Abstract:Recently the research on hydraulically actuated exoskeleton becomes an attractive topic for those application requirements of human performance augmentation. The control goal of this type of exoskeleton system is to minimize the human machine interaction force. And it becomes more challenging for hydraulically actuated lower limb exoskeleton where the multi-variable nonlinear dynamics is quite complicated and multiple walking phases are existing. Furthermore, since the exoskeleton is driven by the hydraulic actuators, the accurate output force tracking can not be easily realized due to the large compressibility of hydraulic oil. This paper focuses on the human machine interaction force control and the walking phase partition of the hydraulically actuated lower limb exoskeleton. Firstly, a cascade interaction force control strategy is proposed for a 3-DOF support leg which is the basic partitioned module of the lower limb exoskeleton. The spring model is built for the dynamics of human-machine interface, and a high level controller minimizing the integral of human-machine interaction force is designed to generate the desired joint trajectories of the exoskeleton which can be considered as the human motion intent. Subsequently, an independent joint based PID controller is developed in the low level to achieve the good tracking of the above generated human motion intent. Secondly, the exoskeleton system in different walking phases is partitioned into three serial chain manipulator modules. For each serial chain manipulator module, the proposed cascade interaction force controller is applied to minimize the human machine interaction force at the end effector. Finally, the walking experiments with 20Kg load on a practical hydraulically actuated lower limb exoskeleton are carried out to validate the effectiveness of the proposed approach.

A Hip-driven exoskeleton for Walking Assistance based on a Clutch-type Elastic Actuator

Design and analysis of a passive exoskeleton with its hip joint energy–storage

Real Time Gait Planning for a Mobile Medical Exoskeleton with Crutche.

Design and Preliminary Evaluation of a Lightweight, Cable-Driven Hip Exoskeleton for Walking Assistance

A Time Division Multiplexing Inspired Lightweight Soft Exoskeleton for Hip and Ankle Joint Assistance

Design Of The Clutched Variable Parallel Elastic Actuator (Cvpea) For Lower Limb Exoskeletons

Multi-articular Passive Exoskeleton for Reducing the Metabolic Cost During Human Walking

Design of an Ankle Exoskeleton That Recycles Energy to Assist Propulsion During Human Walking

Design of a Purely Mechanical Sensor-Controller Integrated System for Walking Assistance on an Ankle-Foot Exoskeleton

Analysis, Design, and Preliminary Evaluation of a Parallel Elastic Actuator for Power-Efficient Walking Assistance

A flexible exoskeleton for hip assistance

Design and Preliminary Evaluation of A Clutch-Spring Lower Limb Exoskeleton

A Lower Extremity Exoskeleton System for Walking Assist

Cascade Force Control of Lower Limb Hydraulic Exoskeleton for Human Performance Augmentation

A Lightweight Ankle Exoskeleton Amplifying Input Power to Create High Power Assistance

The Control System for Flexible Hip Assistive Exoskeleton

Design and analysis of a passive knee assisted exoskeleton

Optimization of an Unpowered Energy-Stored Exoskeleton for Patients with Spinal Cord Injury

Exoskeleton active assistance strategy for human muscle activation reduction during linear and circular walking

Adaptive Oscillator-Based Robust Control for Flexible Hip Assistive Exoskeleton

Foot-wheel Driven Exoskeleton for Rehabilitation Training of Paraplegic Patients