Abstract:The choice of torque curve in lower-limb enhanced exoskeleton robots is a key problem in the control of lower-limb exoskeleton robots. As a human–machine coupled system, mapping from sensor data to joint torque is complex and non-linear, making it difficult to accurately model using mathematical tools. In this research study, the knee torque data of an exoskeleton robot climbing up stairs were obtained using an optical motion-capture system and three-dimensional force-measuring tables, and the inertial measurement unit (IMU) data of the lower limbs of the exoskeleton robot were simultaneously collected. Nonlinear approximations can be learned using machine learning methods. In this research study, a multivariate network model combining CNN and LSTM was used for nonlinear regression forecasting, and a knee joint torque-control model was obtained. Due to delays in mechanical transmission, communication, and the bottom controller, the actual torque curve will lag behind the theoretical curve. In order to compensate for these delays, different time shifts of the torque curve were carried out in the model-training stage to produce different control models. The above model was applied to a lightweight knee exoskeleton robot. The performance of the exoskeleton robot was evaluated using surface electromyography (sEMG) experiments, and the effects of different time-shifting parameters on the performance were compared. During testing, the sEMG activity of the rectus femoris (RF) decreased by 20.87%, while the sEMG activity of the vastus medialis (VM) increased by 17.45%. The experimental results verify the effectiveness of this control model in assisting knee joints in climbing up stairs.

What problem does this paper attempt to address?

The paper aims to address the critical issue of torque curve selection in lower limb exoskeleton robots. Specifically, the paper focuses on optimizing the knee joint torque control model when the exoskeleton robot is climbing stairs. Since the exoskeleton robot is a human-machine coupled system, the mapping from sensor data to joint torque is complex and nonlinear, making it difficult to model accurately with mathematical tools. To compensate for delays in mechanical transmission, communication, and the underlying controller, the researchers performed varying degrees of time shift processing on the knee joint torque data of the exoskeleton robot during the model training phase, resulting in different control models. The main work of the paper includes: 1. Using an optical motion capture system and a 3D force measurement platform to obtain knee joint torque data of 5 subjects during stair climbing, while simultaneously collecting inertial measurement unit (IMU) data of the exoskeleton robot's lower limbs. 2. Designing a regression prediction network that combines Convolutional Neural Network (CNN) and Long Short-Term Memory (LSTM) network, with IMU data as input and knee joint torque as output. 3. To compensate for various delays, performing time shift processing on the knee joint torque data, generating multiple torque control models during the model training phase. 4. Proposing a model optimization metric to evaluate the auxiliary effect of the exoskeleton robot torque control model by the degree of overlap between the ideal curve and the actual motor output curve. 5. Verifying the effectiveness of the control model through surface electromyography (sEMG) experiments, with results showing a 20.87% reduction in sEMG activity of the rectus femoris (RF) and a 17.45% increase in sEMG activity of the vastus medialis (VM).

Optimization of Torque-Control Model for Quasi-Direct-Drive Knee Exoskeleton Robots Based on Regression Forecasting

Design and Evaluation of Torque Compensation Controllers for a Lower Extremity Exoskeleton

Modeling and Stiffness-Based Continuous Torque Control of Lightweight Quasi-Direct-Drive Knee Exoskeletons for Versatile Walking Assistance

A Realistic Model Reference Computed Torque Control Strategy for Human Lower Limb Exoskeletons

Non-linear Sliding Mode Control of the Lower Extremity Exoskeleton Based on Human–robot Cooperation

Neural Network Robust Control Based on Computed Torque for Lower Limb Exoskeleton

Artificial neural network-based control of powered knee exoskeletons for lifting tasks: design and experimental validation

Development of a model reference computed torque controller for a human lower extremity exoskeleton robot

Closed-Loop Torque and Kinematic Control of a Hybrid Lower-Limb Exoskeleton for Treadmill Walking

Design and Control of a Quasi-Direct Drive Soft Exoskeleton for Knee Injury Prevention during Squatting

Knee Exoskeleton Assistive Torque Control Based on Real-Time Gait Event Detection

A Differentiable Dynamic Model for Musculoskeletal Simulation and Exoskeleton Control

An Energy-Efficient Torque Controller Based On Passive Dynamics Of Human Locomotion For A Robotic Transtibial Prosthesis

Actuator optimization and deep learning-based control of pediatric knee exoskeleton for community-based mobility assistance

Closing the Loop on Exoskeleton Motor Controllers: Benefits of Regression-Based Open-Loop Control

Development of a hierarchical control strategy for a soft knee exoskeleton based on wearable multi-sensor system

Adaptive Neural Network Control for a Lower-Limb Exoskeleton Using Variable Stiffness Transferring

Design and analysis of a lower limb assistive exoskeleton robot

A Tube-Based Model Predictive Control Method to Regulate a Knee Joint With Functional Electrical Stimulation and Electric Motor Assist

Lower Limb Torque Prediction for Sit-To-Walk Strategies Using Long Short-Term Memory Neural Networks

Model Identification and Human-robot Coupling Control of Lower Limb Exoskeleton with Biogeography-based Learning Particle Swarm Optimization