Abstract:A segmented-cladding fiber (SCF) has a uniform core of high refractive index and a cladding consisting of alternating high and low refractive-index angular segments. It is known that such a fiber can be designed to provide effective single-mode operation with an ultra-large core size. In this paper, we analyze a SCF that is doped with erbium ions in its high-index regions (i.e., the core and the high-index cladding segments). The core of the fiber has a diameter of 20 pin and the cladding consists of 8 segments of equal size. The concentration of the erbium ions is 1 x 10(26). We calculate the mode-field distributions in the fiber at the signal (1530 nm) and the pump (980 nm) wavelength with the finite-element method. We obtain the gain characteristics and the pump efficiency of the fiber by solving the propagation rate equations. Assuming an initial signal power of 1 mu W, the threshold pump power required is 102 mW for a 30-cm long fiber. The optimal gain of the fiber is 25 dB, which can be achieved with a fiber length of 26 cm and a pump power of 150 mW. Our results confirm that a properly designed SCF can provide highly efficient optical amplification with a short length.

Theoretical Modelling of Cascaded Er3+-Doped, Tm3+-Doped and Nd3+-Doped Fibers for 0.4 to 2.0 Μm Emission Spectra

Theoretical and Experimental Analysis of Bidirectionally Pumped 1.3 Μm Pr3+-doped ASE Source

A Novel Two-Stage Erbium Amplified Spontaneous Emission Fiber Source with 80nm Bandwidth

Modeling Nd 3+ -Yb 3+ -Tm 3+ -Er 3+ Codoped Telluride Glass Fiber for 0.4 to 2.0 Μm Emission Spectra

Amplification and Spontaneous Emission of Er-doped Fiber Both in Theory and Experiment

2 $μ$m Watt-level Fiber Amplifiers, Lasers, and ASE Sources Pumped by Broadband ASE Pumps

Broadband 27 Μm Amplified Spontaneous Emission of Er^3+ Doped Tellurite Fibers for Mid-Infrared Laser Applications

Theoretical and Experimental Investigations on Erbium-Doped Fiber Amplifiers

Broadband 2.7 μm amplified spontaneous emission of Er 3+ doped tellurite fibers for mid-infrared laser applications

Numerical Simulation Of 980 Nm-Ld-Pumped Yb3+-Er3+-Tm3+-Codoped Fiber Amplifier For 1500nm And 1600nm Bands

933 W Yb-doped Fiber ASE Amplifier with 504 Nm Bandwidth

Numerical Model of an Er3+-Tm3+-Pr3+-codoped Fiber Amplifier Pumped with an 800 Nm Laser Diode.

Numerical Simulation of 980 nm-LD-Pumped Yb 3 +-Er 3 +-Tm 3 +-Codoped Fiber Amplifier for 1500 nm and 1600 nmBands

A Novel Conventional/Long-Band Erbium-Doped Fibre Amplified Spontaneous Emission Source With 80 Nm Bandwidth

Amplified Spontaneous emission from optical fibers containing anisotropic morphology CdSe/CdS quantum dots under CW excitation

High Power Broadband Amplified Spontaneous Emission Source Near 3 $\mu $ M

Numerical modeling of an ASE suppression and power scalable approach in 1908?nm LMA-TDFO

High-power and high-brightness Er:Yb codoped fiber MOPA operating at 1535 nm

Characterization of Amplified Spontaneous Emission from Er^3＋-Doped Tellurite Fibre

Analysis of Erbium-Doped Segmented-Cladding Fiber for Optical Amplification

Broadband Near-Infrared Amplified Spontaneous Emission of Er3+-doped Germanate Glass Fiber.