Abstract:ZrC precursor was synthesized by a solution approach using ZrOCl2·8H2O, acetylacetonate, glycerol and boron-modified phenolic resin. A ZrC yield of ~ 40.56wt% was obtained at 1500°C in the C/Zr molar ratio of 1:1. C/C-ZrC-SiC composites were fabricated by a combined processes of chemical vapor infiltration (CVI) and precursor infiltration and pyrolysis (PIP) using the synthesized ZrC precursor. For comparison, C/C-SiC composites were prepared by CVI. Thermogravimetric analysis showed that C/C-ZrC-SiC composites exhibited better oxidation resistance than C/C-SiC composites. After oxyacetylene torch ablation, the mass ablation rate of C/C-ZrC-SiC composites was 9.23% lower than that of C/C-SiC composites. The porous ZrO2 skeleton in the ablation center was prone to be peeled off by the flame flow, resulting in the higher linear ablation rate of C/C-ZrC-SiC composites. The oxide layers of ZrO2 and SiO2 were formed on the transition and brim region of C/C-ZrC-SiC composites and acted as effective heat and oxygen barriers. For C/C-SiC composites, the C-SiC matrix was severely depleted in the ablation center and the formed SiO2 layer in the brim region could protect the matrix against further ablation.

Preparation of ZrC-SiC Composite Coatings by Chemical Vapor Deposition and Study of Co-Deposition Mechanism

Effect of Deposition Parameters on Morphology and Composition of Chemical Vapor Deposited ZrC Coatings

Deposition Mechanism for Chemical Vapor Deposition of Zirconium Carbide Coatings

Chemical Vapor Deposition (CVD) of ZrC Coatings from ZrCl 4 -C 3 H 6 -H 2

Chemical Vapor Deposition (CVD) of ZrC Coatings from ZrCl<sub>4</sub>-C<sub>3</sub>H<sub>6</sub>-H<sub>2</sub>

Preparation and Microstructure of ZrC Coatings for C/C Composites

Effect of Deposition Time on Growth of Zrc/Sic Composite Coating Synthesized by Low Pressure Chemical Vapor Deposition

Thermodynamic Analysis on the Codeposition of ZrC–SiC by Chemical Vapor Deposition Using the ZrCl4–C3H6–MTS–H2–Ar System

Study on the Morphology and Deposition Mechanism of SiC-MoSi2 Coating Deposited by LPCVD

Preparation of Silicon Carbide Coating by Chemical Vapor Deposition by Using Hexamethyldisilylamine Precursor

Thermodynamic Analysis of Chemical Vapor Deposition Process for ZrC Coating

Influences of deposition temperature, gas flow rate and ZrC content on the microstructure and anti-ablation performance of CVD-HfC-ZrC coating

Microstructure and Properties of ZrC-SiC Multi-Phase Coatings Prepared by Thermal Evaporation Deposition and an In-Situ Reaction Method

CVD Al2O3-SiO2 compound and the mechanism investigation

Oxidation Behavior of Co-Deposited ZrC Modified C/C Composites Prepared by Chemical Liquid-Vapor Infiltration Process

A Low-Temperature Preparation Strategy of SiC/ZrB2-CrSi2-Si/SiC Multilayer Oxidation-Resistant Coating for C/C Composites: Process, Kinetics and Mechanism Research

Preparation, Ablation Behavior and Mechanism of C/C-ZrC-SiC and C/C-SiC Composites

Preparation and Ablation Behavior of HfC-SiC Co-Deposited Coatings with Different Proportions

PREPARATION OF Zr-Si-C COATING BY CHEMICAL VAPOR REACTION METHOD

Preparation of Co-Deposited C/C-Zrc Composites by Clvd Process and Its Properties

Microstructural Control of Zirconium Carbide Coating Prepared by Chemical Vapor Deposition