Abstract:In the mixed-potential gas sensor, the electrode type, particle size, microstructural morphology, as well as the interface state between the oxide-sensitive electrode and the solid electrolyte, are the key factors for determining the magnitude of the mixed potential. NiO-based material with the addition of Y2O3-stabilized 2 O 3-stabilized ZrO2 2 (YSZ) particles is considered as one of the promising sensitive electrode materials for preparing the mixed-potential NOx x sensors due to its excellent gas sensitivity. In this paper, the preparation technology of NiO-sensitive electrodes is developed and optimized for improving NOx x (NO and NO2) 2 ) gas-sensitivity properties of the NOx x sensors. The experimental results show that the addition of YSZ can effectively improve the agglomeration morphology of NiO particles in the NOx-YSZ-based x-YSZ-based electrode material during high temperature sintering (i.e. 1200 degrees C) and enhance the bonding strength with the solid electrolyte. The sensor which was prepared by using the developed NOx-YSZ-based x-YSZ-based electrode material with the YSZ addition of 20 wt% has the most sensitive response characteristic to NO gas, and its response potential value increases with NO gas concentration. Elevating electrode sintering temperature can increase the size of NiO particles and shorten the length of the three-phase boundary (TPB) in the sensitive electrode. The average length of TPB is the longest in the sensitive electrode sintered at 1000 degrees C which corresponds to the best sensitive response to NO gas. The sensitive electrode's thickness also affects the NO response sensitivity, and the sensor with an electrode thickness of 14 mu m has the most NO response sensitivity. In addition, the NO/NO2 2 gas mixture test results indicate that the current developed sensor is more sensitive to NO2 2 gas than that of NO gas.

Mixed-potential Type NO<inf>x</inf> Sensor Using Stabilized Zirconia and Cr<inf>2</inf>O<inf>3</inf>-WO<inf>3</inf> Nanocomposites

Mixed-potential type NOx sensor using stabilized zirconia and MoO3–In2O3 nanocomposites

Mixed Potential Type Sensor Using Stabilized Zirconia and La<sub>0.75</sub>Sr<sub>0.25</sub>Cr<sub>0.5</sub>Mn<sub>0.5</sub>O<sub>3</sub> Sensing Electrode for NO<sub>2</sub> Detection

Mixed potential type sensor using stabilized zirconia and La 0.75Sr0.25Cr0.5Mn0.5O3 sensing electrode for NO2 detection

Mixed-potential-type YSZ-based Sensor with Nano-Structured NiO and Porous TPB Processed with Pore-Formers Using Coating Technique

High-Temperature Stabilized Zirconia-Based Sensors Utilizing Mnb2o6 (M: Co, Ni and Zn) Sensing Electrodes for Detection of No2

Mixed-potential-type NO2 Sensors Based on Stabilized Zirconia and CeO2-B2O3 (B = Fe, Cr) Binary Nanocomposites Sensing Electrodes

Effects of WO 3 Electrode Microstructure on NO 2 -Sensing Properties for a Potentiometric Sensor

Nox Sensing Performances of Mixed-Potential-Type Gas Sensor Based on Stabilized-Zirconia and La5/3sr1/3nio4 Sensing Electrode

NO<sub>x</sub> Sensing Performances of Mixed-Potential-Type Gas Sensor Based on Stabilized-Zirconia and La<sub>5/3</sub>Sr<sub>1/3</sub>NiO<sub>4</sub> Sensing Electrode

Mixed Potential Type NO x Sensor Based on Stabilized Zirconia and Oxide Electrode

Mixed Potential Type YSZ-based NO2 Sensors with Efficient Three-Dimensional Three-Phase Boundary Processed by Electrospinning

The Effects of Sintering Temperature of Mncr2o4 Nanocomposite on the No2 Sensing Property for Ysz-Based Potentiometric Sensor

Mixed-potential Type NH3 Sensor Based on Stabilized Zirconia and Ni3V2O8 Sensing Electrode

Performance Improvement of NiO/YSZ Sensitive Electrode for High Temperature Electrochemical NOx Gas Sensors

High-performance of planar NO2 sensor using stabilized zirconia and NiO sensing electrode synthesized by microwave at high temperature

Stabilized Zirconia-Based Mixed Potential Type Sensors Utilizing MnNb2O6 Sensing Electrode for Detection of Low-Concentration SO2

Mixed Potential Type NO[sub x] Sensor Based on Stabilized Zirconia and Oxide Electrode

Mixed-potential Type NO2 Sensor Prepared with CuCr2O4-CuO Composite Sensing Electrode

Mixed-potential type NO2 sensor based on La10Si6O27 electrolyte and WO3 sensing electrode with different morphologies

Mixed-Potential-Type Zirconia-Based No2 Sensor with High-Performance Three-Phase Boundary

Mixed-potential Type NO&lt;inf&gt;x&lt;/inf&gt; Sensor Using Stabilized Zirconia and Cr&lt;inf&gt;2&lt;/inf&gt;O&lt;inf&gt;3&lt;/inf&gt;-WO&lt;inf&gt;3&lt;/inf&gt; Nanocomposites