Abstract:In this study, the amorphous C, ZrB2 and BN single-layer coatings as well as C/BN, C/ZrB2, ZrB2/BN and C/ZrB2/BN composite-coatings were prepared on SiCf by an in-situ synthesis and solution impregnation-pyrolysis method. Subsequently, SiCf/SiBCN composites were fabricated by hot-pressing sintering at 1900 ℃/60 MPa/30 min to explore the influence of different coatings on the microstructure and mechanical performance of resulting composites. After preparation of single-layer coated SiCf, the SiCf(BN) or SiCf(ZrB2) tended to be overlapped with each other, while the dispersion of amorphous C coated SiCf was satisfying. Besides, some uneven areas and attached particles have appeared on fiber surfaces of the SiCf(BN) or SiCf(ZrB2), whereas smooth and dense surfaces of amorphous C coated SiCf were observed. Since the uniformity of ZrB2 coatings can be partially damaged by the subsequent coating process of BN, the composite-coatings of ZrB2/BN and C/ZrB2/BN were thereby not suitable for strengthening SiBCN matrix. The SiCf/SiBCN composites with C/ZrB2 coatings have desirable comprehensive mechanical properties. Nevertheless, the conventional toughening mechanisms like fiber pull-out and bridging, and crack deflection are not available for these composites since the serious crystallization of SiCf leading to great strength loss, resulting in catastrophic brittle fracture.

Preparation and Interface Modification of Si3N4f/SiO2 Composites

Optimization of Microstructure to Improve Si3n4 Ceramics with Thermal Conductivity and Mechanical Properties: Effect of Si and Α-Si3n4 Powder Composition

Study on the fiber/matrix interface modification of Si3N4 f/SiO2 composites with polymer derived double-layer coatings

Mechanical properties and strengthening mechanism of SiCf/SiC mini-composites modified by SiC nanowires

Preparation and mechanical behaviors of multiscale SiC nanowires/carbon fiber reinforced silicon oxycarbide ceramic composites

Fabrication and Properties of SiO2-BN-Si3N4 Composites

Effect of Surface Treatment of Carbon Fiber on the Mechanical Properties of C-f/SiO2 Composite

SiC and ZrN Nano-Particulate Reinforced AlON Composites: Preparation, Mechanical Properties and Toughening Mechanisms

Effects of in situ formed nanostructures on the structure and properties of C/SiOC composites

Surface Modification of Nano-Al2O3 with Silane Coupling Agent and Its Effect on the Compressive Strength of PI/Al2O3 Composites

Interfacial properties of SiCf/SiC minicomposites with a scheelite coating

Synthesis of coatings on SiC fibers and their effects on microstructure and mechanical properties of SiC f /SiBCN composites

Preparation, Properties and Applications of Nanocomposites

Interfacial Reactions and Mechanical Properties Studies of C-Coated and C/B4C Duplex-Coated SiC Fiber-Reinforced Ti2AlNb Composites

Microstructure and mechanical properties of SiC-Al2O3 nanocomposite prepared by surface modified SiC nanopowders

Mechanical and thermal shock properties of C f /SiBCN composite: Effect of sintering densification and fiber coating

Largely enhanced mechanical and dielectric properties of paper-based composites via in situ modification of polyimide fibers with SiO2 nanoparticles

Feasibility study of ZrSiO4 as matrix and fiber interphase of SiC/SiC composite

In-situ SiC nanowires reinforced SiC-based multicomponent ceramic coating for protecting SiOC/CF composites

Simultaneous improvement of interfacial bonding and thermal resistance of carbonaceous fiber/silicone composite coatings modified with aniline-methyl-triethoxysilane

Mechanical properties and wear resistance of Cf / epoxy resin composites with in-situ grown SiC nanowires on carbon fibers