Abstract:Phase relations in the system MgSiO3-Al2O3 were investigated at pressures of 27-45GPa and temperatures of 1700, 2000, and 2300K using sintered diamond and tungsten carbide anvils in a multianvil apparatus. The bulk compositions in the MgSiO3-Al2O3 binary system crystallize a phase assemblage of pyrope and corundum at pressures below 27GPa and an assemblage of bridgmanite and corundum at pressures above 27GPa regardless of temperatures. The solubility of Al2O3 in bridgmanite and that of MgSiO3 in corundum increases significantly with increasing temperature. The solubility of Al2O3 in bridgmanite increases from 6.7mol% at 1700K to 21.8mol% at 2500K under a constant pressure of 27GPa. Bridgmanite becomes more aluminous with increasing pressure from 27 to 45GPa at a given temperature. The MgSiO3 content in corundum increases with increasing pressure at pressure lower than 27GPa, while it decreases at pressure higher than 27GPa. Our results suggest that bridgmanite can incorporate a considerably higher Al2O3 content than that of the pyrope composition (25mol% Al2O3). The present study further suggests that the entire Al2O3 component is accommodated into bridgmanite in the pyrolite lower mantle. However, Al2O3 cannot be fully accommodated into bridgmanite in the coldest parts of subducted slabs in the shallow part of the lower mantle, and therefore, additional phases such as MgAl2O4 with calcium ferrite-type structure are necessary to host the excess Al2O3.Plain Language Summary Here we determined the phase relations in the system MgSiO3-Al2O3 up to 2300K under lower mantle pressures and found that the solubility of Al2O3 in bridgmanite and that of MgSiO3 in corundum increase with increasing temperature. All Al2O3 can be completely accommodated into bridgmanite in the pyrolite composition, while the Al2O3 cannot be fully accommodated into bridgmanite in the coldest parts of subducted slabs, and therefore, additional phases are required to host the excess Al2O3.

Closure of the Fe–S–Si Liquid Miscibility Gap at High Pressure

Phase Relations in the System MgSiO3‐Al2O3 Up to 2300 K at Lower Mantle Pressures

Determination of Phase Relations of the Olivine–ahrensite Transition in the Mg2SiO4–Fe2SiO4 System at 1740 K Using Modern Multi-Anvil Techniques

Physical Properties of Liquid Fe Alloys at High Pressure and Their Bearings on the Nature of Metallic Planetary Cores

Hydrostatic Compression of Fe-Si Alloy

Multi-Technique Equation of State for Fe2sio4 Melt and the Density of Fe-Bearing Silicate Melts from 0 to 161 Gpa

Free energies of Fe‐O‐Si ternary liquids at high temperatures and pressures: Implications for the evolution of the Earth's core composition

Equation of state and phase diagram of Fe–16Si alloy as a candidate component of Earth's core

C- and S-rich Molten Alloy Immiscibility and Core Formation of Planetesimals

Effect of Ni on Fe–FeS Phase Relations at High Pressure and High Temperature

Equation of State for Shocked Fe‐8.6 Wt% Si Up to 240 GPa and 4,670 K

First‐Principles Study of Thermodynamics and Spin Transition in FeSiO3 Liquid at High Pressure

Effect of Si on liquid Fe compressibility: Implications for sound velocity in core materials

High-pressure Experimental Constraints of Partitioning Behavior of Si and S at the Mercury's Inner Core Boundary

Melting phase relations in Fe-Si-H at high pressure: Implications for Earth’s inner core crystallization and core light elements

Hydrogen and Silicon Effects on Hexagonal Close Packed Fe Alloys at High Pressures: Implications for the Composition of Earth's Inner Core

Phase Stabilities And Spin Transitions Of Fe-3(S1-Xpx) At High Pressure And Its Implications In Meteorites

Electronic properties and compressional behavior of Fe–Si alloys at high pressure

High-pressure behavior of the Fe-S system and composition of the Earth's inner core

Measurements of Sound Velocity of Liquid Fe‐11.8 Wt % S Up to 211.4 GPa and 6,150 K

High-Pressure Iron-Sulfur Compound, Fe3S2, and Melting Relations in the Fe-FeS System