Abstract:Objective: Active exoskeletons can handle different walking conditions, but require bulky components (e.g., motors) that need a significant source of power to do so. Purely passive exoskeletons are lightweight and energy-neutral, containing energy-recycling mechanisms that capture energy loss during negative power phases and return it as walking assistance. However, they are usually designed for stereotyped gaits (e.g., walking at fixed speed) and thus show poor adaptivity for variable conditions. This study is aimed to overcome these issues. Methods: A quasi-passive ankle exoskeleton is designed to integrate the merits of both active and passive exoskeletons, which captures the heel-strike energy loss and recycles it into propulsion. A novel, lightweight, energy-saving clutch and a heel-strike energy-storage mechanism are developed. They are coupled by a series spring that assists user's calf muscles. Six healthy subjects walked with the device on level ground and inclined surfaces to validate its functionality. Results: Level ground studies indicate that the energy-storage mechanism enhances the assistance by increasing the output torque of the exoskeleton. Reductions in metabolic cost (6.4 ± 1.3%, p < 0.05) were observed. During uphill walking, the assistance torque decreased compared with that on level ground, but it still reduced overall metabolic cost compared with baseline walking. During downhill walking, the assistance torque increased, but metabolic cost also slightly increased. Conclusion: These results demonstrate the functionality of the prototype on level ground and its limitations on inclined surfaces. Significance: The proposed device highlights the possibility of widening the potential applications of exoskeletons.

Design and Control of a Novel Semi-Passive Knee Exoskeleton

Design and analysis of a passive knee assisted exoskeleton

Design and Evaluation of a Mobile Ankle Exoskeleton with Switchable Actuation Configurations

Development and Analysis of an Electrically Actuated Lower Extremity Assistive Exoskeleton

Design of an Ankle Exoskeleton That Recycles Energy to Assist Propulsion During Human Walking

Design and analysis of a passive exoskeleton with its hip joint energy–storage

Design and Preliminary Evaluation of A Clutch-Spring Lower Limb Exoskeleton

Design an Underactuated Soft Exoskeleton to Sequentially Provide Knee Extension and Ankle Plantarflexion Assistance

Design and Evaluation of a Bilateral Mobile Ankle Exoskeleton with High-Efficiency Actuation

Novel Lightweight Lower Limb Exoskeleton Design for Single-Motor Sequential Assistance of Knee & Ankle Joints in Real World

Design and Evaluation of a Self-Aligning Knee Exoskeleton for Knee Extension Assistance During Walking

Biofusion design and parameter optimization for a novel passive assisted knee exoskeleton robot based on eight-bar mechanism

Design and First Operation of an Active Lower Limb Exoskeleton with Parallel Elastic Actuation

Design of a Lightweight and Flexible Knee Exoskeleton with Compensation Strategy

Design and Evaluation of Torque Compensation Controllers for a Lower Extremity Exoskeleton

Bionic Design and Optimization of a Rigid-Soft Hybrid Knee Exoskeleton

Mechanical design of a passive lower-limb exoskeleton for load-carrying assistance

Novel Design and Control of a Crank-Slider Series Elastic Actuated Knee Exoskeleton for Compliant Human-Robot Interaction

A Lightweight Ankle Exoskeleton Amplifying Input Power to Create High Power Assistance

Design of a Purely Mechanical Sensor-Controller Integrated System for Walking Assistance on an Ankle-Foot Exoskeleton

Comfort-Centered Design of a Lightweight and Backdrivable Knee Exoskeleton