Abstract:Several robotics applications require high torque-to-weight ratio and energy efficient actuators. Progress in that direction was made by introducing compliant elements into the actuation. A large variety of actuators were developed such as series elastic actuators (SEAs), variable stiffness actuators and parallel elastic actuators (PEAs). SEAs can reduce the peak power while PEAs can reduce the torque requirement on the motor. Nonetheless, these actuators still cannot meet performances close to humans. To combine both advantages, the series parallel elastic actuator (SPEA) was developed. The principle is inspired from biological muscles. Muscles are composed of motor units, placed in parallel, which are variably recruited as the required effort increases. This biological principle is exploited in the SPEA, where springs (layers), placed in parallel, can be recruited one by one. This recruitment is performed by an intermittent mechanism. This paper presents the development of a SPEA using the MACCEPA principle with a self-closing mechanism. This actuator can deliver a bi-directional output torque, variable stiffness and reduced friction. The load on the motor can also be reduced, leading to a lower power consumption. The variable recruitment of the parallel springs can also be tuned in order to further decrease the consumption of the actuator for a given task. First, an explanation of the concept and a brief description of the prior work done will be given. Next, the design and the model of one of the layers will be presented. The working principle of the full actuator will then be given. At the end of this paper, experiments showing the electric consumption of the actuator will display the advantage of the SPEA over an equivalent stiff actuator.

Conceptual Design, Modeling and Control of a Rigid Parallel Serial-Elastic Actuator

Novel series elastic actuator design and velocity control

Design and Analysis of a Clutched Parallel Elastic Actuator

Design of a Parallel Elastic Actuator with a Continuously-Adjustable Equilibrium Position

Design Of The Clutched Variable Parallel Elastic Actuator (Cvpea) For Lower Limb Exoskeletons

Analysis, Design, and Preliminary Evaluation of a Parallel Elastic Actuator for Power-Efficient Walking Assistance

Bi-directional series-parallel elastic actuator and overlap of the actuation layers

The Design and Testing of a PEA Powered Ankle Prosthesis Driven by EHA

Design and Compliance Control of Rehabilitation Exoskeleton for Elbow Joint Anchylosis

Design and Control of an Electrohydraulic Soft Actuator System for Robotic Grippers

An adaptive compliance position control based on EKF for series elastic actuation

Lightweight Electrohydrostatic Actuator Drive Solution for Exoskeleton Robots

Design and Control of a Series-Parallel Elastic Actuator for a Weight-Bearing Exoskeleton Robot

Design, modeling, and control of a Series Elastic Actuator with Discretely Adjustable Stiffness (SEADAS)

Design and First Operation of an Active Lower Limb Exoskeleton with Parallel Elastic Actuation

Design and Control of a Novel Variable Stiffness Series Elastic Actuator

A Novel Optimization Design of Dual-Slide Parallel Elastic Actuator for Legged Robots

Design and Preliminary Results of a Reaction Force Series Elastic Actuator for Bionic Knee and Ankle Prostheses

Optimally Controlling the Timing of Energy Transfer in Elastic Joints: Experimental Validation of the Bi-Stiffness Actuation Concept

Optimum design and preliminary experiments of a novel parallel end traction apparatus for upper-limb rehabilitation

Minimizing Energy Consumption and Peak Power of Series Elastic Actuators: A Convex Optimization Framework for Elastic Element Design