Development and Verification of a Reduced Dimethoxymethane/n-Heptane/toluene Kinetic Mechanism and Modelling for CI Engines
Xiuyong Shi,Weiwei Qian,Haoyu Wang,Mingzhang Pan,Qiwei Wang,Jimin Ni
DOI: https://doi.org/10.1016/j.applthermaleng.2022.118855
IF: 6.4
2022-01-01
Applied Thermal Engineering
Abstract:Dimethoxymethane (CH3OCH2OCH3, DMM) has been regarded as a potential alternative fuel for CI engines due to its advantage of high oxygen contents and renewability. However, little investigation has been conducted for computational fluid dynamics (CFD) simulation because of the lack of appropriate reduced mechanisms of DMM. In this study, a reduced DMM/n-heptane/toluene kinetic mechanism is developed, which contains 173 species and 698 reactions based on the decoupling methodology. In addition, the new reduced mechanism has been validated via comparison to experiments of ignition delay times, laminar flame speeds, and species concentrations. It is found that the prediction of reduced kinetic mechanism proposed by this study can well capture the combustion characteristics of dimethoxymethane, n-heptane, and toluene. Meanwhile, it is worth noting that the maximum flame speeds of DMM appears at a slightly richer mixture (higher equivalence ratio) in comparison with n-heptane. The DMM maximum laminar flame speeds of 45 cm/s, 55 cm/s, and 64 cm/s are observed at temperatures of 298 K, 328 K, and 358 K, respectively. Eventually, the proposed model has been coupled with CFD software to simulate the combustion process of CI engines, the results indicate that both the simulated pressure and heat release rate have a good agreement with the experiments. Moreover, the addition of DMM leads to an increase in NO product, while a reduction in soot distribution.