Abstract:The DPF regeneration is crucial for reducing backpressure, minimizing negative impacts on engine power and fuel economy, but the changes in particulate emission characteristics it brings are worth studying. In this study, the influence of DPFs with different soot loadings on exhaust back pressure and particle emission characteristics, as well as the particle number emission, particle size distribution, and thermal field distribution characteristics during regeneration was investigated based on engine bench test. Results reveal that the exhaust back pressure increases linearly with the engine speed, as well as the soot loading. The increase of DPF soot loading leads to a considerable increase in the reduction efficiency of particle number (PN) and particulate matter emissions, especially for the accumulation mode particles. Moreover, the performance in reducing nucleation mode particles is markedly better than that of accumulation mode ones, and this effect is greatly influenced by the engine operating conditions. At the beginning of DPF regeneration, the PN concentration increases sharply, especially the nucleation mode particles. After regeneration, the PN emissions decrease by two orders of magnitude. During regeneration, the particle size distribution exhibits a unimodal distribution, with the peak value increasing considerably and shifting toward smaller particle sizes. After regeneration, the particle size of the PN peak value slightly decreases and markedly shifts toward larger sizes, the accumulation mode particle concentration increases by 7.2 times, and the nucleation mode particle concentration increases by 2.6 times. Before the DPF regeneration, the axial temperature gradually decreases along the direction of the airflow, and the radial temperature gradually decreases from the center to the edge. During regeneration, the highest temperature occurs in the center of the DPF cross-section, whereas the temperature peak at the outlet interface occurs at the middle position of the DPF. The findings of this paper can provide scientific references to formulation and optimization of DPF regeneration strategies.

Effects Analysis on Optimal Microwave Energy Consumption in the Heating Process of Composite Regeneration for the Diesel Particulate Filter

Multiobjective Optimization of Diesel Particulate Filter Regeneration Conditions Based on Machine Learning Combined with Intelligent Algorithms

Analysis of Regeneration Condition of Diesel Exhaust Particulate Filter

Optimization of Liquid Desiccant Regenerator with Multiobject Particle Swarm Optimization Algorithm

The enhancement mechanism of the microwave-assisted toluene desorption for activated carbon regeneration based on the constructive interference

Study of the Influence of Methanol/f-T Diesel Combustion Particle Materiality Parameters on the Deposition Process in Diesel Particulate Filter Trap Units

Study on Burner Type Diesel Particulate Filter System Using Compressed Air from Turbocharger

Optimization of microwave heating thickness for spent automobile catalyst

Effect of regeneration method and ash deposition on diesel particulate filter performance: a review

Study on Characteristics and Control Strategy of Diesel Particulate Filters Based on Engine Bench

Micro-wave Heating Regeneration Technology for Exhaust Gas Cleaning Device in Diesel Engine

A Review of Thermal Energy Management of Diesel Exhaust after-Treatment Systems Technology and Efficiency Enhancement Approaches

Filtration Efficiency and Regeneration Behavior in a Catalytic Diesel Particulate Filter with the Use of Diesel/Polyoxymethylene Dimethyl Ether Mixture

Numerical Simulation of Diesel Particulate Filter Regeneration Considering Ash Deposit

Multi-channel Simulation of the Regeneration of Diesel Particulate Filters

Particle filter performance of soot-loaded diesel particulate filter and the effect of its regeneration on the particle number and size distribution

Influence of Incoming Flow Conditions on DPF Thermal Regeneration

An experimental investigation of particulate emission characteristics of catalytic diesel particulate filters during passive regeneration

Microwave thermal regeneration characteristics of spent activated carbon based on a coupled electromagnetic, heat and mass transfer multiphase porous media model

Effect of Temperature-controlled conditions on the decomposition of particulate matter deposited in the diesel particulate filter channel by treatment with Non-thermal plasma

Effects analysis on soot combustion performance enhancement of an improved catalytic gasoline particulate filter regeneration system with electric heating