Study on dynamic behavior of tubular T-joints subjected to out-of-plane impact loading
Peng Deng,Shiqi Zhao,Zhongyi Zhu,Yan Liu,Xiaoxue Liu
DOI: https://doi.org/10.1016/j.jcsr.2022.107556
IF: 4.349
2022-11-01
Journal of Constructional Steel Research
Abstract:In this study, the failure mode, impact resistance, and other key factors affecting the deformation of T-shaped circular steel tubular joints subjected to out-of-plane impacts are studied using a combination of numerical and analytical methods. The finite element (FE) analysis for circular hollow section (CHS) tubular T-joints subjected to in-plane impact is carried out. The simulation results are in good agreement with the test results, and the error is <6%. For common joint sizes in engineering, 63 FE models of CHS tubular T-joints subjected to out-of-plane impacts are created, and the deformation patterns and impact force development processes are described. In particular, following previous research into the deformation laws of steel tube structures, this study proposes a modified equal area axis method and utilizes it to distinguish the bending displacement and local indentation. Using the displacement changes and research results for T-joint failure modes, the criteria for judging the failure modes of the specimen are proposed, and the failure mode is categorized into three types. By discussing the influence of four parameters [length-to-diameter ratio of the chord (α), diameter ratio of the brace-to-chord (β), impact energy (Ek), and length-to-diameter ratio of the brace (αh)] upon the joint deformation of the specimen, a prediction formula for the global and local deformation of a T-shaped steel tube joint under out-of-plane impact loads with respect to the four abovementioned parameters is obtained via data fitting, and the accuracy of the formula is verified via error analysis.
construction & building technology,engineering, civil