Abstract:This study proposes a clustered dynamic adaptive chemistry (CDAC) method, which uses an iterative K-means algorithm to partition the computational cells into different groups according to their similarity in terms of the temperature and significant species compositions. Taking advantage of the clustered cells, the averaged thermo-chemical properties of the cells in the respective clusters are then used to identify the adaptive dynamic reduced chemistry through the method of direct relation graph with error propagation (DRGEP). Moreover, the integration of the chemical source term, which commonly dominates the computational effort in reactive flow simulations, is now performed using the dynamic adaptive reduced chemistry at the cluster level instead of the cell level. With this CDAC method, the on-the-fly DRGEP process as well as the chemistry integration only needs to be conducted at the cluster level, dramatically reducing the unnecessary repeated computation for similar computational cells. In addition, the adaptive dynamic reduced chemistry further accelerates the chemistry integration process due to less ordinary differential equations (ODEs) to be solved for each cluster. This newly proposed CDAC method was tested in multi-dimensional homogeneous charged compression ignition engine (HCCI), direct injection compression ignition (DICI) engine and constant volume chamber combustion (CVCC) fueled with diesel, biodiesel and kerosene through the use of their respective surrogate fuel mechanisms under different operating conditions. The performance of CDAC in terms of accuracy and efficiency were extensively analyzed and discussed using different user-defined parameters, mechanisms with different surrogate components and number of species as well as different meshes with different number of grid cells. Based on this analysis, the error tolerances in DRGEP and the error tolerances of the temperature and significant species' mass fraction are recommended as: epsilon(d) <= 0.001, epsilon(T) 20K and epsilon(Y) <= 0.01 to achieve less than 0.1% integral error. With these recommended user-defined tolerances, it can be observed that the current CDAC method is able to accurately predict the in-cylinder pressure as well as the species profile in HCCI, DICI and the flame lift-off length in CVCC when compared with the full chemistry calculations as well as the experimental results. Moreover, with the recommended user defined error tolerances and a chemical kinetic model of 112 species, this CDAC method is capable of achieving a computational time speed-up factor of more than 3 compared to the conventional DAC and of almost 5 compared to the full chemistry. Finally, the CDAC method coupled CFD was applied to simulate a diesel DICI engine under three different engine speeds with a detailed primary reference fuel (PRF) mechanism of more than 1000 species. The 3-D simulation could be finished in acceptable CPU time while being able to well capture the experimental in-cylinder pressure and heat release rate for all the three engine speeds. (C) 2018 The Combustion Institute. Published by Elsevier Inc. All rights reserved.

Reduced Kinetic Model for DME Combustion Mechanism based on Sensitivity Analysis

A Reduced Combustion Kinetic Model for the Methanol-Gasoline Blended Fuels on SI Engines

A simplified chemical kinetic model with a reaction mechanism based on a multidimensional average error iteration method for ammonia and ammonia/hydrogen combustion

Computational Acceleration of Multi-Dimensional Reactive Flow Modelling Using Diesel/biodiesel/jet-Fuel Surrogate Mechanisms Via a Clustered Dynamic Adaptive Chemistry Method

A chemical mechanism of pollutants formation during combustion in gas turbines

Simulation on Diesel/DME Mixed Injection System

Combustion model development of future DI engines for carbon emission reduction

A Reduced Multicomponent Diffusion Model

Toward Machine Learned Highly Reduce Kinetic Models For Methane/Air Combustion

Modeling of high-speed, methane-air, turbulent combustion, Part II: Reduced methane oxidation chemistry

Modeling of a Reduced Hybrid H2–Air Kinetic Scheme Integrating the Effect of Hypersonic Reactive Air with Supersonic Combustion

An Autoignition Combustion Model for Homogeneous Charge Compression Ignition Engine Cycle Simulations

Reduced chemical kinetics mechanism for modelling of n-Heptane/syngas combustion with NOx formation in a micro-pilot ignited dual fuel engine

An optimized kinetic model for H 2 /CO combustion in CO 2 diluent at elevated pressures

Construction and Analysis of A Chemical Kinetic Model for Monomethylhydrazine/Nitrogen Tetroxide Reactions

Chemical kinetic model reduction based on species‐targeted local sensitivity analysis

Development of a reduced combustion model for ammonia/hydrogen combustion

Numerical simulation of ammonia/methane/air combustion using reduced chemical kinetics models

Chemical Kinetic Model for Ignition of Three-Component Fuel Comprising Iso-Octane/N-Heptane/Ethanol

Development and Validation of a Quasi-Dimensional Combustion Model for SI Engines Fuelled by HCNG with Variable Hydrogen Fractions

On the Development of Detailed and Reduced Reaction Mechanisms for Combustion Modeling