Abstract:Methanol is an attractive oxygenate increasingly used as primary fuel for dual-fuel combustion technology yielding beneficial thermal-efficiency and emissions in modern engines. As such, it is significant to fundamentally understand the autoignition behavior of methanol/diesel mixtures. This study measured the ignition delay times (IDTs) of methanol/diesel blends with different mixing ratios (30%, 50%, 70% methanol by mol.) on a heated shock tube and a heated rapid compression machine at temperatures of 650-1450 K, pressures of 6-20 bar, and equivalence ratios of 0.5, 1.0 and 2.0. The typical two-stage ignition characteristics with the negative temperature coefficient response were observed for dual-fuel mixtures. In general, both the total and first-stage IDTs decrease with the increment of pressure and equivalence ratio as well as diesel proportion in mixtures. The simulation results performed with a published detailed mechanism in conjunction with a tri-component diesel surrogate demonstrate generally good agreement with the experimental data at all test conditions. Moreover, a crossover of IDTs occurs at a higher temperature (similar to 1500 K) for varying equivalence ratios, and experiment and simulation both exhibit a non-linear mixing effect of methanol addition on diesel ignition. Interestingly, simulation results clearly suggest a crossover (similar to 940 K) for mixtures with varying methanol content at an intermediate-temperature, where the IDT of the mixture with a lower methanol ratio becomes longer as the temperature is higher than that of the crossover. Furthermore, brute-force sensitivity analyses assisted with reaction path analysis were conducted to gain deeper insights into the autoignition chemistry of dual-fuel mixtures, especially for the chemical interaction between both fuels during the low-temperature oxidation process. It is found that methanol hardly generates center dot OH, whereas center dot OH is mainly produced by the low-temperature reaction pathways of diesel. Thus, center dot OH is the bridge for both fuels during the ignition process. At the high methanol ratio, the H-abstraction of diesel is mainly via center dot HO2 while CH3OH consumes a large percentage of center dot OH. Consequently, the competition between methanol and diesel for center dot OH radicals inhibits the overall reactivity of reaction network. In addition, the original data reported here lay a foundation for the development and validation of more accurate and robust dual-fuel kinetic schemes. (C) 2021 The Combustion Institute. Published by Elsevier Inc. All rights reserved.

Construction and Analysis of A Chemical Kinetic Model for Monomethylhydrazine/Nitrogen Tetroxide Reactions

Theoretical Study of the Second- and Third-H-abstraction Reactions of Monomethylhydrazine and Nitrogen Dioxide and Its Application to Hypergolic Ignition Modeling

Chemical Mechanism of MMH/NTO and Simulation in a Small Liquid Rocket Engine

Sensitivity analysis of kinetic, thermodynamic, and transport parameters in HMX (1,3,5,7- tetranitro-1,3,5,7-tetrazocane) combustion modeling

Measurements of the High Temperature Ignition Delay Times and Kinetic Modeling Study on Oxidation of Nitromethane

Chemical Kinetic Model for Ignition of Three-Component Fuel Comprising Iso-Octane/N-Heptane/Ethanol

Auto-ignition Behaviors of Nitromethane in Diluted Oxygen in a Rapid Compression Machine: Critical Conditions for Ignition, Ignition Delay Times Measurements, and Kinetic Modeling Interpretation.

Ab initio kinetics of H-atom abstraction from monomethylhydrazine

A simplified chemical kinetic model with a reaction mechanism based on a multidimensional average error iteration method for ammonia and ammonia/hydrogen combustion

An experimental and kinetic modeling study of a premixed nitromethane flame at low pressure

Development of a Detailed Chemical Kinetic Model for 1-Methylnaphthalene

Modeling of Spray Combustion and Heat Transfer of MMH/N2O4 in a Small Rocket Engine Using Different Mechanisms

Experimental And Kinetic Modeling Study On Self-Ignition Of Alpha-Methylnaphthalene In A Heated Rapid Compression Machine

Experimental and Kinetic Modeling Study on the Low-Temperature Decomposition and Autoignition of 2-Azido-n,n-dimethylethanamine: A Promising Green Mono- and Bi-Propellant

Experimental and Kinetic Modeling Study on Self-Ignition of α-Methylnaphthalene in a Heated Rapid Compression Machine

Modeling of a Reduced Hybrid H2–Air Kinetic Scheme Integrating the Effect of Hypersonic Reactive Air with Supersonic Combustion

Autoignition Behavior of Methanol/diesel Mixtures: Experiments and Kinetic Modeling

An experimental and kinetic modeling study of premixed nitromethane flames at low pressure

Nitromethane Pyrolysis and Oxidation in a Jet-Stirred Reactor: Experimental Measurements, Kinetic Model Validation and Interpretation

Investigating Autoignition Characteristics of Ammonia/Heptamethylnonane Mixtures over Wide Pressure Ranges: Rapid Compression Machine Measurements and Kinetic Modeling Study

Study on combustion mechanism of methanol/nitromethane based on reactive molecular dynamics simulation