Abstract:INTRODUCTION High resolution diffusion tensor imaging is a desirable technique to improve the depiction of neural anatomy structures. Earlier work has shown that the feasibility of achieving high resolution diffusion tensor imaging using an interleaved variable-density spiral (VDS) [1] readout trajectory and iterative phase correction algorithm (SNAILS technique) [2]. However, this technique requires long acquisition time even for low directional resolution, such as 6 directions. With parallel imaging [3], the acquisition speed can be increased, but higher acceleration factor for parallel imaging introduces amplified noise which then hinders the practical application. CORNOL reconstruction [4] has been proved to be effective in noise suppression and image structure preservation for high acceleration acquisitions. This study combines highly accelerated parallel imaging and VDS for high resolution DTI. Improved CORNOL (iCORNOL) which is tailored for VDS DTI is employed for artifacts suppression. To our knowledge, it is the first time to develop high spatio-temporal resolution DTI on Philips 3T MRI scanner. METHODS An interleaved VDS [1] diffusion weighted sequence was implemented on a Philips 3T clinical scanner (Achieva, Philips, Best, The Netherlands) equipped with a high performance gradient set (60mT/m per gradient axis, slew rate 200mT/m/msec). Brain images were acquired from three healthy volunteers using an 8-channel head coil. Scan parameters were: b = 600 s/mm, FOV = 220 × 220 mm, matrix size = 256 × 256, slice thickness = 5 mm, TR/TE = 2500/80ms, α = 3 (α is the parameter controlling the sampling density), number of interleaves = 24, readout duration for each interleave = 16.9ms (3456 points), acquisition bandwidth = 100 kHz, diffusion encoding directions = 6. All subjects provided informed written consent. For parallel imaging, reduction factor was 4. iCORNOL (refer to our another abstract 4341 for technical details) reconstruction was compared with conjugate gradient SENSE (CG-SENSE)[5]. All reconstruction methods were combined with direct phase subtraction. RESULTS AND DISCUSSIONS The first row in Fig.1 shows b0 image, diffusion weighted image, trace map and FA map from fully sampled data. 2 row in Fig.1 shows results from undersampled data reconstructed by CG-SENSE. With a reduction factor as high as 4, aliasing artifacts are unacceptable. Additionally, CG-SENSE reconstruction introduced significant noise which decreases the accuracy of high resolution diffusion tensor imaging. This problem can be better visualized from the FA map, from which no contrast information can be acquired. 3 row of Fig. 1 shows the iCORNOL reconstructed image using the same set of under sampled data as 2 row. Blurring and aliasing artifacts are largely alleviated, structure information and contrast are mostly preserved. Moreover, SNR loss is much smaller compared to images reconstructed from CG-SENSE. Parallel imaging based on SENSE reconstruction provides a choice to reduce the total scan time but may introduce amplified noise that can dramatically degrade the quality of final images, regularization alleviates the problem by imposing priors on parallel imaging reconstruction. iCORNOL, which is exclusively tailored for VDS, uses intrastructure smoothness to preserve the image structure and reduces noise, and achieves significant improvements of image quality in this experiment. VDS is one of optimal choices for multi-shot diffusion weighted imaging due to its self-navigating capability and insensitivity to motion. Another advantage of variable density trajectory is the incoherent undersampling artifacts, which make it suitable for nonlinear reconstruction methods. One drawback of VDS is its sensitivity to eddy current. This problem could be lessened by measuring spiral trajectories, which were widely studied. CONCLUSIONS: A high spatio-temporal resolution DTI sequence was implemented on Philips 3T clinical scanner and iCORNOL was applied for the highly accelerated acquisition reconstruction. Previous studies using parallel imaging method for high resolution DTI had a reduction factor up to 3 [6]. Our preliminary results demonstrated that scan time can be further reduced by a factor of four with well-reserved structure details and considerable high SNR. Further studies are needed to optimize the sequence parameter and reconstruction algorithm. ACKNOWLEDGEMENT: This work is supported by National Key Technology R&D Program in the 12th Five year Plan. The authors would like to thank Dr. Dong-hyun Kim for helpful discussions. REFERENCE: [1] Dong-hyun Kim et al. MRM 2003; 50:214-219. [2] Chunlei Liu et al. MRM 2004; 52:1388-1396 [3] Pruessmann KP et al. MRM 1999; 42:952-962. [4] Sheng Fang et al. MRM 2010; 64:1414-1426. [5] Pruessmann KP et al. MRM 2001; 46:638-651; [6] Chunlei Liu et al. MRM 2004; 52:1388-1396. b = 0 DWI Trace map FA map

The Effect of Spatial Resolution on the Reproducibility of Diffusion Imaging when Controlled Signal to Noise Ratio

Analysis of the effects of noise, DWI sampling, and value of assumed parameters in diffusion MRI models

3D Isotropic Resolution Diffusion-Prepared Magnitude-Stabilized Bssfp Imaging with High Geometric Fidelity at 1.5 Tesla

Reproducibility of the Standard Model of diffusion in white matter on clinical MRI systems

Angular Resolution Enhancement of Diffusion MRI Data Using Inter-Subject Information Transfer.

Distortion-Free Diffusion MRI using an MRI-Guided Tri-Cobalt 60 Radiotherapy System: Sequence Verification and Preliminary Clinical Experience.

Same Brain, Different Look?—The Impact of Scanner, Sequence and Preprocessing on Diffusion Imaging Outcome Parameters

Experimental Demonstration of Diffusion Limitations on Resolution and SNR in MR Microscopy

Test-retest reliability of diffusion measures in cerebral white matter: A multiband diffusion MRI study.

High-resolution diffusion-weighted imaging at 7 Tesla: single-shot readout trajectories and their impact on signal-to-noise ratio, spatial resolution and accuracy

Diffusion MRI: Assessment of the Impact of Acquisition and Preprocessing Methods Using the BrainVISA-Diffuse Toolbox

Resolution and b value dependent structural connectome in ex vivo mouse brain

Effects of nongaussian diffusion on "isotropic diffusion measurements'': an ex-vivo microimaging and simulation study

High-resolution diffusion-weighted imaging with interleaved variable-density spiral acquisitions

Denoising Improves Cross-Scanner and Cross-Protocol Test-Retest Reproducibility of Higher-Order Diffusion Metrics

Effect of ROI on Apparent Diffusion Coefficient Quantitative Measurement of Human Brain with FLAIR-DWI

Robustness of Quantitative Diffusion Metrics from Four Models: A Prospective Study on the Influence of Scan‐Rescans, Voxel Size, Coils, and Observers

Sensitivity of quantitative diffusion MRI tractography and microstructure to anisotropic spatial sampling

High Resolution DTI using Highly Undersampled Variable Desnity Acquisition and iCORNOL Reconstruction

Diffusion dispersion imaging: Mapping oscillating gradient spin‐echo frequency dependence in the human brain

Inversion‐Recovery‐Prepared Oscillating Gradient Sequence Improves Diffusion‐Time Dependency Measurements in the Human Brain