Abstract:Using dynamic compression technique, the equation of state for Fe-8.6 wt% Si was measured up to 240 GPa and 4,670 K. A least squares fit to the experimental data yields the Hugoniot parameters C-0 = 4.6030.101 km/s and lambda = 1.5050.037 with initial density rho(0)=7.3860.021 g/cm(3). Based on the Hugoniot data, the calculated isothermal equation of state is consistent with static compression data when the lattice Gruneisen parameter gamma(l) =1.65(7.578/rho) and electronic Gruneisen parameter gamma(e)=1.83. The calculated pressure-density data at 300 K were fitted to a third-order Birch-Murnaghan equation of state with zero pressure the parameters K-0=192.16.3 GPa, K0'=4.710.27 with fixed rho(0 epsilon) =7.578 +/- 0.050 g/cm(3). Under the conditions of Earth's core, the densities of Fe-8.6 +/- 2.0 wt% Si and Fe-3.8 +/- 2.9 wt% Si agree with preliminary reference Earth mode (PREM) data of the outer and the inner core, respectively. These are the upper limits for Si in the core assuming Si is the only light element. Simultaneously considering the geophysical and geochemical constraints for a Si-S-bearing core, the outer core may contain 3.8 +/- 2.9 wt% Si and 5.6 +/- 3.0 wt% S. Plain Language Summary Silicon (Si) may be a dominant light element in the core, and precise evaluation of its amount requires accurate thermal equation of state of Fe-Si alloy. Here we present the Hugoniot data for Fe-8.6 wt% Si, measured up to 240 GPa with two-stage light gas gun. The experimental data allow us to establish reliable thermal equation of state of Fe-Si alloy over a wide pressure-temperature range and to constrain the composition of the core. The results indicate that the densities of Fe-8.6 wt% Si and Fe-3.8 wt% Si agree with the observed density profiles of the outer core and the inner core, respectively. Our model prefers an Fe-Si-S core that contains about 3.8 +/- 2.9 wt% Si and 5.6 +/- 3.0 wt% S in the outer core.

Equation of State for Shocked Fe‐8.6 Wt% Si Up to 240 GPa and 4,670 K

Equation of state and phase diagram of Fe–16Si alloy as a candidate component of Earth's core

Hydrostatic Compression of Fe-Si Alloy

Hydrogen and Silicon Effects on Hexagonal Close Packed Fe Alloys at High Pressures: Implications for the Composition of Earth's Inner Core

Equation of State for Shocked Fe-8.6 Wt % Si Up to 240 GPa and 4670 K

Measurements of Sound Velocity of Liquid Fe‐11.8 Wt % S Up to 211.4 GPa and 6,150 K

Multi-Technique Equation of State for Fe2sio4 Melt and the Density of Fe-Bearing Silicate Melts from 0 to 161 Gpa

Shock compression of Fe-FeS mixture up to 204 GPa

High-pressure behavior of the Fe-S system and composition of the Earth's inner core

Sound Velocities and Density Measurements of Solid Hcp-Fe and Hcp-Fe–si (9 Wt.%) Alloy at High Pressure: Constraints on the Si Abundance in the Earth's Inner Core

High Silicon Self-Diffusion Coefficient in Dry Forsterite

Shock Compression of Fe‐FeS Mixture Up to 204 GPa

Electronic properties and compressional behavior of Fe–Si alloys at high pressure

Sound Velocities Of Fe And Fe-Si Alloy In The Earth'S Core

Sound velocity measurements of hcp Fe-Si alloy at high pressure and high temperature by inelastic X-ray scattering

Closure of the Fe–S–Si Liquid Miscibility Gap at High Pressure

Electrical resistivity of hcp Fe-Si alloy at high pressure and temperature

Equation of State, Phase Stability of (mg0.92, Fe0.08)SiO3 Perovskite from Shock Wave Study and Its Geophysical Implications

Melting phase relations in Fe-Si-H at high pressure: Implications for Earth’s inner core crystallization and core light elements

Fe-FeH Eutectic Melting Curve and the Estimates of Earth's Core Temperature and Composition

Density and sound velocity of liquid Fe-S alloys at Earth’s outer core P-T conditions