Abstract:In this paper, a double compact elastic module is designed and implemented in the lower extremity exoskeleton. The double compact elastic module is composed of two parts, i.e., physical human robot interaction (pHRI) measurement and the elastic actuation system (EAS), which are called proximal elastic module (PEM) and distal elastic module (DEM) respectively. The PEM is used as the pHRI information collection device while the DEM is used as the compliance device. A novel compact parallelogram-like structure based torsional spring is designed and developed. An iterative finite element analysis (FEA) based optimization process was conducted to find the optimal parameters in the search space. In the PEM, the designed torsional spring has an outer circle with a diameter of 60 mm and an inner hole with a diameter of 12 mm, while in the DEM, the torsional spring has the outer circle with a diameter of 80 mm and the inner circle with a diameter of 16 mm. The torsional spring in the PEM has a thickness of 5 mm and a weight of 60 g, while that in the DEM has a thickness of 10 mm and a weight of 80 g. The double compact elastic module prototype is embedded in the mechanical joint directly. Calibration experiments were conducted on those two elastic modules to obtain the linear torque versus angle characteristic. The calibration experimental results show that this torsional spring in the PEM has a stiffness of 60.2 Nm rad−1, which is capable of withstanding a maximum torque of 4 Nm, while that in the DEM has a stiffness of 80.2 Nm rad−1, which is capable of withstanding a maximum torque of 30 Nm. The experimental results and the simulation data show that the maximum resultant errors are 6 % for the PEM and 4 % for the DEM respectively. In this paper, an assumed regression algorithm is used to learn the human motion intent (HMI) based on the pHRI collection. The HMI is defined as the angular position of the human limb joint. A closed-loop position control strategy is utilized to drive the robotic exoskeleton system to follow the human limb's movement. To verify the developed system, experiments are performed on healthy human subjects and experimental results show that this novel robotic exoskeleton can help human users walk, which can be extended and applied in the assistive wearable exoskeletons.

Analysis, Design, and Preliminary Evaluation of a Parallel Elastic Actuator for Power-Efficient Walking Assistance

Design Of The Clutched Variable Parallel Elastic Actuator (Cvpea) For Lower Limb Exoskeletons

A Hip-driven exoskeleton for Walking Assistance based on a Clutch-type Elastic Actuator

Design and Analysis of a Clutched Parallel Elastic Actuator

Conceptual Design, Modeling and Control of a Rigid Parallel Serial-Elastic Actuator

The Design and Testing of a PEA Powered Ankle Prosthesis Driven by EHA

Analysis, Design and Preliminary Evaluation of an Anthropometric Self-Stabilization Passive Exoskeleton for Enhancing the Ability of Walking with Loads.

Development and Analysis of an Electrically Actuated Lower Extremity Assistive Exoskeleton

A Parallel Compliant Leg for Energy Efficient Walking of Exoskeleton–walker Systems

Design and evaluation of a parallel-series elastic actuator for lower limb exoskeletons

Design and Preliminary Validation of a Lower Limb Exoskeleton with Compact and Modular Actuation

Parallel Elastic Self-Alignment Mechanism Enhances Energy Efficiency and Reduces Misalignment in a Powered Knee Exoskeleton

Design, Optimization and Energetic Evaluation of an Efficient Fully Powered Ankle-Foot Prosthesis with a Series Elastic Actuator

A Portable Variable Stiffness Unpowered Aided Exoskeleton Design

Design and analysis of a passive knee assisted exoskeleton

Development of a Lower Extremity Wearable Exoskeleton with Double Compact Elastic Module: Preliminary Experiments

Design and First Operation of an Active Lower Limb Exoskeleton with Parallel Elastic Actuation

Knee Flexion-Assisted Method for Human-Exoskeleton System

Design and analysis of a passive exoskeleton with its hip joint energy–storage

A Lightweight Ankle Exoskeleton Amplifying Input Power to Create High Power Assistance

Design and Performance Analysis of a Compact Series Elastic Actuator for Exoskeletons