Abstract:Objective: Active exoskeletons can handle different walking conditions, but require bulky components (e.g., motors) that need a significant source of power to do so. Purely passive exoskeletons are lightweight and energy-neutral, containing energy-recycling mechanisms that capture energy loss during negative power phases and return it as walking assistance. However, they are usually designed for stereotyped gaits (e.g., walking at fixed speed) and thus show poor adaptivity for variable conditions. This study is aimed to overcome these issues. Methods: A quasi-passive ankle exoskeleton is designed to integrate the merits of both active and passive exoskeletons, which captures the heel-strike energy loss and recycles it into propulsion. A novel, lightweight, energy-saving clutch and a heel-strike energy-storage mechanism are developed. They are coupled by a series spring that assists user's calf muscles. Six healthy subjects walked with the device on level ground and inclined surfaces to validate its functionality. Results: Level ground studies indicate that the energy-storage mechanism enhances the assistance by increasing the output torque of the exoskeleton. Reductions in metabolic cost (6.4 ± 1.3%, p < 0.05) were observed. During uphill walking, the assistance torque decreased compared with that on level ground, but it still reduced overall metabolic cost compared with baseline walking. During downhill walking, the assistance torque increased, but metabolic cost also slightly increased. Conclusion: These results demonstrate the functionality of the prototype on level ground and its limitations on inclined surfaces. Significance: The proposed device highlights the possibility of widening the potential applications of exoskeletons.

Design and Preliminary Evaluation of A Clutch-Spring Lower Limb Exoskeleton

Design and analysis of a passive exoskeleton with its hip joint energy–storage

Design of a Passive Gait-based Ankle-foot Exoskeleton with Self-adaptive Capability

Design and Experimental Evaluation of Wearable Lower Extremity Exoskeleton with Gait Self-adaptivity

Design and Gait Realization of Power-assisted Lower Limbs Exoskeleton

Design and analysis of a passive knee assisted exoskeleton

A Lower Extremity Exoskeleton System for Walking Assist

Design of an Ankle Exoskeleton That Recycles Energy to Assist Propulsion During Human Walking

Exoskeleton Design Utilizing Foot-Strike Energy for Enhancing the Climbing Ability of the Wearer

Analysis and Evaluation of a Quasi-Passive Lower Limb Exoskeleton for Gait Rehabilitation

Design and First Operation of an Active Lower Limb Exoskeleton with Parallel Elastic Actuation

Mechanical design of a passive lower-limb exoskeleton for load-carrying assistance

Design of a passive lower limb exoskeleton for walking assistance with gravity compensation

A Hip-driven exoskeleton for Walking Assistance based on a Clutch-type Elastic Actuator

Mechanical Design of a Lower Extremity Exoskeleton with Hybrid Legs for Power Augmentation

Development of a low-power wearable powered waist exoskeleton with mechanical clutch

Design and Control of a Novel Semi-Passive Knee Exoskeleton

Preliminary Evaluation of a Lower-Limb Exoskeleton - Stair Climbing

Human-machine Coupled Research of a Passive Lower Limb Exoskeleton for Walking Assistance

Design and Implementation of a Lower Extremity Exoskeleton for Walking Assist

Multi-articular Passive Exoskeleton for Reducing the Metabolic Cost During Human Walking