Abstract:Using dynamic compression technique, the equation of state for Fe-8.6 wt% Si was measured up to 240 GPa and 4,670 K. A least squares fit to the experimental data yields the Hugoniot parameters C-0 = 4.6030.101 km/s and lambda = 1.5050.037 with initial density rho(0)=7.3860.021 g/cm(3). Based on the Hugoniot data, the calculated isothermal equation of state is consistent with static compression data when the lattice Gruneisen parameter gamma(l) =1.65(7.578/rho) and electronic Gruneisen parameter gamma(e)=1.83. The calculated pressure-density data at 300 K were fitted to a third-order Birch-Murnaghan equation of state with zero pressure the parameters K-0=192.16.3 GPa, K0'=4.710.27 with fixed rho(0 epsilon) =7.578 +/- 0.050 g/cm(3). Under the conditions of Earth's core, the densities of Fe-8.6 +/- 2.0 wt% Si and Fe-3.8 +/- 2.9 wt% Si agree with preliminary reference Earth mode (PREM) data of the outer and the inner core, respectively. These are the upper limits for Si in the core assuming Si is the only light element. Simultaneously considering the geophysical and geochemical constraints for a Si-S-bearing core, the outer core may contain 3.8 +/- 2.9 wt% Si and 5.6 +/- 3.0 wt% S. Plain Language Summary Silicon (Si) may be a dominant light element in the core, and precise evaluation of its amount requires accurate thermal equation of state of Fe-Si alloy. Here we present the Hugoniot data for Fe-8.6 wt% Si, measured up to 240 GPa with two-stage light gas gun. The experimental data allow us to establish reliable thermal equation of state of Fe-Si alloy over a wide pressure-temperature range and to constrain the composition of the core. The results indicate that the densities of Fe-8.6 wt% Si and Fe-3.8 wt% Si agree with the observed density profiles of the outer core and the inner core, respectively. Our model prefers an Fe-Si-S core that contains about 3.8 +/- 2.9 wt% Si and 5.6 +/- 3.0 wt% S in the outer core.

Shock Compression of Fe‐FeS Mixture Up to 204 GPa

Shock compression of Fe-FeS mixture up to 204 GPa

Measurements of Sound Velocity of Liquid Fe‐11.8 Wt % S Up to 211.4 GPa and 6,150 K

Equation of State for Shocked Fe‐8.6 Wt% Si Up to 240 GPa and 4,670 K

Laser-driven shock compression and equation of state of Fe$_2$O$_3$ up to 700 GPa

High-Pressure Iron-Sulfur Compound, Fe3S2, and Melting Relations in the Fe-FeS System

High-Pressure Iron-Sulfur Compound, Fe <sub>3</sub> S <sub>2</sub> , and Melting Relations in the Fe-FeS System

Phase Stability and Thermal Equation of State of Iron Carbide Fe3C to 245 GPa

Measurement of Multiple Physical Parameters of Dense Gaseous Hydrogen-Deuterium Mixture under Double-Shock Compression: Evaluating Theoretical Models from Multiple Views

Structure Type and Bulk Modulus of Fe3S, a New Iron-Sulfur Compound

Equation of State for Shocked Fe-8.6 Wt % Si Up to 240 GPa and 4670 K

Shock-driven amorphization and melt in Fe$_2$O$_3$

Ramp compression of iron to 273 GPa

High-Pressure Behavior of Iron Sulfide

Density and sound velocity of liquid Fe-S alloys at Earth’s outer core P-T conditions

Multi-Technique Equation of State for Fe2sio4 Melt and the Density of Fe-Bearing Silicate Melts from 0 to 161 Gpa

Hydrostatic Compression of Fe-Si Alloy

Effect of Hydrogen on the Melting Temperature of Fe–FeS System at High Pressure

Sulfur in the Earth’s Inner Core

Static Compression of Iron to 300 Gpa and Fe0.8ni0.2 Alloy to 260 Gpa - Implications for Composition of the Core

ε-Fe Electrical Resistivity at High Pressures of Stepwise Shock Compression