NiO-based sensor for in situ CO monitoring above 1000 °C: behavior and mechanism
Yi Wang,Liang Ma,Wei Li,Angela M. Deibel,Wenyuan Li,Hanchen Tian,Xingbo Liu
DOI: https://doi.org/10.1007/s42114-022-00480-9
IF: 11.806
2022-05-05
Advanced Composites and Hybrid Materials
Abstract:An advanced smart sensor network is essential to a combustion system, which favors in situ, locally placed, and low-cost gas sensors. However, most chemical/electrochemical sensors fail to work in a combustion boiler, due to demanding operation temperatures (> 1000 °C). This work, for the first time, reports a well-functioning mixed-potential type CO sensor at 1000–1200 °C using nickel oxide (NiO) as the sensing material on the yttrium-stabilized zirconium (YSZ) oxide electrolyte. The influences of feed flow rate, electrode thickness, and porosity on the sensor behavior were investigated and the developed mixed potential gas sensor delivered notable and fast responses to 1000 ppm CO in 3% O2: 109 mV @1000 °C, 40 mV @1100 °C, and 7 mV @1200 °C. The sensing mechanism was identified different from the common theory based on CO oxidation coupled with oxygen reduction. A new mechanism is attributed to the inverse reactions: CO reduction coupled with oxygen evolution. For the first time, an inversion temperature was found for the CO-NiO reaction. Below the inversion temperature, CO oxidation occurs as commonly presented. Above the inversion temperature, CO is electrochemically reduced over NiO into carbon and oxygen ions, evidenced by electrochemical and compositional characterizations. The results can complement CO sensing mechanisms for mixed potential sensors and further trigger more research efforts to expand the working temperature limit of mixed potential sensors for practical application in combustion control systems.Graphical abstractBelow the inversion temperature, CO oxidationoccurs. Above the inversion temperature, CO is electrochemically reduced overNiO into carbon and oxygen ions. The results can complement CO sensingmechanisms for mixed potential sensors.
nanoscience & nanotechnology,materials science, composites