Abstract:Powered exoskeletons have demonstrated great potential both for ambulation restoration in people with gait impairments and for walking augmentation in healthy individuals. However, their diffusion for mobile applications is still limited, because state-of-the-art portable powered exoskeletons are not only excessively heavy and bulky but also typically obtrusive to human movements, causing both discomfort and fall risk. This paper presents the design of a lightweight and high-torque knee exoskeleton for versatile applications in real-world environments. It weighs 2.5 kg including a battery and is able to generate a 20 Nm nominal torque. Unlike conventional actuation methods that rely on high speed, low torque motors coupled to high gear ratio transmissions, our knee exoskeleton takes advantage of a quasi-direct drive actuation paradigm based on high torque density motor and 6:1 low gear ratio transmission. This actuation paradigm enables wearable robots with high backdrivability (0.4 Nm back-drive torque) and high bandwidth (40 Hz) for versatile applications. Introduction As wearable devices, exoskeletons should impose no restrictions on human movements. For this purpose, the key features of high-performance wearable robots are high backdrivability and high control bandwidth [1]. Backdrivability represents a measure of the mechanical impedance between the exoskeleton and its wearer. To enhance the responsiveness of the device to human intentions, it is crucial to minimize its resistance to the user during physical human-machine interaction [2]. On the other side, high control bandwidth of wearable robots is critical for human safety, as most exoskeletons designed for assistance during walking (relatively slow movement at 1-2 Hz frequency) are incapable of handling unexpected movements (e.g., human tripping). From the design perspective, the mechanical system of powered exoskeletons is comprised of motors, transmission mechanisms, and wearable structures [3]. Since motors and transmission mechanism predominantly determines backdrivability and control bandwidth of an exoskeleton, our approach focuses on them. Methods To address the challenges of excessive mass and restriction of natural movement, we present a unilateral knee exoskeleton design that satisfies the range of motion of the daily human movement, from 0 to 160 degrees, and also presents the advantages of rigid exoskeletons, related to high torque capabilities. The system is based on a quasi-direct drive actuator aligned with the knee joint of the human body. A thigh and shank braces were used to connect the wearable structure to the lower limb of the user, while a backpackmounted at the waist host the control components. The total weight of the device including a battery pack is 2.5 kg. Fig. 1 shows the overview of the knee exoskeleton and its detail specifications. Fig. 1 (Left) Proposed portable hybrid soft exoskeleton. (Right) Device specifications. Results and Discussion This paper presents a lightweight knee exoskeleton for personal mobility assistance. The designed exoskeleton is versatile and presents high backdrivability thanks to its high torque density quasi-direct drive actuation. Fig. 2 shows the backdrivability evaluation results, while in Fig. 3 the torque tracking performance is reported for different levels of assistance.

A versatile knee exoskeleton mitigates quadriceps fatigue in lifting, lowering, and carrying tasks

Design And Control Of A High-Torque And Highly Backdrivable Hybrid Soft Exoskeleton For Knee Injury Prevention During Squatting

Design and Control of a Quasi-Direct Drive Soft Exoskeleton for Knee Injury Prevention during Squatting

Enhancing Voluntary Motion With Modular, Backdrivable, Powered Hip and Knee Orthoses

Design and Control of a Quasi-Direct Drive Soft Hybrid Knee Exoskeleton for Injury Prevention During Squatting.

Lightweight, Backdrivable, and High-Bandwidth Knee Exoskeleton with Quasi-Direct Drive Actuation

Lockable Lower Limb Exoskeleton Based on a Novel Variable-Stiffness Joint: Reducing Physical Fatigue at Squatting

Modeling and Stiffness-Based Continuous Torque Control of Lightweight Quasi-Direct-Drive Knee Exoskeletons for Versatile Walking Assistance

Comfort-Centered Design of a Lightweight and Backdrivable Knee Exoskeleton

Ergonomic dual four-bar linkage knee exoskeleton for stair ascent assistance

Design and Evaluation of Torque Compensation Controllers for a Lower Extremity Exoskeleton

Bio-inspired design of a self-aligning, lightweight, and highly-compliant cable-driven knee exoskeleton

A Hybrid Knee Exoskeleton Using Real-Time Ultrasound-Based Muscle Fatigue Assessment

A Time Division Multiplexing Inspired Lightweight Soft Exoskeleton for Hip and Ankle Joint Assistance

A Semi-active Exoskeleton Based on EMGs Reduces Muscle Fatigue When Squatting

A Hip Active Assisted Exoskeleton That Assists the Semi-Squat Lifting

Wearable Knee Assistive Devices for Kneeling Tasks in Construction

Personal Mobility With Synchronous Trunk-Knee Passive Exoskeleton: Optimizing Human-Robot Energy Transfer

Optimally Biomimetic Passivity-Based Control of a Lower-Limb Exoskeleton Over the Primary Activities of Daily Life

Human-in-the-Loop Optimization of Knee Exoskeleton Assistance for Minimizing User's Metabolic and Muscular Effort

A Low-Back Exoskeleton Can Reduce the Erector Spinae Muscles Activity During Freestyle Symmetrical Load Lifting Tasks