Abstract:Recently the research on hydraulically actuated exoskeleton becomes an attractive topic for those application requirements of human performance augmentation. The control goal of this type of exoskeleton system is to minimize the human machine interaction force. And it becomes more challenging for hydraulically actuated lower limb exoskeleton where the multi-variable nonlinear dynamics is quite complicated and multiple walking phases are existing. Furthermore, since the exoskeleton is driven by the hydraulic actuators, the accurate output force tracking can not be easily realized due to the large compressibility of hydraulic oil. This paper focuses on the human machine interaction force control and the walking phase partition of the hydraulically actuated lower limb exoskeleton. Firstly, a cascade interaction force control strategy is proposed for a 3-DOF support leg which is the basic partitioned module of the lower limb exoskeleton. The spring model is built for the dynamics of human-machine interface, and a high level controller minimizing the integral of human-machine interaction force is designed to generate the desired joint trajectories of the exoskeleton which can be considered as the human motion intent. Subsequently, an independent joint based PID controller is developed in the low level to achieve the good tracking of the above generated human motion intent. Secondly, the exoskeleton system in different walking phases is partitioned into three serial chain manipulator modules. For each serial chain manipulator module, the proposed cascade interaction force controller is applied to minimize the human machine interaction force at the end effector. Finally, the walking experiments with 20Kg load on a practical hydraulically actuated lower limb exoskeleton are carried out to validate the effectiveness of the proposed approach.

Design and Implementation of a Lower Extremity Exoskeleton for Walking Assist

A Lower Extremity Exoskeleton System for Walking Assist

Design and Gait Realization of Power-assisted Lower Limbs Exoskeleton

Adaptive CPG-Based Impedance Control for Assistive Lower Limb Exoskeleton

Design of a Purely Mechanical Sensor-Controller Integrated System for Walking Assistance on an Ankle-Foot Exoskeleton

[Exoskeleton Robot System Based on Real-Time Gait Analysis for Walking Assist].

Design and Gait Control of an Active Lower Limb Exoskeleton for Walking Assistance

A Weight-Supporting Wearable Robot for Walking Assist

Human-in-the-Loop Control of a Wearable Lower Limb Exoskeleton for Stable Dynamic Walking

Cascade Force Control of Lower Limb Hydraulic Exoskeleton for Human Performance Augmentation

Design and Preliminary Evaluation of a Lightweight, Cable-Driven Hip Exoskeleton for Walking Assistance

Design and analysis of a lower limb assistive exoskeleton robot

A Time Division Multiplexing Inspired Lightweight Soft Exoskeleton for Hip and Ankle Joint Assistance

A Lower Limb Exoskeleton With Rigid and Soft Structure for Loaded Walking Assistance

Mechatronic Design of a Shank-Free Bilateral Exoskeleton for Loaded Walking

Design and Preliminary Evaluation of A Clutch-Spring Lower Limb Exoskeleton

Single-input adaptive fuzzy sliding mode control of the lower extremity exoskeleton based on human–robot interaction:

Mechanical design of a passive lower-limb exoskeleton for load-carrying assistance

Development and Adaptive Fuzzy Control of a Walking Robotic Exoskeleton for Passive Body Weigh Support

Design and analysis of a passive exoskeleton with its hip joint energy–storage

Design and Evaluation of Torque Compensation Controllers for a Lower Extremity Exoskeleton