Abstract:Shape memory alloys based on the Ni–Ti system derive their versatile properties from the non-stoichiometric intermetallic compound NiTi. The transformation temperature associated with its shape memory effect is dependent on composition, which can be controlled by minor additions of a third element like iron. This work considers the formation of various intermetallic compounds and the evolution of phases during the sintering of ternary Ni–Ti–Fe powder compacts. Elemental powder mixtures of nickel, titanium and iron were prepared by adding 0–20 at.% Fe to equiatomic Ni–Ti. The powders were compacted into discs and sintered by heating to 1200 °C in a differential scanning calorimeter. In separate experiments, heating was interrupted to identify the phases present in the partially sintered samples at various temperatures. The microstructures of the sintered samples were characterized using scanning electron microscopy. The distribution of nickel, titanium and iron in the samples was studied with EDS mapping and the phases present were identified using XRD. In the equiatomic Ni–Ti powder compact, NiTi 2 , NiTi and Ni 3 Ti were formed in the solid state (< 942 °C) through diffusion. At 942 °C a strong reaction between the remaining titanium and NiTi 2 takes place, leading to the formation of a liquid. At 1120 °C, NiTi and Ni 3 Ti combine to form a liquid. These reactions are affected by the addition of iron to the powder mixture. The results show that at 20 at.% iron in the ternary compact, the first reaction occurred at 999 °C, instead of 942 °C for the binary composition and iron did not form any compound with nickel or titanium. Instead, the iron could replace nickel in NiTi 2 and in NiTi, forming (Fe, Ni)Ti 2 and (Fe,Ni)Ti. This leads to more Ni 3 Ti formation and explains why the reaction at 1120 °C is more prominent at high iron contents. A linear dependence on the iron content in the sample was also observed for the onset temperatures for two split exothermic peaks in the DSC curves. The results also suggest that the temperatures associated with the β-Ti + (Fe, Ni)Ti 2 → L and (Fe, Ni)Ti 2 → (Fe,Ni)Ti + L reactions depend on the ratio of iron to nickel in (Fe, Ni)Ti 2 .

Effect of Ni on Fe–FeS Phase Relations at High Pressure and High Temperature

Phase Equilibria of the Al–Fe–Ni System at 850 °C and 627 °C

Phase Equilibria of the Fe–Ni–Si System at 850°C

Phase Equilibria Of The Fe-Ni-Si System At 850 Degrees C

Experimental Investigation of Phase Equilibria in the Ni–Fe–Zr Ternary System

High-Pressure Monosulfide Solid Solution FexNi1−xS Phases: X-Ray Diffraction Analysis and Raman Spectroscopy

Solidification Structure Formation in Undercooled Fe–Ni Alloy

Shock temperatures and melting curve of an Fe-Ni-Cr alloy up to 304 GPa

High-Pressure Behavior of Iron Sulfide

Closure of the Fe–S–Si Liquid Miscibility Gap at High Pressure

Structure and Non‐Ideal Mixing of Fe‐Ni‐S Liquid at High Temperature and Pressure and Its Implication for the Earth's Outer Core Composition

Shock Compression and Melting of an Fe‐Ni‐Si Alloy: Implications for the Temperature Profile of the Earth's Core and the Heat Flux Across the Core‐Mantle Boundary

Electrical Resistivity and Phase Evolution of Fe–N Binary System at High Pressure and High Temperature

Effect of Hydrogen on the Melting Temperature of Fe–FeS System at High Pressure

Sintering studies on Ni–Ti–Fe elemental powder mixtures using differential scanning calorimetry

Phase Equilibria in the Ni-Sn-Zn System at 500°C

Determination of the isothermal sections of the Al-Ni-Si ternary system at 750 °C and 850 °C

The Effect of Nickel Content on Phase Transition Characteristics of Ni-rich Fe-Ni Elastocaloric Refrigeration Alloys

Effect of Ni Addition on the Solidification Process and Microstructure of Al-12%Si-4% Cu-1.2%Mn-x%Ni Heat-Resistant Alloys

Unveiling the effect of Ni on the formation and structure of Earth's inner core

Phase Equilibria in the Ni-Al-Sn Ternary System at 800 and 1000 degrees C