Abstract:A novel super-fluorescence fiber source (SFS) in the wavelength range that covers the C+L-band with stable spectrum, high output power and high slope efficiency is demonstrated. The topology consists of two stages: the first stage provides primarily the L-band gain spectrum whilst the second is solely for the C-band. These two stages are combined in series. We merely used the low erbium-doped fiber (EDF) 10.8m long as a gain medium in the second stage, which was pumped backward by a 980nm semiconductor laser diode (LD). As a result, the Amplified Spontaneous Emission (ASE) spectrum had a threshold of 5.1mW and a slope efficiency of 13.48% in the C-band. With a 980 nm LD pumping forward at 11-m-long moderate EDF and 58-m-long low EDF in series, L-band ASE was yielded with 52.3 mW threshold and a slope efficiency of 35.82% in the first stage. The ASE in the L-band was put into the second stage through an isolator and combined with C-band ASE as an output then a broad ASE spectrum of C+L-band was observed. The maximum output power of the C+L-band source was 33mW (15.3dBm) and its power stability was better than 0.02 dB. Through the optimization of fiber parameters and the adjustment of pumping power in both stages, the flatness of ASE spectrum was improved. The optical bandwidth for the SFS output power, which ripples in 3 dB, was 63.7 nm (1536.92-1600.62 nm) of optical bandwidth without gain flattening filter.

A Novel Two-Stage Erbium Amplified Spontaneous Emission Fiber Source with 80nm Bandwidth

A Novel Conventional/Long-Band Erbium-Doped Fibre Amplified Spontaneous Emission Source With 80 Nm Bandwidth

C+L-Band Erbium-Doped Fiber Broadband Light Source Using One-Stage Configuration

Low-Ripple and High-Efficiency C+L-Band Erbium-Doped Fiber Amplified-Spontaneous-Emission Sources Using A Dual Forward Pumping Configuration

A Selective C and L-Band Amplified Spontaneous Emission Source Using a 1×2 Optical Switch

A Double-pass Erbium-doped Fiber Based Broadband ASESource by Utilizing C-band ASE Compensation

A C+L-band Erbium-Doped Fiber ASE Source Using Dual-Forward Pumping Configuration

Simulation Analysis of One-Stage C+L-band Erbium-Doped Fiber ASE Source with Double-Pass Bi-Directional Pumping Configuration

Band Selective ASE Source for Dual-Band DWDM Device Characterization and Metro Networks

Design and Optimization of a High-Power L-band ASE Fiber Source

Soa-Pumped Erbium-Doped Ase Fibre Source with Flattened Spectrum and High Power Density

Two-Stage High-Power L-Band Superfluorescent Fiber Source

933 W Yb-doped Fiber ASE Amplifier with 504 Nm Bandwidth

Resonantly Pumped High Power Flat L-band Erbium-Doped Superfluorescent Fiber Source

Experimental Investigation on the C Plus L-Band Super-Fluorescence Fiber Source

Broadband Supercontinuum Generation Based on Ytterbium-Doped Fiber Amplifier Seeded by Self-Pulsed Amplified Spontaneous Emission Source

Characteristics Comparison of Optimal L-Band Er-Doped Ase Sources in Different Configurations

Low-spatial-coherence broadband fiber source for speckle free imaging

High Pump Conversion Efficiency and Broad L-Band ASE Sourceby Using Sagnac Feedback Loop

Flat broadband erbium-doped fiber ASE source based on symmetric nonlinear optical loop mirror

High Efficiency Broad Bandwidth Erbium-Doped Superfluorescent Fiber Source