Abstract:Recent research has demonstrated the benefits of hip exoskeletons for human movement assistance in lab settings with the improved metabolic economy and gait kinematics, but its adoption in community settings has been restricted by factors like the device mass and its torque capabilities. This paper presents the design of a lightweight and high-torque hip exoskeleton with quasi-direct-drive actuation using compact and high torque density motors. The portable hip exoskeleton including battery weighs 3.4 kg and can generate 45 Nm peak torque. Unlike conventional actuation method using high speed and low torque motor with high gear ratio transmission, our hip exoskeleton uses a quasi-direct drive actuation paradigm with high torque density motor and 8:1 low gear ratio transmission to achieve high backdrivability (0.4 Nm) and high control bandwidth (62.4 Hz) which provides physical intelligence (e.g. high backdrivability and high bandwidth) without active control for versatile applications in real-world environments. Introduction Recent research has demonstrated the benefits of hip exoskeletons for human movement assistance in lab settings with an improved metabolic economy and gait kinematics [13]. The widespread adoption of the devices in community settings has been restricted by factors like the device mass and its torque capabilities. In general, the performance is restricted by the trade-off between the device mass and output torque ability. In addition to fully-integration and lightweight design of the wearable structure and electronics, motor performance and mechanical design of the robot have a major impact on the device output torque density. One classic design solution to achieve high device torque density is to use a high gear ratio transmission with a high-speed and lowtorque motor. Due to the large gear ratio transmission, the actuator output has large rotor inertia and significantly reduces backdrivability of the robot. The series elastic actuation (SEA) paradigm overcomes the backdrivability limitation but also sacrifices control bandwidth and causes excessive weight. To achieve device high torque density and maintain high backdrivability, this paper presents a hip exoskeleton design solution that is based quasi-direct drive actuation. The actuator consists of a customized high torque density motor, a low gear ratio transmission and low-power electronics. The actuator weights 777 g and has high output peak torque density (58 Nm/kg), high backdrivability (0.4 Nm back drive torque in 2 Hz test), and high control bandwidth (62.4 Hz). Results and Discussion This paper presents a lightweight hip exoskeleton using compact quasi-direct drive actuator. It provides 45 Nm peak torque can achieve 13.2 Nm/kg high torque density. It also has low impedance and high backdrivability performance to make the system intrinsically safe. Table 1 shows our design specification and comparison with benchmarked hip exoskeletons. The hip exoskeleton has potential as a personal mobility assistance device to support independent living and we will conduct experiments to evaluate its performance in community settings. TABLE. 1 HIP EXOSKELETON SPECIFICATION AND COMPARISON Parameters [1] [2] [3] This work Degree of Freedom Ext Flex/Ext Flex/Ext Flex/Ext Peak Torque (Nm) 32 60 12 45 Mass (kg) 5 7 2.5 3.4 Torque Density (Nm/kg) 6.4 8.6 4.8 13.2 The designed exoskeleton is versatile in terms of high bandwidth and high backdrivability thanks to its high torque density quasi-direct drive actuation. Fig. 1 shows the control bandwidth test result. The control test with 22% of biological hip joint movement during walking and squatting was performed to investigate the tracking performance. An ablebodied adult subject (26-year-old, male, 70 kg) wore the hip exoskeleton and walked on a treadmill with the speed varying from 0.8 to 1.4 m/s and squatted on the ground with 2 s cadence. As shown in Fig. 2, the average RMS error between the desired and actual torque trajectory in 60 tests is 1.09 Nm (5.4% error of the maximum desired torque). The results indicate that the torque controller can follow the torque profile with high accuracy to assist human walking and squatting. Fig. 1 The Bode plot of the 10 Nm, 15 Nm, and 20 Nm torque control. The bandwidth is 62.4 Hz. Fig. 2 Torque tracking performance of ±20 Nm assistance during walking and squatting tests. The mean of actual assistive torque (red) tracked the desired torque (black dash) well.

Modeling and Stiffness-Based Continuous Torque Control of Lightweight Quasi-Direct-Drive Knee Exoskeletons for Versatile Walking Assistance

Design and Evaluation of Torque Compensation Controllers for a Lower Extremity Exoskeleton

Lightweight and High Torque Hybrid Soft Exoskeletons for Walking and Squatting Assistance

Lightweight, Backdrivable, and High-Bandwidth Knee Exoskeleton with Quasi-Direct Drive Actuation

Design and Control of a Quasi-Direct Drive Soft Exoskeleton for Knee Injury Prevention during Squatting

Optimized Impedance Control of a Lightweight Gait Rehabilitation Exoskeleton Based on Accurate Knee Joint Torque Estimation

Optimization of Torque-Control Model for Quasi-Direct-Drive Knee Exoskeleton Robots Based on Regression Forecasting

Closed-Loop Torque and Kinematic Control of a Hybrid Lower-Limb Exoskeleton for Treadmill Walking

Actuator optimization and deep learning-based control of pediatric knee exoskeleton for community-based mobility assistance

Cascade Force Control of Lower Limb Hydraulic Exoskeleton for Human Performance Augmentation

Design and Control of a Quasi-Direct Drive Soft Hybrid Knee Exoskeleton for Injury Prevention During Squatting.

A Lightweight and High Torque Hip Exoskeleton with Quasi-Direct Drive Actuation for Independent Living Assistance

Design And Control Of A High-Torque And Highly Backdrivable Hybrid Soft Exoskeleton For Knee Injury Prevention During Squatting

Quasi-Direct Drive Actuation for a Lightweight Hip Exoskeleton with High Backdrivability and High Bandwidth

Haptic Transparency and Interaction Force Control for a Lower Limb Exoskeleton

Haptic Transparency and Interaction Force Control for a Lower-Limb Exoskeleton

The Control System for Flexible Hip Assistive Exoskeleton

A Novel Control for Gait Assistance and Resistance with a Robotic Hip Exoskeleton Using Compact Soft Force Sensors

Development of a hierarchical control strategy for a soft knee exoskeleton based on wearable multi-sensor system

Continuous Finite-Time Torque Control for Flexible Assistance Exoskeleton with Delay Variation Input

Neuromechanical model-based adaptive control of bi-lateral ankle exoskeletons: biological joint torque and electromyogram reduction across walking conditions