding stream is introduced to sandwich the biconcave lens to prevent light rays from scattering at the rough chamber wall. In the diverging mode, the auxiliary cladding liquid has a new role as the low refractive-index cladding of the lens. In the experiments, the test devices were fabricated in polydimethylsiloxane (PDMS) using the standard soft lithography technique. Ethanol, cinnamaldehyde, and a mixture of 73.5% ethylene glycol and 26.5% ethanol work as the core stream, cladding streams and auxiliary cladding streams. In the numerical simulation, the electric force acts as a body force. The governing equations are solved by a finite volume method on a Cartesian fixed staggered grid. The evolution of the interface was captured by the level set method. The results show that the focal length in the focusing mode and the divergent angle of the light beam in the diverging mode can be tuned by adjusting the external electric field at fixed flow rates. The numerical results have a reasonable agreement with the experimental results.

Design and Fabrication of a Tunable Optofluidic Microlens Driven by an Encircled Thermo-Pneumatic Actuator

In Situ Fabrication of a Tunable Microlens.

Design and Fabrication Optofluidic Tunable Lens by 3D Printing

Flexible fluidic lens with polymer membrane and multi-flow structure

Bioinspired solid–liquid mixed tunable lens with multilayered structure

Wafer-scale fabricated thermo-pneumatically tunable microlenses

Tunable Microfluidic Optical Devices with an Integrated Microlens Array

Tunable Optofluidic Microbubble Lens.

All‐Glass 3D Optofluidic Microchip with Built‐in Tunable Microlens Fabricated by Femtosecond Laser‐Assisted Etching

Discretely Tunable Optofluidic Compound Microlenses.

Optofluidic Tunable Lenses for In-Plane Light Manipulation

A Tunable Optofluidic Lens Based on Combined Effect of Hydrodynamics and Electroosmosis

Design and Characteristics of Tunable In-Plane Optofluidic Lens Actuated by Viscous Force

Novel Optofluidic Imaging System Integrated with Tunable Microlens Arrays

Design and Analysis for Thermal Actuated Tunable Polymer Microlens

Ultra-thin, Zoom Capable, Flexible Metalenses with High Focusing Efficiency and Large Numerical Aperture

Liquid Microlens with Tunable Focal Length and Light Transmission

Tunable Optofluidic Fresnel Lens with Ring-Shaped Electrodes

Optofluidic Microlenses: All‐Glass 3D Optofluidic Microchip with Built‐in Tunable Microlens Fabricated by Femtosecond Laser‐Assisted Etching (advanced Optical Materials 9/2018)

An electrokinetically tunable optofluidic bi-concave lens.

Thermal Actuated Solid Tunable Lens